linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org (open list),
	vladimir.oltean@nxp.com, olteanv@gmail.com, nikolay@nvidia.com
Subject: [PATCH net-next 2/2] net: dsa: b53: Configure VLANs while not filtering
Date: Tue, 22 Sep 2020 20:11:55 -0700	[thread overview]
Message-ID: <20200923031155.2832348-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20200923031155.2832348-1-f.fainelli@gmail.com>

Update the B53 driver to support VLANs while not filtering. This
requires us to enable VLAN globally within the switch upon driver
initial configuration (dev->vlan_enabled).

We also need to remove the code that dealt with PVID re-configuration in
b53_vlan_filtering() since that function worked under the assumption
that it would only be called to make a bridge VLAN filtering, or not
filtering, and we would attempt to move the port's PVID accordingly.

Now that VLANs are programmed all the time, even in the case of a
non-VLAN filtering bridge, we would be programming a default_pvid for
the bridged switch ports.

We need the DSA receive path to pop the VLAN tag if it is the bridge's
default_pvid because the CPU port is always programmed tagged in the
programmed VLANs. In order to do so we utilize the
dsa_untag_bridge_pvid() helper introduced in the commit before by
setting ds->untag_bridge_pvid to true.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 20 +++-----------------
 drivers/net/dsa/b53/b53_priv.h   |  1 -
 2 files changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 6a5796c32721..ce18ba0b74eb 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1377,23 +1377,6 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up);
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
 {
 	struct b53_device *dev = ds->priv;
-	u16 pvid, new_pvid;
-
-	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
-	if (!vlan_filtering) {
-		/* Filtering is currently enabled, use the default PVID since
-		 * the bridge does not expect tagging anymore
-		 */
-		dev->ports[port].pvid = pvid;
-		new_pvid = b53_default_pvid(dev);
-	} else {
-		/* Filtering is currently disabled, restore the previous PVID */
-		new_pvid = dev->ports[port].pvid;
-	}
-
-	if (pvid != new_pvid)
-		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
-			    new_pvid);
 
 	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
 
@@ -2619,6 +2602,9 @@ struct b53_device *b53_switch_alloc(struct device *base,
 	dev->priv = priv;
 	dev->ops = ops;
 	ds->ops = &b53_switch_ops;
+	ds->configure_vlan_while_not_filtering = true;
+	ds->untag_bridge_pvid = true;
+	dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
 	mutex_init(&dev->reg_mutex);
 	mutex_init(&dev->stats_mutex);
 
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index c55c0a9f1b47..24893b592216 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -91,7 +91,6 @@ enum {
 struct b53_port {
 	u16		vlan_ctl_mask;
 	struct ethtool_eee eee;
-	u16		pvid;
 };
 
 struct b53_vlan {
-- 
2.25.1


      parent reply	other threads:[~2020-09-23  3:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-23  3:11 [PATCH net-next 0/2] net: dsa: b53: Configure VLANs while not filtering Florian Fainelli
2020-09-23  3:11 ` [PATCH net-next 1/2] net: dsa: untag the bridge pvid from rx skbs Florian Fainelli
2020-09-23  8:14   ` Vladimir Oltean
2020-09-23 17:06     ` Florian Fainelli
2020-09-23  3:11 ` Florian Fainelli [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200923031155.2832348-3-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikolay@nvidia.com \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).