* [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD
@ 2020-08-26 20:42 Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 1/2] dt-bindings: arm: fsl: add compatible string for " Andreas Kemnade
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Andreas Kemnade @ 2020-08-26 20:42 UTC (permalink / raw)
To: robh+dt, shawnguo, s.hauer, kernel, festevam, linux-imx, andreas,
Anson.Huang, marcel.ziswiler, sebastien.szymanski, michael,
rjones, leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
j.neuschaefer, letux-kernel
This adds a device tree for the Tolino Shine 2 HD Ebook reader.
It is equipped with an i.MX6SL SoC. Except for backlight (via an EC) and
the EPD, drivers are available and therefore things are defined in the
dts.
Andreas Kemnade (2):
dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
.../devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 588 ++++++++++++++++++
3 files changed, 590 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
--
2.20.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/2] dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
2020-08-26 20:42 [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD Andreas Kemnade
@ 2020-08-26 20:42 ` Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 2/2] ARM: dts: imx: add devicetree " Andreas Kemnade
2020-09-05 1:39 ` [PATCH v2 0/2] ARM: dts: add " Shawn Guo
2 siblings, 0 replies; 6+ messages in thread
From: Andreas Kemnade @ 2020-08-26 20:42 UTC (permalink / raw)
To: robh+dt, shawnguo, s.hauer, kernel, festevam, linux-imx, andreas,
Anson.Huang, marcel.ziswiler, sebastien.szymanski, michael,
rjones, leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
j.neuschaefer, letux-kernel
Cc: Rob Herring
This adds a compatible string for the Tolino Shine 2 HD eBook reader.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 05906e291e38..a3fb61868a16 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -211,6 +211,7 @@ properties:
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
+ - kobo,tolino-shine2hd
- kobo,tolino-shine3
- const: fsl,imx6sl
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ARM: dts: imx: add devicetree for Tolino Shine 2 HD
2020-08-26 20:42 [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 1/2] dt-bindings: arm: fsl: add compatible string for " Andreas Kemnade
@ 2020-08-26 20:42 ` Andreas Kemnade
2020-08-27 18:33 ` Jonathan Neuschäfer
2020-09-05 1:39 ` [PATCH v2 0/2] ARM: dts: add " Shawn Guo
2 siblings, 1 reply; 6+ messages in thread
From: Andreas Kemnade @ 2020-08-26 20:42 UTC (permalink / raw)
To: robh+dt, shawnguo, s.hauer, kernel, festevam, linux-imx, andreas,
Anson.Huang, marcel.ziswiler, sebastien.szymanski, michael,
rjones, leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
j.neuschaefer, letux-kernel
This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
SoC.
Expected to work:
- Buttons
- Wifi
- Touchscreen
- LED
- uSD
- USB
- RTC
Not working due to missing drivers:
- Backlight (requires NTXEC driver)
- EPD
Not working due to unknown reasons:
- deep sleep (echo standby >/sys/power/state works),
wakeup fails when imx_gpc_pre_suspend(true) was called.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
Changes in v2:
- better comments about internals
- avoid confusion about polarity of wifi enable pin
- newline cleanup
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 588 +++++++++++++++++++
2 files changed, 589 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..c65fa3852246 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -581,6 +581,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
+ imx6sl-tolino-shine2hd.dtb \
imx6sl-tolino-shine3.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SLL) += \
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
new file mode 100644
index 000000000000..caa279608803
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Shine 2 HD ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QF0+4A2 or 37NB-E60QF0+4A3
+ * Serials start with: E60QF2
+ *
+ * Copyright 2020 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "Tolino Shine 2 HD";
+ compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ cover {
+ label = "Cover";
+ gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+
+ fl {
+ label = "Frontlight";
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BRIGHTNESS_CYCLE>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ on {
+ label = "tolinoshine2hd:white:on";
+ gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_power>;
+ regulator-name = "SD3_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+ post-power-on-delay-ms = <20>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
+ status = "okay";
+
+ /* TODO: embedded controller at 0x43 (driver missing) */
+
+};
+
+&i2c2 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ zforce: touchscreen@50 {
+ compatible = "neonode,zforce";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_zforce>;
+ reg = <0x50>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ldo1_reg>;
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ x-size = <1072>;
+ y-size = <1448>;
+ };
+
+ /* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ricoh619: pmic@32 {
+ compatible = "ricoh,rc5t619";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
+ reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ system-power-controller;
+
+ regulators {
+ dcdc1_reg: DCDC1 {
+ regulator-name = "DCDC1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <900000>;
+ regulator-suspend-min-microvolt = <900000>;
+ };
+ };
+
+ /* Core3_3V3 */
+ dcdc2_reg: DCDC2 {
+ regulator-name = "DCDC2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3100000>;
+ regulator-suspend-min-microvolt = <3100000>;
+ };
+ };
+
+ dcdc3_reg: DCDC3 {
+ regulator-name = "DCDC3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V2 */
+ dcdc4_reg: DCDC4 {
+ regulator-name = "DCDC4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1140000>;
+ regulator-suspend-min-microvolt = <1140000>;
+ };
+ };
+
+ /* Core4_1V8 */
+ dcdc5_reg: DCDC5 {
