From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Aleksander Morgado <aleksander@aleksander.es>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.4 26/46] USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
Date: Mon, 21 Sep 2020 18:27:42 +0200 [thread overview]
Message-ID: <20200921162034.517313011@linuxfoundation.org> (raw)
In-Reply-To: <20200921162033.346434578@linuxfoundation.org>
From: Aleksander Morgado <aleksander@aleksander.es>
commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream.
These modules have 2 different USB layouts:
The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and
an ECM interface:
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9205 Rev=00.00
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech SIM7080
S: SerialNumber=1234567890ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
The purpose of each TTY is as follows:
* ttyUSB0: DIAG/QCDM port.
* ttyUSB1: GNSS data.
* ttyUSB2: AT-capable port (control).
* ttyUSB3: AT-capable port (data).
In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module
exposes 6 TTY ports:
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9206 Rev=00.00
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech SIM7080
S: SerialNumber=1234567890ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
The purpose of each TTY is as follows:
* ttyUSB0: DIAG/QCDM port.
* ttyUSB1: GNSS data.
* ttyUSB2: AT-capable port (control).
* ttyUSB3: QFLOG interface.
* ttyUSB4: DAM interface.
* ttyUSB5: AT-capable port (data).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1808,6 +1808,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
.driver_info = RSVD(7) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
next prev parent reply other threads:[~2020-09-21 16:32 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-21 16:27 [PATCH 4.4 00/46] 4.4.237-rc1 review Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 01/46] ARM: dts: socfpga: fix register entry for timer3 on Arria10 Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 02/46] scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 03/46] drivers/net/wan/lapbether: Added needed_tailroom Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 04/46] firestream: Fix memleak in fs_open Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 05/46] drivers/net/wan/lapbether: Set network_header before transmitting Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 06/46] xfs: initialize the shortform attr header padding entry Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 07/46] drivers/net/wan/hdlc_cisco: Add hard_header_len Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 08/46] ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 09/46] gcov: Disable gcov build with GCC 10 Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 10/46] iio: adc: mcp3422: fix locking scope Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 11/46] iio: adc: mcp3422: fix locking on error path Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 12/46] iio:light:ltr501 Fix timestamp alignment issue Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 13/46] iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 14/46] iio:accel:mma8452: " Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 15/46] USB: core: add helpers to retrieve endpoints Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 16/46] staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb() Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 17/46] btrfs: fix wrong address when faulting in pages in the search ioctl Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 18/46] scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 19/46] rbd: require global CAP_SYS_ADMIN for mapping and unmapping Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 20/46] fbcon: remove soft scrollback code Greg Kroah-Hartman
2020-09-28 6:06 ` Ajay Kaher
2020-09-28 12:17 ` Greg KH
2020-09-21 16:27 ` [PATCH 4.4 21/46] fbcon: remove now unusued softback_lines cursor() argument Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 22/46] vgacon: remove software scrollback support Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 23/46] KVM: VMX: Dont freeze guest when event delivery causes an APIC-access exit Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 24/46] video: fbdev: fix OOB read in vga_8planes_imageblit() Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 25/46] USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter Greg Kroah-Hartman
2020-09-21 16:27 ` Greg Kroah-Hartman [this message]
2020-09-21 16:27 ` [PATCH 4.4 27/46] usb: Fix out of sync data toggle if a configured device is reconfigured Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 28/46] gcov: add support for GCC 10.1 Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 29/46] NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 30/46] scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 31/46] scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 32/46] SUNRPC: stop printk reading past end of string Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 33/46] rapidio: Replace select DMAENGINES with depends on Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 34/46] i2c: algo: pca: Reapply i2c bus settings after reset Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 35/46] MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 36/46] perf test: Free formats for perf pmu parse test Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 37/46] fbcon: Fix user font detection test at fbcon_resize() Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 38/46] MIPS: SNI: Fix spurious interrupts Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 39/46] USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 40/46] USB: UAS: fix disconnect by unplugging a hub Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 41/46] usblp: fix race between disconnect() and read() Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 42/46] Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists Greg Kroah-Hartman
2020-09-21 16:27 ` [PATCH 4.4 43/46] serial: 8250_pci: Add Realtek 816a and 816b Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.4 44/46] ehci-hcd: Move include to keep CRC stable Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.4 45/46] powerpc/dma: Fix dma_map_ops::get_required_mask Greg Kroah-Hartman
2020-09-21 16:28 ` [PATCH 4.4 46/46] x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y Greg Kroah-Hartman
2020-09-22 9:54 ` [PATCH 4.4 00/46] 4.4.237-rc1 review Nobuhiro Iwamatsu
2020-09-24 17:07 ` Greg Kroah-Hartman
2020-09-22 12:30 ` Naresh Kamboju
2020-09-22 20:17 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200921162034.517313011@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=aleksander@aleksander.es \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).