From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH 05/14 v5] usb: typec: tcpci: Add set_vbus tcpci callback
Date: Mon, 24 Aug 2020 21:22:01 -0700 [thread overview]
Message-ID: <20200825042210.300632-6-badhri@google.com> (raw)
In-Reply-To: <20200825042210.300632-1-badhri@google.com>
set_vbus callback allows TCPC which are TCPCI based, however,
does not support turning on sink and source mode through
Command.SinkVbus and Command.SourceVbusDefaultVoltage.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
drivers/usb/typec/tcpm/tcpci.c | 7 +++++++
drivers/usb/typec/tcpm/tcpci.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 7b7991c8ac87..89d28e3fbee8 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -328,6 +328,13 @@ static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
int ret;
+ if (tcpci->data->set_vbus) {
+ ret = tcpci->data->set_vbus(tcpci, tcpci->data, source, sink);
+ /* Bypass when ret > 0 */
+ if (ret != 0)
+ return ret < 0 ? ret : 0;
+ }
+
/* Disable both source and sink first before enabling anything */
if (!source) {
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 04c49a0b0368..4d441bdf24d5 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -144,6 +144,7 @@ struct tcpci_data {
bool enable);
int (*start_drp_toggling)(struct tcpci *tcpci, struct tcpci_data *data,
enum typec_cc_status cc);
+ int (*set_vbus)(struct tcpci *tcpci, struct tcpci_data *data, bool source, bool sink);
};
struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
--
2.28.0.297.g1956fa8f8d-goog
next prev parent reply other threads:[~2020-08-25 4:23 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-25 4:21 [PATCH 00/14] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-08-25 4:21 ` [PATCH 01/14 v1] usb: typec: tcpci: Add register definitions to tcpci Badhri Jagan Sridharan
2020-08-25 4:21 ` [PATCH 02/14 v2] usb: typec: tcpci: Add support when hidden tx registers are inaccessible Badhri Jagan Sridharan
2020-08-28 13:12 ` Heikki Krogerus
2020-08-28 14:49 ` Badhri Jagan Sridharan
2020-08-25 4:21 ` [PATCH 03/14 v1] usb: typec: tcpci: update ROLE_CONTROL for DRP Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 04/14 v1] usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference Badhri Jagan Sridharan
2020-08-28 14:11 ` Heikki Krogerus
2020-08-25 4:22 ` Badhri Jagan Sridharan [this message]
2020-08-28 7:37 ` [PATCH 05/14 v5] usb: typec: tcpci: Add set_vbus tcpci callback Greg Kroah-Hartman
2020-08-25 4:22 ` [PATCH 06/14 v1] dt-bindings: usb: Maxim type-c controller device tree binding document Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 07/14 v1] usb: typec: tcpci_maxim: Chip level TCPC driver Badhri Jagan Sridharan
2020-08-25 5:16 ` Randy Dunlap
2020-08-28 14:51 ` Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 08/14 v1] dt-bindings: connector: Add property to set initial current cap for FRS Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 09/14 v1] usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) Badhri Jagan Sridharan
2020-08-26 12:42 ` kernel test robot
2020-08-25 4:22 ` [PATCH 10/14 v1] usb: typec: tcpci: Implement callbacks for FRS Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 11/14 v1] usb: typec: tcpci_maxim: Add support for Sink FRS Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 12/14] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support Badhri Jagan Sridharan
2020-08-28 14:13 ` Heikki Krogerus
2020-08-25 4:22 ` [PATCH 13/14 v1] usb: typec: tcpci: Implement Auto discharge disconnect callbacks Badhri Jagan Sridharan
2020-08-25 4:22 ` [PATCH 14/14 v1] usb: typec: tcpci_maxim: Implemnent set_auto_vbus_discharge_threshold Badhri Jagan Sridharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200825042210.300632-6-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).