+ regulator-name = "DCDC5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <1700000>;
+ regulator-suspend-min-microvolt = <1700000>;
+ };
+ };
+
+ /* IR_3V3 */
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-boot-on;
+ };
+
+ /* Core1_3V3 */
+ ldo2_reg: LDO2 {
+ regulator-name = "LDO2";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-max-microvolt = <3000000>;
+ regulator-suspend-min-microvolt = <3000000>;
+ };
+ };
+
+ /* Core5_1V2 */
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-boot-on;
+ };
+
+ /* SPD_3V3 */
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* DDR_0V6 */
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* VDD_PWM */
+ ldo7_reg: LDO7 {
+ regulator-name = "LDO7";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* ldo_1v8 */
+ ldo8_reg: LDO8 {
+ regulator-name = "LDO8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "LDO9";
+ regulator-boot-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "LDO10";
+ regulator-boot-on;
+ };
+
+ ldortc1_reg: LDORTC1 {
+ regulator-name = "LDORTC1";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_gpio_keys: gpio-keysgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059
+ MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x17059
+ MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x17059
+ MX6SL_PAD_KEY_ROW0__GPIO3_IO25 0x17059
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SL_PAD_LCD_DAT0__GPIO2_IO20 0x79
+ MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
+ MX6SL_PAD_LCD_DAT2__GPIO2_IO22 0x79
+ MX6SL_PAD_LCD_DAT3__GPIO2_IO23 0x79
+ MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
+ MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
+ MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
+ MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
+ MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
+ MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
+ MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
+ MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
+ MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
+ MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
+ MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
+ MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
+ MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
+ MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
+ MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
+ MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
+ MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
+ MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
+ MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
+ MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
+ MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
+ MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
+ MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
+ MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
+ MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79
+ MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c1_sleep: i2c1grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2_sleep: i2c2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+ >;
+ };
+
+ pinctrl_ricoh_gpio: ricoh_gpiogrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_CLK__GPIO5_IO15 0x1b8b1 /* ricoh619 chg */
+ MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x1b8b1 /* ricoh619 irq */
+ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9
+ MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9
+ MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9
+ MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9
+ MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9
+ MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
+ MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
+ MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
+ MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
+ MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
+ MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
+ >;
+ };
+
+ pinctrl_wifi_power: wifi-powergrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
+ >;
+ };
+
+ pinctrl_wifi_reset: wifi-resetgrp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
+ >;
+ };
+
+ pinctrl_zforce: zforcegrp {
+ fsl,pins = <
+ MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x17059 /* TP_INT */
+ MX6SL_PAD_SD1_DAT5__GPIO5_IO09 0x10059 /* TP_RST */
+ >;
+ };
+};
+
+®_vdd1p1 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_vdd2p5 {
+ vin-supply = <&dcdc2_reg>;
+};
+
+®_arm {
+ vin-supply = <&dcdc3_reg>;
+};
+
+®_soc {
+ vin-supply = <&dcdc1_reg>;
+};
+
+®_pu {
+ vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+ /*
+ * We are using the RTC in the PMIC, but this one is not disabled
+ * in imx6sl.dtsi.
+ */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+ non-removable;
+ status = "okay";
+
+ /* internal uSD card */
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+ vmmc-supply = <®_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ cap-power-off-card;
+ non-removable;
+ status = "okay";
+
+ /*
+ * 37NB-E60QF0+4A2: CyberTan WC121 (BCM43362) SDIO WiFi
+ * 37NB-E60QF0+4A3: RTL8189F SDIO WiFi
+ */
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx: add devicetree for Tolino Shine 2 HD
2020-08-26 20:42 ` [PATCH v2 2/2] ARM: dts: imx: add devicetree " Andreas Kemnade
@ 2020-08-27 18:33 ` Jonathan Neuschäfer
2020-08-31 17:26 ` Andreas Kemnade
0 siblings, 1 reply; 6+ messages in thread
From: Jonathan Neuschäfer @ 2020-08-27 18:33 UTC (permalink / raw)
To: Andreas Kemnade
Cc: robh+dt, shawnguo, s.hauer, kernel, festevam, linux-imx,
Anson.Huang, marcel.ziswiler, sebastien.szymanski, michael,
rjones, leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
j.neuschaefer, letux-kernel
[-- Attachment #1: Type: text/plain, Size: 1051 bytes --]
On Wed, Aug 26, 2020 at 10:42:51PM +0200, Andreas Kemnade wrote:
> This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
> on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
> SoC.
