linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vlastimil Babka <vbabka@suse.cz>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, Michal Hocko <mhocko@kernel.org>,
	Pavel Tatashin <pasha.tatashin@soleen.com>,
	David Hildenbrand <david@redhat.com>,
	Oscar Salvador <osalvador@suse.de>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	Vlastimil Babka <vbabka@suse.cz>
Subject: [RFC 1/5] mm, page_alloc: clean up pageset high and batch update
Date: Mon,  7 Sep 2020 18:36:24 +0200	[thread overview]
Message-ID: <20200907163628.26495-2-vbabka@suse.cz> (raw)
In-Reply-To: <20200907163628.26495-1-vbabka@suse.cz>

The updates to pcplists' high and batch valued are handled by multiple
functions that make the calculations hard to follow. Consolidate everything
to pageset_set_high_and_batch() and remove pageset_set_batch() and
pageset_set_high() wrappers.

The only special case using one of the removed wrappers was:
build_all_zonelists_init()
  setup_pageset()
    pageset_set_batch()
which was hardcoding batch as 0, so we can just open-code a call to
pageset_update() with constant parameters instead.

No functional change.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
---
 mm/page_alloc.c | 51 +++++++++++++++++++------------------------------
 1 file changed, 20 insertions(+), 31 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index fab5e97dc9ca..0b516208afda 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5834,7 +5834,7 @@ static void build_zonelists(pg_data_t *pgdat)
  * not check if the processor is online before following the pageset pointer.
  * Other parts of the kernel may not check if the zone is available.
  */
-static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch);
+static void setup_pageset(struct per_cpu_pageset *p);
 static DEFINE_PER_CPU(struct per_cpu_pageset, boot_pageset);
 static DEFINE_PER_CPU(struct per_cpu_nodestat, boot_nodestats);
 
@@ -5902,7 +5902,7 @@ build_all_zonelists_init(void)
 	 * (a chicken-egg dilemma).
 	 */
 	for_each_possible_cpu(cpu)
-		setup_pageset(&per_cpu(boot_pageset, cpu), 0);
+		setup_pageset(&per_cpu(boot_pageset, cpu));
 
 	mminit_verify_zonelist();
 	cpuset_init_current_mems_allowed();
@@ -6218,12 +6218,6 @@ static void pageset_update(struct per_cpu_pages *pcp, unsigned long high,
 	pcp->batch = batch;
 }
 
-/* a companion to pageset_set_high() */
-static void pageset_set_batch(struct per_cpu_pageset *p, unsigned long batch)
-{
-	pageset_update(&p->pcp, 6 * batch, max(1UL, 1 * batch));
-}
-
 static void pageset_init(struct per_cpu_pageset *p)
 {
 	struct per_cpu_pages *pcp;
@@ -6236,35 +6230,30 @@ static void pageset_init(struct per_cpu_pageset *p)
 		INIT_LIST_HEAD(&pcp->lists[migratetype]);
 }
 
-static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
+static void setup_pageset(struct per_cpu_pageset *p)
 {
 	pageset_init(p);
-	pageset_set_batch(p, batch);
-}
-
-/*
- * pageset_set_high() sets the high water mark for hot per_cpu_pagelist
- * to the value high for the pageset p.
- */
-static void pageset_set_high(struct per_cpu_pageset *p,
-				unsigned long high)
-{
-	unsigned long batch = max(1UL, high / 4);
-	if ((high / 4) > (PAGE_SHIFT * 8))
-		batch = PAGE_SHIFT * 8;
-
-	pageset_update(&p->pcp, high, batch);
+	pageset_update(&p->pcp, 0, 1);
 }
 
 static void pageset_set_high_and_batch(struct zone *zone,
-				       struct per_cpu_pageset *pcp)
+				       struct per_cpu_pageset *p)
 {
-	if (percpu_pagelist_fraction)
-		pageset_set_high(pcp,
-			(zone_managed_pages(zone) /
-				percpu_pagelist_fraction));
-	else
-		pageset_set_batch(pcp, zone_batchsize(zone));
+	unsigned long new_high;
+	unsigned long new_batch;
+	int fraction = READ_ONCE(percpu_pagelist_fraction);
+
+	if (fraction) {
+		new_high = zone_managed_pages(zone) / fraction;
+		new_batch = max(1UL, new_high / 4);
+		if ((new_high / 4) > (PAGE_SHIFT * 8))
+			new_batch = PAGE_SHIFT * 8;
+	} else {
+		new_batch = zone_batchsize(zone);
+		new_high = 6 * new_batch;
+		new_batch = max(1UL, 1 * new_batch);
+	}
+	pageset_update(&p->pcp, new_high, new_batch);
 }
 
 static void __meminit zone_pageset_init(struct zone *zone, int cpu)
-- 
2.28.0


  reply	other threads:[~2020-09-07 16:40 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-07 16:36 [RFC 0/5] disable pcplists during page isolation Vlastimil Babka
2020-09-07 16:36 ` Vlastimil Babka [this message]
2020-09-10  8:31   ` [RFC 1/5] mm, page_alloc: clean up pageset high and batch update Oscar Salvador
2020-09-10  8:34     ` Oscar Salvador
2020-09-10 10:47     ` David Hildenbrand
2020-09-17 16:05     ` Vlastimil Babka
2020-09-07 16:36 ` [RFC 2/5] mm, page_alloc: calculate pageset high and batch once per zone Vlastimil Babka
2020-09-10  9:00   ` Oscar Salvador
2020-09-10 10:56   ` David Hildenbrand
2020-09-07 16:36 ` [RFC 3/5] mm, page_alloc(): remove setup_pageset() Vlastimil Babka
2020-09-10  9:23   ` Oscar Salvador
2020-09-10  9:57     ` Oscar Salvador
2020-09-18  9:37     ` Vlastimil Babka
2020-09-10 11:00   ` David Hildenbrand
2020-09-07 16:36 ` [RFC 4/5] mm, page_alloc: cache pageset high and batch in struct zone Vlastimil Babka
2020-09-10 11:30   ` Oscar Salvador
2020-09-18 12:02     ` Vlastimil Babka
2020-09-07 16:36 ` [RFC 5/5] mm, page_alloc: disable pcplists during page isolation Vlastimil Babka
2020-09-09 10:48   ` Vlastimil Babka
2020-09-09 11:36     ` Michal Hocko
2020-09-09 11:44       ` David Hildenbrand
2020-09-09 12:57         ` David Hildenbrand
2020-09-09 11:55       ` Vlastimil Babka
2020-09-10 10:29         ` David Hildenbrand
2020-09-10 11:05           ` Vlastimil Babka
2020-09-10 12:42             ` David Hildenbrand
2020-09-09 12:53       ` Pavel Tatashin
2020-09-08 18:29 ` [RFC 0/5] " David Hildenbrand
2020-09-09 10:54   ` Vlastimil Babka
2020-09-09 11:27     ` osalvador
2020-09-09 11:29       ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200907163628.26495-2-vbabka@suse.cz \
    --to=vbabka@suse.cz \
    --cc=david@redhat.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=osalvador@suse.de \
    --cc=pasha.tatashin@soleen.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).