From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 746CEC2BC0E for ; Thu, 3 Sep 2020 17:14:29 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3AA1820775 for ; Thu, 3 Sep 2020 17:14:29 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="DT+XR+ZL" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729133AbgICRO1 (ORCPT ); Thu, 3 Sep 2020 13:14:27 -0400 Received: from lelv0142.ext.ti.com ([198.47.23.249]:49170 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729043AbgICROG (ORCPT ); Thu, 3 Sep 2020 13:14:06 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 083HDuHr042766; Thu, 3 Sep 2020 12:13:56 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1599153236; bh=o2SKZTlsFfti7PhMP7wZOU+gCRDzCz94UhoaCdp/9lE=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=DT+XR+ZLOxbMt+13W/PcgAE1IshW7CskavY3KRhjaHot4h++y2MdT+6C34h+mWb4e IMqRAFQsRNEUZec7plkIamO6LwTWP8lU8/GdSQdqpnJWbjC39A3lf6Yo+thQCmR22Z CL6KUpYPF6axyMNB/kMMAw+Mf9J+K9d9erhZiFss= Received: from DFLE112.ent.ti.com (dfle112.ent.ti.com [10.64.6.33]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 083HDuCs034767 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 3 Sep 2020 12:13:56 -0500 Received: from DFLE115.ent.ti.com (10.64.6.36) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Thu, 3 Sep 2020 12:13:56 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE115.ent.ti.com (10.64.6.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Thu, 3 Sep 2020 12:13:56 -0500 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 083HDDQ8088669; Thu, 3 Sep 2020 12:13:53 -0500 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , "open list:SPI NOR SUBSYSTEM" , open list CC: Pratyush Yadav , Sekhar Nori , Boris Brezillon Subject: [PATCH v12 13/14] mtd: spi-nor: spansion: add support for Cypress Semper flash Date: Thu, 3 Sep 2020 22:43:12 +0530 Message-ID: <20200903171313.18741-14-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200903171313.18741-1-p.yadav@ti.com> References: <20200903171313.18741-1-p.yadav@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. The flash by default boots in a hybrid sector mode. But the sector map table on the part I had was programmed incorrectly and the SMPT values on the flash don't match the public datasheet. Specifically, in some places erase type 3 was used instead of 4. In addition, the region sizes were incorrect in some places. So, for testing I set CFR3N[3] to enable uniform sector sizes. Since the uniform sector mode bit is a non-volatile bit, this series does not change it to avoid making any permanent changes to the flash configuration. The correct data to implement a fixup is not available right now and will be done in a follow-up patch if needed. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/spansion.c | 166 +++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c index 8429b4af999a..a34e250ea5a2 100644 --- a/drivers/mtd/spi-nor/spansion.c +++ b/drivers/mtd/spi-nor/spansion.c @@ -8,6 +8,167 @@ #include "core.h" +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24 0xb +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0 +#define SPINOR_OP_CYPRESS_RD_FAST 0xee + +/** + * spi_nor_cypress_octal_dtr_enable() - Enable octal DTR on Cypress flashes. + * @nor: pointer to a 'struct spi_nor' + * @enable: whether to enable or disable Octal DTR + * + * This also sets the memory access latency cycles to 24 to allow the flash to + * run at up to 200MHz. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor, bool enable) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width; + int ret; + + if (enable) + addr_width = 3; + else + addr_width = 4; + + if (enable) { + /* Use 24 dummy cycles for memory array reads. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR2V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, + "failed to set default memory latency value: %d\n", + ret); + return ret; + } + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + nor->read_dummy = 24; + } + + /* Set/unset the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (enable) + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + else + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR5V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + + if (!enable) + spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR); + + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); + return ret; + } + + return 0; +} + +static void s28hs512t_default_init(struct spi_nor *nor) +{ + nor->params->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable; +} + +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) +{ + /* + * On older versions of the flash the xSPI Profile 1.0 table has the + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. + */ + if (nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + SPINOR_OP_CYPRESS_RD_FAST; + + /* This flash is also missing the 4-byte Page Program opcode bit. */ + spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + + /* + * The xSPI Profile 1.0 table advertises the number of additional + * address bytes needed for Read Status Register command as 0 but the + * actual value for that is 4. + */ + nor->params->rdsr_addr_nbytes = 4; +} + +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* + * The BFPT table advertises a 512B page size but the page size is + * actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + params->page_size = 512; + else + params->page_size = 256; + + return 0; +} + +static struct spi_nor_fixups s28hs512t_fixups = { + .default_init = s28hs512t_default_init, + .post_sfdp = s28hs512t_post_sfdp_fixup, + .post_bfpt = s28hs512t_post_bfpt_fixup, +}; + static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, @@ -104,6 +265,11 @@ static const struct flash_info spansion_parts[] = { SPI_NOR_4B_OPCODES) }, { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1, SPI_NOR_NO_ERASE) }, + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, + SECT_4K | SPI_NOR_OCTAL_DTR_READ | + SPI_NOR_OCTAL_DTR_PP) + .fixups = &s28hs512t_fixups, + }, }; static void spansion_post_sfdp_fixups(struct spi_nor *nor) -- 2.25.0