linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v11 0/2] pwm: intel: Add PWM driver for a new SoC
@ 2020-08-25  5:07 Rahul Tanwar
  2020-08-25  5:07 ` [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
  2020-08-25  5:07 ` [PATCH v11 2/2] Add PWM fan controller driver for " Rahul Tanwar
  0 siblings, 2 replies; 5+ messages in thread
From: Rahul Tanwar @ 2020-08-25  5:07 UTC (permalink / raw)
  To: u.kleine-koenig, linux-pwm, lee.jones
  Cc: thierry.reding, p.zabel, robh+dt, linux-kernel, devicetree,
	andriy.shevchenko, songjun.Wu, cheol.yong.kim, qi-ming.wu,
	rahul.tanwar.linux, rtanwar, Rahul Tanwar

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3397 bytes --]

Patch 1 adds dt binding document in YAML format.
Patch 2 add PWM fan controller driver for LGM SoC.

v11:
- Address below review concerns (Andy Shevchenko)
  * Fix a issue with dev_err_probe() usage & improve the usage.
  * Fix & improve a ordering issue with clk_enable/disable &
    reset_control assert/deassert.

v10:
- Removed unused of_device.h and added platform_device.h
  & mod_devicetable.h

v9:
- Address code quality related review concerns (Andy Shevchenko)
- Use devm_add_action_or_reset() instead of explicit unwind calls.

v8:
- Remove fan related optional properties usage, keep
  them as default. If needed, change pwm-fan driver
  separately in future to add them as generic properties.

v7:
- Address code quality related review concerns.
- Rename fan related property to pwm-*.
- Fix one make dt_binding_check reported error.

v6:
- Readjust .apply op as per review feedback.
- Add back pwm-cells property to resolve make dt_binding_check error.
  pwm-cells is a required property for PWM driver.
- Add back fan related optional properties.

v5:
- Address below review concerns from Uwe Kleine-König.
  * Improve comments about Limitations.
  * Use return value of regmap_update_bits if container function returns
    error code.
  * Modify .apply op to have strict checking for fixed period supported
    by PWM HW.
  * Use u64 as type when use min_t for duty_cycle.
  * Add reset_control_assert() in failure case in probe where it was missing
    earlier.
- Remove fan specific optional properties from pwm dt binding document (Rob Herring)

v4:
- Address below review concerns from Uwe Kleine-König.
  * Improve notes and limitations comments.
  * Add common prefixes for all #defines.
  * Modify/Improve logic in .apply & .get_state ops as advised.
  * Skip error messages in probe when error is -EPROBE_DEFER.
  * Add dependencies in Kconfig (OF & HAS_IOMEM) and add select REGMAP_MMIO.
  * Address other code quality related review concerns.
- Fix make dt_binding_check reported error in YAML file.

v3:
- Address below review concerns from Uwe Kleine-König.
  * Remove fan rpm calibration task from the driver.
  * Modify apply op as per the review feedback.
  * Add roundup & round down where necessary.
  * Address other misc code quality related review concerns.
  * Use devm_reset_control_get_exclusive(). (Philipp Zabel)
  * Improve dt binding document.

v2:
- Address below review concerns from Uwe Kleine-König.
  * Add notes and limitations about PWM HW.
  * Rename all functions and structure to lgm_pwm_* 
  * Readjust space aligninment in structure fields to single space.
  * Switch to using apply instead of config/enable/disable.
  * Address other code quality related concerns.
  * Rebase to 5.8-rc1.
- Address review concerns in dt binding YAML from Rob Herring.

v1:
- Initial version.


