LKML Archive on
 help / color / Atom feed
From: Sibi Sankar <>
	Sibi Sankar <>,
Subject: [PATCH v2] remoteproc: Fixup coredump debugfs disable request
Date: Wed, 16 Sep 2020 20:21:00 +0530
Message-ID: <> (raw)

Fix the discrepancy observed between accepted input and read back value
while disabling remoteproc coredump through the coredump debugfs entry.

Fixes: 3afdc59e4390 ("remoteproc: Add coredump debugfs entry")
Signed-off-by: Sibi Sankar <>

 * Fixup commit message [Bjorn].

 drivers/remoteproc/remoteproc_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 2e3b3e22e1d0..7ca823f6aa63 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -94,7 +94,7 @@ static ssize_t rproc_coredump_write(struct file *filp,
 		goto out;
-	if (!strncmp(buf, "disable", count)) {
+	if (!strncmp(buf, "disabled", count)) {
 		rproc->dump_conf = RPROC_COREDUMP_DISABLED;
 	} else if (!strncmp(buf, "inline", count)) {
 		rproc->dump_conf = RPROC_COREDUMP_INLINE;
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone