From: Luka Kovacic <luka.kovacic@sartura.hr>
To: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-leds@vger.kernel.org
Cc: lee.jones@linaro.org, pavel@ucw.cz, dmurphy@ti.com,
robh+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net,
andrew@lunn.ch, jason@lakedaemon.net,
gregory.clement@bootlin.com, luka.perkov@sartura.hr,
Luka Kovacic <luka.kovacic@sartura.hr>
Subject: [PATCH 0/7] Add support for the iEi Puzzle-M801 board
Date: Sat, 5 Sep 2020 15:03:29 +0200 [thread overview]
Message-ID: <20200905130336.967622-1-luka.kovacic@sartura.hr> (raw)
This patchset adds support for the iEi Puzzle-M801 1U Rackmount Network
Appliance and for the iEi WT61P803 PUZZLE microcontroller, which enables
some board specific features like fan and LED control, system power
management and temperature sensor reading.
The platform is based on the popular Marvell Armada 8040 SoC and supports
up to 16 GB of DDR4 2400 MHz ECC RAM.
It has a PCIe x16 slot (x2 lanes only) and an M.2 type B slot.
External chassis ports:
2x 10 GbE SFP+
4x 1 GbE (Marvell 88E1512P)
2x USB 3.0
1x RJ45 serial port
All notable board components are supported in this patchset.
Luka Kovacic (7):
dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver
bindings
drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU
drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver
drivers: leds: Add the iEi WT61P803 PUZZLE LED driver
Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface
documentation
MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver
arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board
.../stable/sysfs-driver-iei-wt61p803-puzzle | 65 +
.../hwmon/iei,wt61p803-puzzle-hwmon.yaml | 41 +
.../leds/iei,wt61p803-puzzle-leds.yaml | 48 +
.../bindings/mfd/iei,wt61p803-puzzle.yaml | 82 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 13 +
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../dts/marvell/armada-8040-puzzle-m801.dts | 519 +++++++
drivers/hwmon/Kconfig | 8 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 613 ++++++++
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-iei-wt61p803-puzzle.c | 184 +++
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/iei-wt61p803-puzzle.c | 1242 +++++++++++++++++
include/linux/mfd/iei-wt61p803-puzzle.h | 27 +
18 files changed, 2864 insertions(+)
create mode 100644 Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
create mode 100644 Documentation/devicetree/bindings/hwmon/iei,wt61p803-puzzle-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/leds/iei,wt61p803-puzzle-leds.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/iei,wt61p803-puzzle.yaml
create mode 100644 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c
create mode 100644 drivers/leds/leds-iei-wt61p803-puzzle.c
create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c
create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h
--
2.20.1
next reply other threads:[~2020-09-05 13:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-05 13:03 Luka Kovacic [this message]
2020-09-05 13:03 ` [PATCH 1/7] dt-bindings: Add iEi vendor prefix and iEi WT61P803 PUZZLE driver bindings Luka Kovacic
2020-09-05 13:03 ` [PATCH 2/7] drivers: mfd: Add a driver for iEi WT61P803 PUZZLE MCU Luka Kovacic
2020-09-05 15:39 ` Randy Dunlap
2020-09-09 9:40 ` Lee Jones
2020-09-05 13:03 ` [PATCH 3/7] drivers: hwmon: Add the iEi WT61P803 PUZZLE HWMON driver Luka Kovacic
2020-09-05 15:24 ` Guenter Roeck
2020-09-05 13:03 ` [PATCH 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver Luka Kovacic
2020-09-08 22:22 ` Pavel Machek
2020-09-09 9:30 ` Andy Shevchenko
2020-09-09 10:36 ` Pavel Machek
2020-09-09 12:46 ` Andrew Lunn
2020-09-09 13:52 ` Andy Shevchenko
2020-09-09 18:34 ` Luka Kovačič
2020-09-05 13:03 ` [PATCH 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation Luka Kovacic
2020-09-05 13:03 ` [PATCH 6/7] MAINTAINERS: Add an entry for the iEi WT61P803 PUZZLE driver Luka Kovacic
2020-09-05 13:03 ` [PATCH 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board Luka Kovacic
2020-09-05 15:21 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200905130336.967622-1-luka.kovacic@sartura.hr \
--to=luka.kovacic@sartura.hr \
--cc=andrew@lunn.ch \
--cc=dmurphy@ti.com \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=luka.perkov@sartura.hr \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).