Rahul Tanwar (2):
  Add DT bindings YAML schema for PWM fan controller of LGM SoC
  Add PWM fan controller driver for LGM SoC

 .../devicetree/bindings/pwm/intel,lgm-pwm.yaml     |  44 ++++
 drivers/pwm/Kconfig                                |  11 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-intel-lgm.c                        | 253 +++++++++++++++++++++
 4 files changed, 309 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
 create mode 100644 drivers/pwm/pwm-intel-lgm.c

-- 
2.11.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC
  2020-08-25  5:07 [PATCH v11 0/2] pwm: intel: Add PWM driver for a new SoC Rahul Tanwar
@ 2020-08-25  5:07 ` Rahul Tanwar
  2020-08-28 21:50   ` Rob Herring
  2020-08-25  5:07 ` [PATCH v11 2/2] Add PWM fan controller driver for " Rahul Tanwar
  1 sibling, 1 reply; 5+ messages in thread
From: Rahul Tanwar @ 2020-08-25  5:07 UTC (permalink / raw)
  To: u.kleine-koenig, linux-pwm, lee.jones
  Cc: thierry.reding, p.zabel, robh+dt, linux-kernel, devicetree,
	andriy.shevchenko, songjun.Wu, cheol.yong.kim, qi-ming.wu,
	rahul.tanwar.linux, rtanwar, Rahul Tanwar

Intel's LGM(Lightning Mountain) SoC contains a PWM fan controller
which is only used to control the fan attached to the system. This
PWM controller does not have any other consumer other than fan.
Add DT bindings documentation for this PWM fan controller.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
---
 .../devicetree/bindings/pwm/intel,lgm-pwm.yaml     | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml

diff --git a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
new file mode 100644
index 000000000000..11a606536169
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,lgm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LGM SoC PWM fan controller
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+properties:
+  compatible:
+    const: intel,lgm-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        #pwm-cells = <2>;
+        clocks = <&cgu0 126>;
+        resets = <&rcu0 0x30 21>;
+    };
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v11 2/2] Add PWM fan controller driver for LGM SoC
  2020-08-25  5:07 [PATCH v11 0/2] pwm: intel: Add PWM driver for a new SoC Rahul Tanwar
  2020-08-25  5:07 ` [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
@ 2020-08-25  5:07 ` Rahul Tanwar
  2020-08-25  9:57   ` Andy Shevchenko
  1 sibling, 1 reply; 5+ messages in thread
From: Rahul Tanwar @ 2020-08-25  5:07 UTC (permalink / raw)
  To: u.kleine-koenig, linux-pwm, lee.jones
  Cc: thierry.reding, p.zabel, robh+dt, linux-kernel, devicetree,
	andriy.shevchenko, songjun.Wu, cheol.yong.kim, qi-ming.wu,
	rahul.tanwar.linux, rtanwar, Rahul Tanwar

Intel Lightning Mountain(LGM) SoC contains a PWM fan controller.
This PWM controller does not have any other consumer, it is a
dedicated PWM controller for fan attached to the system. Add
driver for this PWM fan controller.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
---
 drivers/pwm/Kconfig         |  11 ++
 drivers/pwm/Makefile        |   1 +
 drivers/pwm/pwm-intel-lgm.c | 253 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 265 insertions(+)
 create mode 100644 drivers/pwm/pwm-intel-lgm.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 7dbcf6973d33..4949c51fe90b 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -232,6 +232,17 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.
 
+config PWM_INTEL_LGM
+	tristate "Intel LGM PWM support"
+	depends on HAS_IOMEM
+	depends on (OF && X86) || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Generic PWM fan controller driver for LGM SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-intel-lgm.
+
 config PWM_IQS620A
 	tristate "Azoteq IQS620A PWM support"
 	depends on MFD_IQS62X || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 2c2ba0a03557..e9431b151694 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
 obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
diff --git a/drivers/pwm/pwm-intel-lgm.c b/drivers/pwm/pwm-intel-lgm.c
new file mode 100644
index 000000000000..8e9f8cd3b7fb
--- /dev/null
+++ b/drivers/pwm/pwm-intel-lgm.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Limitations:
+ * - The hardware supports fixed period which is dependent on 2/3 or 4
+ *   wire fan mode.
+ * - Supports normal polarity. Does not support changing polarity.
+ * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
+ *   keep track of running period.
+ * - When duty cycle is changed, PWM output may be a mix of previous setting
+ *   and new setting for the first period. From second period, the output is
+ *   based on new setting.
+ * - It is a dedicated PWM fan controller. There are no other consumers for
+ *   this PWM controller.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define LGM_PWM_FAN_CON0		0x0
+#define LGM_PWM_FAN_EN_EN		BIT(0)
+#define LGM_PWM_FAN_EN_DIS		0x0
+#define LGM_PWM_FAN_EN_MSK		BIT(0)
+#define LGM_PWM_FAN_MODE_2WIRE		0x0
+#define LGM_PWM_FAN_MODE_MSK		BIT(1)
+#define LGM_PWM_FAN_DC_MSK		GENMASK(23, 16)
+
+#define LGM_PWM_FAN_CON1		0x4
+#define LGM_PWM_FAN_MAX_RPM_MSK		GENMASK(15, 0)
+
+#define LGM_PWM_MAX_RPM			(BIT(16) - 1)
+#define LGM_PWM_DEFAULT_RPM		4000
+#define LGM_PWM_MAX_DUTY_CYCLE		(BIT(8) - 1)
+
+#define LGM_PWM_DC_BITS			8
+
+#define LGM_PWM_PERIOD_2WIRE_NS		(40 * NSEC_PER_MSEC)
+
+struct lgm_pwm_chip {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	struct clk *clk;
+	struct reset_control *rst;
+	u32 period;
+};
+
+static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lgm_pwm_chip, chip);
+}
+
+static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	struct regmap *regmap = pc->regmap;
+
+	return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
+				  enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
+}
+
+static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty_cycle, val;
+	int ret;
+
+	/*
+	 * The hardware only supports
+	 * normal polarity and fixed period.
+	 */
+	if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
+		return -EINVAL;
+
+	if (!state->enabled)
+		return lgm_pwm_enable(chip, 0);
+
+	duty_cycle = min_t(u64, state->duty_cycle, pc->period);
+	val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
+
+	ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
+				 FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
+	if (ret)
+		return ret;
+
+	return lgm_pwm_enable(chip, 1);
+}
+
+static void lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty, val;
+
+	state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
+					  LGM_PWM_FAN_EN_EN);
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->period = pc->period; /* fixed period */
+
+	regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
+	duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
+	state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
+}
+
+static const struct pwm_ops lgm_pwm_ops = {
+	.get_state = lgm_pwm_get_state,
+	.apply = lgm_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static void lgm_pwm_init(struct lgm_pwm_chip *pc)
+{
+	struct regmap *regmap = pc->regmap;
+	u32 con0_val;
+
+	con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
+	pc->period = LGM_PWM_PERIOD_2WIRE_NS;
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
+			   LGM_PWM_DEFAULT_RPM);
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
+			   con0_val);
+}
+
+static const struct regmap_config lgm_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static void lgm_clk_disable(void *data)
+{
+	struct lgm_pwm_chip *pc = data;
+
+	clk_disable_unprepare(pc->clk);
+}
+
+static int lgm_clk_enable(struct device *dev, struct lgm_pwm_chip *pc)
+{
+	int ret;
+
+	ret = clk_prepare_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_clk_disable, pc);
+}
+
+static void lgm_reset_control_assert(void *data)
+{
+	struct lgm_pwm_chip *pc = data;
+
+	reset_control_assert(pc->rst);
+}
+
+static int lgm_reset_control_deassert(struct device *dev, struct lgm_pwm_chip *pc)
+{
+	int ret;
+
+	ret = reset_control_deassert(pc->rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_reset_control_assert, pc);
+}
+
+static int lgm_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lgm_pwm_chip *pc;
+	void __iomem *io_base;
+	int ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
+
+	pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return dev_err_probe(dev, PTR_ERR(pc->regmap),
+				     "failed to init register map\n");
+
+	pc->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(pc->rst))
+		return dev_err_probe(dev, PTR_ERR(pc->rst),
+				     "failed to get reset control\n");
+
+	ret = lgm_reset_control_deassert(dev, pc);
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot deassert reset control\n");
+
+	pc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pc->clk))
+		return dev_err_probe(dev, PTR_ERR(pc->clk), "failed to get clock\n");
+
+	ret = lgm_clk_enable(dev, pc);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &lgm_pwm_ops;
+	pc->chip.npwm = 1;
+
+	lgm_pwm_init(pc);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to add PWM chip: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pc);
+	return 0;
+}
+
+static int lgm_pwm_remove(struct platform_device *pdev)
+{
+	struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&pc->chip);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id lgm_pwm_of_match[] = {
+	{ .compatible = "intel,lgm-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
+
+static struct platform_driver lgm_pwm_driver = {
+	.driver = {
+		.name = "intel-pwm",
+		.of_match_table = lgm_pwm_of_match,
+	},
+	.probe = lgm_pwm_probe,
+	.remove = lgm_pwm_remove,
+};
+module_platform_driver(lgm_pwm_driver);
-- 
2.11.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v11 2/2] Add PWM fan controller driver for LGM SoC
  2020-08-25  5:07 ` [PATCH v11 2/2] Add PWM fan controller driver for " Rahul Tanwar
@ 2020-08-25  9:57   ` Andy Shevchenko
  0 siblings, 0 replies; 5+ messages in thread
From: Andy Shevchenko @ 2020-08-25  9:57 UTC (permalink / raw)
  To: Rahul Tanwar
  Cc: u.kleine-koenig, linux-pwm, lee.jones, thierry.reding, p.zabel,
	robh+dt, linux-kernel, devicetree, songjun.Wu, cheol.yong.kim,
	qi-ming.wu, rahul.tanwar.linux, rtanwar

On Tue, Aug 25, 2020 at 01:07:06PM +0800, Rahul Tanwar wrote:
> Intel Lightning Mountain(LGM) SoC contains a PWM fan controller.
> This PWM controller does not have any other consumer, it is a
> dedicated PWM controller for fan attached to the system. Add
> driver for this PWM fan controller.

FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

Uwe, there is still room to improve but it's in category of nit-picks, from my
point of view code is okay to go.

> Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
> ---
>  drivers/pwm/Kconfig         |  11 ++
>  drivers/pwm/Makefile        |   1 +
>  drivers/pwm/pwm-intel-lgm.c | 253 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 265 insertions(+)
>  create mode 100644 drivers/pwm/pwm-intel-lgm.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 7dbcf6973d33..4949c51fe90b 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -232,6 +232,17 @@ config PWM_IMX_TPM
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm-imx-tpm.
>  
> +config PWM_INTEL_LGM
> +	tristate "Intel LGM PWM support"
> +	depends on HAS_IOMEM
> +	depends on (OF && X86) || COMPILE_TEST
> +	select REGMAP_MMIO
> +	help
> +	  Generic PWM fan controller driver for LGM SoC.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-intel-lgm.
> +
>  config PWM_IQS620A
>  	tristate "Azoteq IQS620A PWM support"
>  	depends on MFD_IQS62X || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 2c2ba0a03557..e9431b151694 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
>  obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
>  obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
>  obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
> +obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
>  obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
>  obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
>  obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
> diff --git a/drivers/pwm/pwm-intel-lgm.c b/drivers/pwm/pwm-intel-lgm.c
> new file mode 100644
> index 000000000000..8e9f8cd3b7fb
> --- /dev/null
> +++ b/drivers/pwm/pwm-intel-lgm.c
> @@ -0,0 +1,253 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Intel Corporation.
> + *
> + * Limitations:
> + * - The hardware supports fixed period which is dependent on 2/3 or 4
> + *   wire fan mode.
> + * - Supports normal polarity. Does not support changing polarity.
> + * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
> + *   keep track of running period.
> + * - When duty cycle is changed, PWM output may be a mix of previous setting
> + *   and new setting for the first period. From second period, the output is
> + *   based on new setting.
> + * - It is a dedicated PWM fan controller. There are no other consumers for
> + *   this PWM controller.
> + */
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/pwm.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +#define LGM_PWM_FAN_CON0		0x0
> +#define LGM_PWM_FAN_EN_EN		BIT(0)
> +#define LGM_PWM_FAN_EN_DIS		0x0
> +#define LGM_PWM_FAN_EN_MSK		BIT(0)
> +#define LGM_PWM_FAN_MODE_2WIRE		0x0
> +#define LGM_PWM_FAN_MODE_MSK		BIT(1)
> +#define LGM_PWM_FAN_DC_MSK		GENMASK(23, 16)
> +
> +#define LGM_PWM_FAN_CON1		0x4
> +#define LGM_PWM_FAN_MAX_RPM_MSK		GENMASK(15, 0)
> +
> +#define LGM_PWM_MAX_RPM			(BIT(16) - 1)
> +#define LGM_PWM_DEFAULT_RPM		4000
> +#define LGM_PWM_MAX_DUTY_CYCLE		(BIT(8) - 1)
> +
> +#define LGM_PWM_DC_BITS			8
> +
> +#define LGM_PWM_PERIOD_2WIRE_NS		(40 * NSEC_PER_MSEC)
> +
> +struct lgm_pwm_chip {
> +	struct pwm_chip chip;
> +	struct regmap *regmap;
> +	struct clk *clk;
> +	struct reset_control *rst;
> +	u32 period;
> +};
> +
> +static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
> +{
> +	return container_of(chip, struct lgm_pwm_chip, chip);
> +}
> +
> +static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
> +{
> +	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
> +	struct regmap *regmap = pc->regmap;
> +
> +	return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
> +				  enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
> +}
> +
> +static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			 const struct pwm_state *state)
> +{
> +	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
> +	u32 duty_cycle, val;
> +	int ret;
> +
> +	/*
> +	 * The hardware only supports
> +	 * normal polarity and fixed period.
> +	 */
> +	if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
> +		return -EINVAL;
> +
