From: Connor McAdams <conmanx360@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: conmanx360@gmail.com, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 18/20] ALSA: hda/ca0132 - Add AE-7 microphone selection commands.
Date: Tue, 25 Aug 2020 16:10:37 -0400 [thread overview]
Message-ID: <20200825201040.30339-19-conmanx360@gmail.com> (raw)
In-Reply-To: <20200825201040.30339-1-conmanx360@gmail.com>
Add AE-7 quirk data for setting of microphone. The AE-7 has no front
panel connector, so only rear-mic/line-in have new commands.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index dcc8d29d934c..8c6e38734489 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4997,6 +4997,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
tmp = FLOAT_THREE;
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
+ tmp = FLOAT_THREE;
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
tmp = FLOAT_ONE;
break;
@@ -5042,6 +5051,14 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case QUIRK_AE5:
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
break;
}
@@ -5051,7 +5068,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
if (ca0132_quirk(spec) == QUIRK_R3DI)
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
- tmp = FLOAT_ZERO;
+ if (ca0132_quirk(spec) == QUIRK_AE7)
+ tmp = FLOAT_THREE;
+ else
+ tmp = FLOAT_ZERO;
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
switch (ca0132_quirk(spec)) {
--
2.20.1
next prev parent reply other threads:[~2020-08-25 20:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-25 20:10 [PATCH v2 00/20] ALSA: hda/ca0132 - Add AE-7 support/Control cleanup Connor McAdams
2020-08-25 20:10 ` [PATCH v2 01/20] ALSA: hda/ca0132 - Cleanup ca0132_mmio_init function Connor McAdams
2020-08-25 20:10 ` [PATCH v2 02/20] ALSA: hda/ca0132 - Add speaker tuning initialization commands Connor McAdams
2020-08-25 20:10 ` [PATCH v2 03/20] ALSA: hda/ca0132 - Add surround channel config control Connor McAdams
2020-08-25 20:10 ` [PATCH v2 04/20] ALSA: hda/ca0132 - Add full-range speaker selection controls Connor McAdams
2020-08-25 20:10 ` [PATCH v2 05/20] ALSA: hda/ca0132 - Add bass redirection controls Connor McAdams
2020-08-25 20:10 ` [PATCH v2 06/20] ALSA: hda/ca0132 - Remove surround output selection Connor McAdams
2020-08-25 20:10 ` [PATCH v2 07/20] ALSA: hda/ca0132 - Clean up ca0132_alt_out_select Connor McAdams
2020-08-25 20:10 ` [PATCH v2 08/20] ALSA: hda/ca0132 - Add quirk output selection structures Connor McAdams
2020-08-25 20:10 ` [PATCH v2 09/20] ALSA: hda/ca0132 - Fix Recon3D Center/LFE output Connor McAdams
2020-08-25 20:10 ` [PATCH v2 10/20] ALSA: hda/ca0132 - Add new quirk ID for SoundBlaster AE-7 Connor McAdams
2020-08-25 20:10 ` [PATCH v2 11/20] ALSA: hda/ca0132 - Add SoundBlaster AE-7 pincfg Connor McAdams
2020-08-25 20:10 ` [PATCH v2 12/20] ALSA: hda/ca0132 - Set AE-7 bools and select mixer Connor McAdams
2020-08-25 20:10 ` [PATCH v2 13/20] ALSA: hda/ca0132 - Add ca0132_mmio_init data for SoundBlaster AE-7 Connor McAdams
2020-08-25 20:10 ` [PATCH v2 14/20] ALSA: hda/ca0132 - Add pre-init function " Connor McAdams
2020-08-25 20:10 ` [PATCH v2 15/20] ALSA: hda/ca0132 - Add init data " Connor McAdams
2020-08-25 20:10 ` [PATCH v2 16/20] ALSA: hda/ca0132 - Add DSP setup functions for AE-7 Connor McAdams
2020-08-25 20:10 ` [PATCH v2 17/20] ALSA: hda/ca0132 - Add output selection for SoundBlaster AE-7 Connor McAdams
2020-08-25 20:10 ` Connor McAdams [this message]
2020-08-25 20:10 ` [PATCH v2 19/20] ALSA: hda/ca0132 - Add AE-7 custom controls Connor McAdams
2020-08-25 20:10 ` [PATCH v2 20/20] ALSA: hda/ca0132 - Add AE-7 exit commands Connor McAdams
2020-08-26 8:30 ` [PATCH v2 00/20] ALSA: hda/ca0132 - Add AE-7 support/Control cleanup Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200825201040.30339-19-conmanx360@gmail.com \
--to=conmanx360@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).