From: Stephen Boyd <swboyd@chromium.org>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Jeykumar Sankaran <jsanka@codeaurora.org>,
Chandan Uddaraju <chandanu@codeaurora.org>,
Vara Reddy <varar@codeaurora.org>,
Tanmay Shah <tanmay@codeaurora.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Manu Gautam <mgautam@codeaurora.org>,
Sandeep Maheswaram <sanm@codeaurora.org>,
Douglas Anderson <dianders@chromium.org>,
Sean Paul <seanpaul@chromium.org>,
Jonathan Marek <jonathan@marek.ca>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Rob Clark <robdclark@chromium.org>
Subject: [PATCH v2 08/10] phy: qcom-qmp: Add support for sc7180 DP phy
Date: Wed, 2 Sep 2020 16:02:13 -0700 [thread overview]
Message-ID: <20200902230215.3452712-9-swboyd@chromium.org> (raw)
In-Reply-To: <20200902230215.3452712-1-swboyd@chromium.org>
Add the necessary compatible strings and phy data for the sc7180 USB3+DP
combo phy.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 123 ++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index a946b9d54673..68535a9eb546 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -947,6 +947,88 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
};
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
@@ -2223,6 +2305,40 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.is_dual_lane_phy = true,
};
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -3747,6 +3863,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sc7180-qmp-usb3-phy",
.data = &sc7180_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
}, {
.compatible = "qcom,sdm845-qhp-pcie-phy",
.data = &sdm845_qhp_pciephy_cfg,
@@ -3789,6 +3908,10 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
{ }
};
--
Sent by a computer, using git, on the internet
next prev parent reply other threads:[~2020-09-02 23:03 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-02 23:02 [PATCH v2 00/10] Support qcom USB3+DP combo phy (or type-c phy) Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 01/10] dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 02/10] phy: qcom-qmp: Move phy mode into struct qmp_phy Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 03/10] phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 04/10] phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 05/10] phy: qcom-qmp: Get dp_com I/O resource by index Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 06/10] phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 07/10] phy: qcom-qmp: Add support for DP in USB3+DP combo phy Stephen Boyd
2020-09-03 20:43 ` Jonathan Marek
2020-09-03 22:41 ` Stephen Boyd
2020-09-03 23:24 ` Jonathan Marek
2020-09-04 12:29 ` Dmitry Baryshkov
2020-09-04 12:44 ` Jonathan Marek
2020-09-04 12:57 ` Dmitry Baryshkov
2020-09-04 13:02 ` Jonathan Marek
2020-09-03 23:26 ` Jonathan Marek
2020-09-08 18:42 ` Stephen Boyd
2020-09-02 23:02 ` Stephen Boyd [this message]
2020-09-03 23:29 ` [PATCH v2 08/10] phy: qcom-qmp: Add support for sc7180 DP phy Jonathan Marek
2020-09-08 18:44 ` Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 09/10] clk: qcom: dispcc: Update DP clk ops for phy design Stephen Boyd
2020-09-02 23:02 ` [PATCH v2 10/10] drm/msm/dp: Use qmp phy for DP PLL and PHY Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200902230215.3452712-9-swboyd@chromium.org \
--to=swboyd@chromium.org \
--cc=bjorn.andersson@linaro.org \
--cc=chandanu@codeaurora.org \
--cc=dianders@chromium.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=jonathan@marek.ca \
--cc=jsanka@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mgautam@codeaurora.org \
--cc=robdclark@chromium.org \
--cc=sanm@codeaurora.org \
--cc=seanpaul@chromium.org \
--cc=tanmay@codeaurora.org \
--cc=varar@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).