> +	if (!state->enabled)
> +		return lgm_pwm_enable(chip, 0);
> +
> +	duty_cycle = min_t(u64, state->duty_cycle, pc->period);
> +	val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
> +
> +	ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
> +				 FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
> +	if (ret)
> +		return ret;
> +
> +	return lgm_pwm_enable(chip, 1);
> +}
> +
> +static void lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> +			      struct pwm_state *state)
> +{
> +	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
> +	u32 duty, val;
> +
> +	state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
> +					  LGM_PWM_FAN_EN_EN);
> +	state->polarity = PWM_POLARITY_NORMAL;
> +	state->period = pc->period; /* fixed period */
> +
> +	regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
> +	duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
> +	state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
> +}
> +
> +static const struct pwm_ops lgm_pwm_ops = {
> +	.get_state = lgm_pwm_get_state,
> +	.apply = lgm_pwm_apply,
> +	.owner = THIS_MODULE,
> +};
> +
> +static void lgm_pwm_init(struct lgm_pwm_chip *pc)
> +{
> +	struct regmap *regmap = pc->regmap;
> +	u32 con0_val;
> +
> +	con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
> +	pc->period = LGM_PWM_PERIOD_2WIRE_NS;
> +	regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
> +			   LGM_PWM_DEFAULT_RPM);
> +	regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
> +			   con0_val);
> +}
> +
> +static const struct regmap_config lgm_pwm_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +};
> +
> +static void lgm_clk_disable(void *data)
> +{
> +	struct lgm_pwm_chip *pc = data;
> +
> +	clk_disable_unprepare(pc->clk);
> +}
> +
> +static int lgm_clk_enable(struct device *dev, struct lgm_pwm_chip *pc)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(pc->clk);
> +	if (ret)
> +		return ret;
> +
> +	return devm_add_action_or_reset(dev, lgm_clk_disable, pc);
> +}
> +
> +static void lgm_reset_control_assert(void *data)
> +{
> +	struct lgm_pwm_chip *pc = data;
> +
> +	reset_control_assert(pc->rst);
> +}
> +
> +static int lgm_reset_control_deassert(struct device *dev, struct lgm_pwm_chip *pc)
> +{
> +	int ret;
> +
> +	ret = reset_control_deassert(pc->rst);
> +	if (ret)
> +		return ret;
> +
> +	return devm_add_action_or_reset(dev, lgm_reset_control_assert, pc);
> +}
> +
> +static int lgm_pwm_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct lgm_pwm_chip *pc;
> +	void __iomem *io_base;
> +	int ret;
> +
> +	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
> +	if (!pc)
> +		return -ENOMEM;
> +
> +	io_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(io_base))
> +		return PTR_ERR(io_base);
> +
> +	pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
> +	if (IS_ERR(pc->regmap))
> +		return dev_err_probe(dev, PTR_ERR(pc->regmap),
> +				     "failed to init register map\n");
> +
> +	pc->rst = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(pc->rst))
> +		return dev_err_probe(dev, PTR_ERR(pc->rst),
> +				     "failed to get reset control\n");
> +
> +	ret = lgm_reset_control_deassert(dev, pc);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "cannot deassert reset control\n");
> +
> +	pc->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(pc->clk))
> +		return dev_err_probe(dev, PTR_ERR(pc->clk), "failed to get clock\n");
> +
> +	ret = lgm_clk_enable(dev, pc);
> +	if (ret) {
> +		dev_err(dev, "failed to enable clock\n");
> +		return ret;
> +	}
> +
> +	pc->chip.dev = dev;
> +	pc->chip.ops = &lgm_pwm_ops;
> +	pc->chip.npwm = 1;
> +
> +	lgm_pwm_init(pc);
> +
> +	ret = pwmchip_add(&pc->chip);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to add PWM chip: %pe\n", ERR_PTR(ret));
> +		return ret;
> +	}
> +
> +	platform_set_drvdata(pdev, pc);
> +	return 0;
> +}
> +
> +static int lgm_pwm_remove(struct platform_device *pdev)
> +{
> +	struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
> +	int ret;
> +
> +	ret = pwmchip_remove(&pc->chip);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id lgm_pwm_of_match[] = {
> +	{ .compatible = "intel,lgm-pwm" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
> +
> +static struct platform_driver lgm_pwm_driver = {
> +	.driver = {
> +		.name = "intel-pwm",
> +		.of_match_table = lgm_pwm_of_match,
> +	},
> +	.probe = lgm_pwm_probe,
> +	.remove = lgm_pwm_remove,
> +};
> +module_platform_driver(lgm_pwm_driver);
> -- 
> 2.11.0
> 

