From: Satya Tangirala <satyat@google.com>
To: Mike Snitzer <snitzer@redhat.com>
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
dm-devel@redhat.com, Jens Axboe <axboe@kernel.dk>,
Alasdair Kergon <agk@redhat.com>,
Eric Biggers <ebiggers@google.com>
Subject: Re: [PATCH 2/3] dm: add support for passing through inline crypto support
Date: Thu, 24 Sep 2020 07:48:10 +0000 [thread overview]
Message-ID: <20200924074810.GB1894729@google.com> (raw)
In-Reply-To: <20200924012103.GE10500@redhat.com>
On Wed, Sep 23, 2020 at 09:21:03PM -0400, Mike Snitzer wrote:
> On Wed, Sep 09 2020 at 7:44pm -0400,
> Satya Tangirala <satyat@google.com> wrote:
>
> > From: Eric Biggers <ebiggers@google.com>
> >
> > Update the device-mapper core to support exposing the inline crypto
> > support of the underlying device(s) through the device-mapper device.
> >
> > This works by creating a "passthrough keyslot manager" for the dm
> > device, which declares support for encryption settings which all
> > underlying devices support. When a supported setting is used, the bio
> > cloning code handles cloning the crypto context to the bios for all the
> > underlying devices. When an unsupported setting is used, the blk-crypto
> > fallback is used as usual.
> >
> > Crypto support on each underlying device is ignored unless the
> > corresponding dm target opts into exposing it. This is needed because
> > for inline crypto to semantically operate on the original bio, the data
> > must not be transformed by the dm target. Thus, targets like dm-linear
> > can expose crypto support of the underlying device, but targets like
> > dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
> >
> > When a key is evicted from the dm device, it is evicted from all
> > underlying devices.
> >
> > Signed-off-by: Eric Biggers <ebiggers@google.com>
> > Co-developed-by: Satya Tangirala <satyat@google.com>
> > Signed-off-by: Satya Tangirala <satyat@google.com>
> > ---
> > block/blk-crypto.c | 1 +
> > block/keyslot-manager.c | 34 ++++++++++++
> > drivers/md/dm-core.h | 4 ++
> > drivers/md/dm-table.c | 52 +++++++++++++++++++
> > drivers/md/dm.c | 92 ++++++++++++++++++++++++++++++++-
> > include/linux/device-mapper.h | 6 +++
> > include/linux/keyslot-manager.h | 7 +++
> > 7 files changed, 195 insertions(+), 1 deletion(-)
> >
> > diff --git a/block/blk-crypto.c b/block/blk-crypto.c
> > index 2d5e60023b08..33555cf0e3e7 100644
> > --- a/block/blk-crypto.c
> > +++ b/block/blk-crypto.c
> > @@ -402,3 +402,4 @@ int blk_crypto_evict_key(struct request_queue *q,
> > */
> > return blk_crypto_fallback_evict_key(key);
> > }
> > +EXPORT_SYMBOL_GPL(blk_crypto_evict_key);
> > diff --git a/block/keyslot-manager.c b/block/keyslot-manager.c
> > index 60ac406d54b9..e0f776c38d8a 100644
> > --- a/block/keyslot-manager.c
> > +++ b/block/keyslot-manager.c
> > @@ -416,6 +416,40 @@ void blk_ksm_unregister(struct request_queue *q)
> > {
> > q->ksm = NULL;
> > }
> > +EXPORT_SYMBOL_GPL(blk_ksm_unregister);
> > +
> > +/**
> > + * blk_ksm_intersect_modes() - restrict supported modes by child device
> > + * @parent: The keyslot manager for parent device
> > + * @child: The keyslot manager for child device, or NULL
> > + *
> > + * Clear any crypto mode support bits in @parent that aren't set in @child.
> > + * If @child is NULL, then all parent bits are cleared.
> > + *
> > + * Only use this when setting up the keyslot manager for a layered device,
> > + * before it's been exposed yet.
