[PATCH 4.9 21/71] dmaengine: pl330: Fix burst length if burst size is smaller than bus width

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ]

Move the burst len fixup after setting the generic value for it. This
finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine:
pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was
overwritten by the generic value.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pl330.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 57b375d0de292..16c08846ea0e1 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2677,6 +2677,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	while (burst != (1 << desc->rqcfg.brst_size))
 		desc->rqcfg.brst_size++;
 
+	desc->rqcfg.brst_len = get_burst_len(desc, len);
 	/*
 	 * If burst size is smaller than bus width then make sure we only
 	 * transfer one at a time to avoid a burst stradling an MFIFO entry.
@@ -2684,7 +2685,6 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
 		desc->rqcfg.brst_len = 1;
 
-	desc->rqcfg.brst_len = get_burst_len(desc, len);
 	desc->bytes_requested = len;
 
 	desc->txd.flags = flags;
-- 
2.25.1