>
> Expected to work:
> - Buttons
> - Wifi
> - Touchscreen
> - LED
> - uSD
> - USB
> - RTC
>
> Not working due to missing drivers:
> - Backlight (requires NTXEC driver)
> - EPD
>
> Not working due to unknown reasons:
> - deep sleep (echo standby >/sys/power/state works),
> wakeup fails when imx_gpc_pre_suspend(true) was called.
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
[...]
> + fl {
> + label = "Frontlight";
> + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_BRIGHTNESS_CYCLE>;
> + };
Another option might be KEY_BRIGHTNESS_TOGGLE/KEY_DISPLAYTOGGLE, but
it's not a perfect match, either. (And perhaps a worse match due to the
connotation of turning the display off.)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Thanks
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/2] ARM: dts: imx: add devicetree for Tolino Shine 2 HD
2020-08-27 18:33 ` Jonathan Neuschäfer
@ 2020-08-31 17:26 ` Andreas Kemnade
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Kemnade @ 2020-08-31 17:26 UTC (permalink / raw)
To: Jonathan Neuschäfer
Cc: robh+dt, shawnguo, s.hauer, kernel, festevam, linux-imx,
Anson.Huang, marcel.ziswiler, sebastien.szymanski, michael,
rjones, leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
letux-kernel
Hi,
On Thu, 27 Aug 2020 20:33:23 +0200
Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote:
> On Wed, Aug 26, 2020 at 10:42:51PM +0200, Andreas Kemnade wrote:
> > This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
> > on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
> > SoC.
> >
> > Expected to work:
> > - Buttons
> > - Wifi
> > - Touchscreen
> > - LED
> > - uSD
> > - USB
> > - RTC
> >
> > Not working due to missing drivers:
> > - Backlight (requires NTXEC driver)
> > - EPD
> >
> > Not working due to unknown reasons:
> > - deep sleep (echo standby >/sys/power/state works),
> > wakeup fails when imx_gpc_pre_suspend(true) was called.
> >
> > Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> > ---
> [...]
> > + fl {
> > + label = "Frontlight";
> > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> > + linux,code = <KEY_BRIGHTNESS_CYCLE>;
> > + };
>
> Another option might be KEY_BRIGHTNESS_TOGGLE/KEY_DISPLAYTOGGLE, but
> it's not a perfect match, either. (And perhaps a worse match due to the
> connotation of turning the display off.)
>
I have also thought about these, but came to the same conclusion as you,
the connotation of turning the display off does not feel right.
>
> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
>
> Thanks
Regards,
Andreas
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD
2020-08-26 20:42 [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 1/2] dt-bindings: arm: fsl: add compatible string for " Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 2/2] ARM: dts: imx: add devicetree " Andreas Kemnade
@ 2020-09-05 1:39 ` Shawn Guo
2 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2020-09-05 1:39 UTC (permalink / raw)
To: Andreas Kemnade
Cc: robh+dt, s.hauer, kernel, festevam, linux-imx, Anson.Huang,
marcel.ziswiler, sebastien.szymanski, michael, rjones,
leoyang.li, devicetree, linux-kernel, linux-arm-kernel,
j.neuschaefer, letux-kernel
On Wed, Aug 26, 2020 at 10:42:49PM +0200, Andreas Kemnade wrote:
> This adds a device tree for the Tolino Shine 2 HD Ebook reader.
>
> It is equipped with an i.MX6SL SoC. Except for backlight (via an EC) and
> the EPD, drivers are available and therefore things are defined in the
> dts.
>
> Andreas Kemnade (2):
> dt-bindings: arm: fsl: add compatible string for Tolino Shine 2 HD
> ARM: dts: imx: add devicetree for Tolino Shine 2 HD
Applied both, thanks.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-09-05 1:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-26 20:42 [PATCH v2 0/2] ARM: dts: add Tolino Shine 2 HD Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 1/2] dt-bindings: arm: fsl: add compatible string for " Andreas Kemnade
2020-08-26 20:42 ` [PATCH v2 2/2] ARM: dts: imx: add devicetree " Andreas Kemnade
2020-08-27 18:33 ` Jonathan Neuschäfer
2020-08-31 17:26 ` Andreas Kemnade
2020-09-05 1:39 ` [PATCH v2 0/2] ARM: dts: add " Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).