> > + */
> > +void blk_ksm_intersect_modes(struct blk_keyslot_manager *parent,
> > + const struct blk_keyslot_manager *child)
> > +{
> > + if (child) {
> > + unsigned int i;
> > +
> > + parent->max_dun_bytes_supported =
> > + min(parent->max_dun_bytes_supported,
> > + child->max_dun_bytes_supported);
> > + for (i = 0; i < ARRAY_SIZE(child->crypto_modes_supported);
> > + i++) {
> > + parent->crypto_modes_supported[i] &=
> > + child->crypto_modes_supported[i];
> > + }
> > + } else {
> > + parent->max_dun_bytes_supported = 0;
> > + memset(parent->crypto_modes_supported, 0,
> > + sizeof(parent->crypto_modes_supported));
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(blk_ksm_intersect_modes);
> >
> > /**
> > * blk_ksm_init_passthrough() - Init a passthrough keyslot manager
> > diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h
> > index c4ef1fceead6..4542050eebfc 100644
> > --- a/drivers/md/dm-core.h
> > +++ b/drivers/md/dm-core.h
> > @@ -12,6 +12,7 @@
> > #include <linux/kthread.h>
> > #include <linux/ktime.h>
> > #include <linux/blk-mq.h>
> > +#include <linux/keyslot-manager.h>
> >
> > #include <trace/events/block.h>
> >
> > @@ -49,6 +50,9 @@ struct mapped_device {
> >
> > int numa_node_id;
> > struct request_queue *queue;
> > +#ifdef CONFIG_BLK_INLINE_ENCRYPTION
> > + struct blk_keyslot_manager ksm;
> > +#endif
> >
> > atomic_t holders;
> > atomic_t open_count;
>
> Any reason you placed the ksm member where you did?
As in, any reason why it's placed right after the struct request_queue
*queue? The ksm is going to be set up in the request_queue and is a part
of the request_queue is some sense, so it seemed reasonable to me to
group them together....but I don't think there's any reason it *has* to
be there, if you think it should be put elsewhere (or maybe I'm
misunderstanding your question :) ).
>
> Looking at 'struct blk_keyslot_manager' I'm really hating adding that
> bloat to every DM device for a feature that really won't see much broad
> use (AFAIK).
>
> Any chance you could allocate 'struct blk_keyslot_manager' as needed so
> that most users of DM would only be carrying 1 extra pointer (set to
> NULL)?
>
> Thanks,
> Mike
>
next prev parent reply other threads:[~2020-09-24 7:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-09 23:44 [PATCH 0/3] add support for inline encryption to device mapper Satya Tangirala
2020-09-09 23:44 ` [PATCH 1/3] block: keyslot-manager: Introduce passthrough keyslot manager Satya Tangirala
2020-09-22 0:27 ` Eric Biggers
2020-09-09 23:44 ` [PATCH 2/3] dm: add support for passing through inline crypto support Satya Tangirala
2020-09-22 0:32 ` Eric Biggers
2020-09-24 1:14 ` Mike Snitzer
2020-09-24 7:17 ` Satya Tangirala
2020-09-24 13:46 ` Mike Snitzer
2020-09-24 15:45 ` Eric Biggers
2020-09-24 16:16 ` Mike Snitzer
2020-09-24 16:57 ` Eric Biggers
2020-09-24 1:21 ` Mike Snitzer
2020-09-24 7:38 ` Satya Tangirala
2020-09-24 14:23 ` Mike Snitzer
2020-10-15 22:05 ` Satya Tangirala
2020-09-24 7:48 ` Satya Tangirala [this message]
2020-09-24 13:40 ` Mike Snitzer
2020-10-15 21:55 ` Satya Tangirala
2020-09-09 23:44 ` [PATCH 3/3] dm: enable may_passthrough_inline_crypto on some targets Satya Tangirala
2020-09-22 0:49 ` Eric Biggers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200924074810.GB1894729@google.com \
--to=satyat@google.com \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=dm-devel@redhat.com \
--cc=ebiggers@google.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=snitzer@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).