LKML Archive on
 help / color / Atom feed
From: Sibi Sankar <>
Cc:,,,,, Sibi Sankar <>
Subject: [PATCH] soc: qcom: pdr: Fixup array type of get_domain_list_resp message
Date: Mon, 14 Sep 2020 20:28:07 +0530
Message-ID: <> (raw)

The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY.
Due to which the following error was observed when using pdr helpers with
the downstream proprietary pd-mapper. Fix this up by marking it as
VAR_LEN_ARRAY instead.

Err logs:
qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1)
failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14

Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")
Reported-by: Rishabh Bhatnagar <>
Signed-off-by: Sibi Sankar <>
 drivers/soc/qcom/pdr_internal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/pdr_internal.h b/drivers/soc/qcom/pdr_internal.h
index 15b5002e4127b..ab9ae8cdfa54c 100644
--- a/drivers/soc/qcom/pdr_internal.h
+++ b/drivers/soc/qcom/pdr_internal.h
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = {
 		.data_type      = QMI_STRUCT,
 		.elem_len       = SERVREG_DOMAIN_LIST_LENGTH,
 		.elem_size      = sizeof(struct servreg_location_entry),
-		.array_type	= NO_ARRAY,
+		.array_type	= VAR_LEN_ARRAY,
 		.tlv_type       = 0x12,
 		.offset         = offsetof(struct servreg_get_domain_list_resp,
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-14 14:58 Sibi Sankar [this message]
2020-09-14 21:13 ` rishabhb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone