linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Jacopo Mondi <jacopo@jmondi.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Prabhakar <prabhakar.csengg@gmail.com>
Subject: [PATCH v5 1/3] media: i2c: ov772x: Parse endpoint properties
Date: Tue, 15 Sep 2020 18:42:33 +0100	[thread overview]
Message-ID: <20200915174235.1229-2-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20200915174235.1229-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse()
to determine bus-type and store it locally in priv data.

v4l2_fwnode_endpoint_alloc_parse() with bus_type set to
V4L2_MBUS_PARALLEL falls back to V4L2_MBUS_PARALLEL thus handling
backward compatibility with existing DT where bus-type isn't specified.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/media/i2c/ov772x.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 2cc6a678069a..4ab4b3c883d0 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -31,6 +31,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
 #include <media/v4l2-image-sizes.h>
 #include <media/v4l2-subdev.h>
 
@@ -434,6 +435,7 @@ struct ov772x_priv {
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pad;
 #endif
+	enum v4l2_mbus_type		  bus_type;
 };
 
 /*
@@ -1354,6 +1356,8 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = {
 
 static int ov772x_probe(struct i2c_client *client)
 {
+	struct v4l2_fwnode_endpoint bus_cfg;
+	struct fwnode_handle	*ep;
 	struct ov772x_priv	*priv;
 	int			ret;
 	static const struct regmap_config ov772x_regmap_config = {
@@ -1415,6 +1419,27 @@ static int ov772x_probe(struct i2c_client *client)
 		goto error_clk_put;
 	}
 
+	ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
+					    NULL);
+	if (!ep) {
+		dev_err(&client->dev, "endpoint node not found\n");
+		ret = -EINVAL;
+		goto error_clk_put;
+	}
+
+	/* For backward compatibility with the existing DT where
+	 * bus-type isn't specified v4l2_fwnode_endpoint_alloc_parse()
+	 * with bus_type set to V4L2_MBUS_PARALLEL falls back to
+	 * V4L2_MBUS_PARALLEL
+	 */
+	bus_cfg.bus_type = V4L2_MBUS_PARALLEL;
+	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
+	priv->bus_type = bus_cfg.bus_type;
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+	fwnode_handle_put(ep);
+	if (ret)
+		goto error_clk_put;
+
 	ret = ov772x_video_probe(priv);
 	if (ret < 0)
 		goto error_gpio_put;
-- 
2.17.1


  reply	other threads:[~2020-09-15 17:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-15 17:42 [PATCH v5 0/3] media: i2c: ov772x: Enable BT.656 mode and test pattern support Lad Prabhakar
2020-09-15 17:42 ` Lad Prabhakar [this message]
2020-09-16  7:47   ` [PATCH v5 1/3] media: i2c: ov772x: Parse endpoint properties Jacopo Mondi
2020-09-16  8:30     ` Jacopo Mondi
2020-09-15 17:42 ` [PATCH v5 2/3] media: i2c: ov772x: Add support for BT.656 mode Lad Prabhakar
2020-09-16  8:24   ` Jacopo Mondi
2020-09-15 17:42 ` [PATCH v5 3/3] media: i2c: ov772x: Add test pattern control Lad Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200915174235.1229-2-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=jacopo@jmondi.org \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).