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC
  2020-08-25  5:07 ` [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
@ 2020-08-28 21:50   ` Rob Herring
  0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-08-28 21:50 UTC (permalink / raw)
  To: Rahul Tanwar
  Cc: robh+dt, u.kleine-koenig, andriy.shevchenko, rahul.tanwar.linux,
	thierry.reding, linux-pwm, lee.jones, qi-ming.wu, songjun.Wu,
	cheol.yong.kim, p.zabel, linux-kernel, rtanwar, devicetree

On Tue, 25 Aug 2020 13:07:05 +0800, Rahul Tanwar wrote:
> Intel's LGM(Lightning Mountain) SoC contains a PWM fan controller
> which is only used to control the fan attached to the system. This
> PWM controller does not have any other consumer other than fan.
> Add DT bindings documentation for this PWM fan controller.
> 
> Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
> ---
>  .../devicetree/bindings/pwm/intel,lgm-pwm.yaml     | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-08-28 21:50 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-25  5:07 [PATCH v11 0/2] pwm: intel: Add PWM driver for a new SoC Rahul Tanwar
2020-08-25  5:07 ` [PATCH v11 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
2020-08-28 21:50   ` Rob Herring
2020-08-25  5:07 ` [PATCH v11 2/2] Add PWM fan controller driver for " Rahul Tanwar
2020-08-25  9:57   ` Andy Shevchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).