From: Dan Murphy <dmurphy@ti.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <tiwai@suse.com>,
<robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH 7/9] ASoC: tas2770: Fix error handling with update_bits
Date: Fri, 18 Sep 2020 14:05:46 -0500 [thread overview]
Message-ID: <20200918190548.12598-7-dmurphy@ti.com> (raw)
In-Reply-To: <20200918190548.12598-1-dmurphy@ti.com>
snd_soc_update_bits returns a 1 when the bit was successfully updated,
returns a 0 is no update was needed and a negative if the call failed.
The code is currently failing the case of a successful update by just
checking for a non-zero number. Modify these checks and return the error
code only if there is a negative.
Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
sound/soc/codecs/tas2770.c | 52 ++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index 16979583cd68..3226c6d4493e 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -139,23 +139,18 @@ static int tas2770_dac_event(struct snd_soc_dapm_widget *w,
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_MUTE);
- if (ret)
- goto end;
break;
case SND_SOC_DAPM_PRE_PMD:
ret = snd_soc_component_update_bits(component,
TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
TAS2770_PWR_CTRL_SHUTDOWN);
- if (ret)
- goto end;
break;
default:
dev_err(tas2770->dev, "Not supported evevt\n");
return -EINVAL;
}
-end:
if (ret < 0)
return ret;
@@ -247,6 +242,9 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
return -EINVAL;
}
+ if (ret < 0)
+ return ret;
+
tas2770->channel_size = bitwidth;
ret = snd_soc_component_update_bits(component,
@@ -255,16 +253,15 @@ static int tas2770_set_bitwidth(struct tas2770_priv *tas2770, int bitwidth)
TAS2770_TDM_CFG_REG5_50_MASK,
TAS2770_TDM_CFG_REG5_VSNS_ENABLE |
tas2770->v_sense_slot);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG6,
TAS2770_TDM_CFG_REG6_ISNS_MASK |
TAS2770_TDM_CFG_REG6_50_MASK,
TAS2770_TDM_CFG_REG6_ISNS_ENABLE |
tas2770->i_sense_slot);
-
-end:
if (ret < 0)
return ret;
@@ -282,36 +279,35 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_44_1_48KHZ);
- if (ret)
- goto end;
break;
case 44100:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_44_1_48KHZ);
- if (ret)
- goto end;
break;
case 96000:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -322,8 +318,9 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -334,22 +331,22 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_48KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
TAS2770_TDM_CFG_REG0_31_176_4_192KHZ);
- if (ret)
- goto end;
break;
case 17640:
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_SMP_MASK,
TAS2770_TDM_CFG_REG0_SMP_44_1KHZ);
- if (ret)
- goto end;
+ if (ret < 0)
+ return ret;
+
ret = snd_soc_component_update_bits(component,
TAS2770_TDM_CFG_REG0,
TAS2770_TDM_CFG_REG0_31_MASK,
@@ -359,7 +356,6 @@ static int tas2770_set_samplerate(struct tas2770_priv *tas2770, int samplerate)
ret = -EINVAL;
}
-end:
if (ret < 0)
return ret;
--
2.28.0
next prev parent reply other threads:[~2020-09-18 19:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-18 19:05 [PATCH 1/9] ASoC: tas2770: Fix calling reset in probe Dan Murphy
2020-09-18 19:05 ` [PATCH 2/9] ASoC: tas2770: Add missing bias level power states Dan Murphy
2020-09-18 19:05 ` [PATCH 3/9] dt-bindings: tas2770: Fix I2C addresses for the TAS2770 Dan Murphy
2020-09-18 19:05 ` [PATCH 4/9] ASoC: tas2770: Fix required DT properties in the code Dan Murphy
2020-09-18 19:05 ` [PATCH 5/9] ASoC: tas2770: Fix unbalanced calls to pm_runtime Dan Murphy
2020-09-18 19:05 ` [PATCH 6/9] ASoC: tas2770: Convert bit mask to GENMASK in header Dan Murphy
2020-09-21 19:04 ` Mark Brown
2020-09-21 19:18 ` Dan Murphy
2020-09-21 19:19 ` Dan Murphy
2020-09-22 9:47 ` Mark Brown
2020-09-18 19:05 ` Dan Murphy [this message]
2020-09-18 19:05 ` [PATCH 8/9] ASoC: tas2770: Fix the spacing and new lines Dan Murphy
2020-09-18 19:05 ` [PATCH 9/9] ASoC: tas2770: Refactor sample rate function Dan Murphy
2020-09-22 0:05 ` [PATCH 1/9] ASoC: tas2770: Fix calling reset in probe Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200918190548.12598-7-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).