From: Marek Szyprowski <m.szyprowski@samsung.com>
To: dri-devel@lists.freedesktop.org, linux-samsung-soc@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Andrzej Hajda <a.hajda@samsung.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@siol.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH] drm/bridge: tc358764: restore connector support
Date: Thu, 24 Sep 2020 10:31:45 +0200 [thread overview]
Message-ID: <20200924083145.23312-1-m.szyprowski@samsung.com> (raw)
In-Reply-To: CGME20200924083156eucas1p14406128445a655393013effe719f2228@eucas1p1.samsung.com
This patch restores DRM connector registration in the TC358764 bridge
driver and restores usage of the old drm_panel_* API, thus allows dynamic
panel registration. This fixes panel operation on Exynos5250-based
Arndale board.
This is equivalent to the revert of the following commits:
1644127f83bc "drm/bridge: tc358764: add drm_panel_bridge support"
385ca38da29c "drm/bridge: tc358764: drop drm_connector_(un)register"
and removal of the calls to drm_panel_attach()/drm_panel_detach(), which
were no-ops and has been removed in meanwhile.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
As I've reported and Andrzej Hajda pointed, the reverted patches break
operation of the panel on the Arndale board. Noone suggested how to fix
the regression, I've decided to send a revert until a new solution is
found.
The issues with tc358764 might be automatically resolved once the Exynos
DSI itself is converted to DRM bridge:
https://patchwork.kernel.org/cover/11770683/
but that approach has also its own issues so far.
Best regards,
Marek Szyprowski
---
drivers/gpu/drm/bridge/tc358764.c | 107 +++++++++++++++++++++++++-----
1 file changed, 92 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358764.c b/drivers/gpu/drm/bridge/tc358764.c
index d89394bc5aa4..c1e35bdf9232 100644
--- a/drivers/gpu/drm/bridge/tc358764.c
+++ b/drivers/gpu/drm/bridge/tc358764.c
@@ -153,9 +153,10 @@ static const char * const tc358764_supplies[] = {
struct tc358764 {
struct device *dev;
struct drm_bridge bridge;
+ struct drm_connector connector;
struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)];
struct gpio_desc *gpio_reset;
- struct drm_bridge *panel_bridge;
+ struct drm_panel *panel;
int error;
};
@@ -209,6 +210,12 @@ static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge)
return container_of(bridge, struct tc358764, bridge);
}
+static inline
+struct tc358764 *connector_to_tc358764(struct drm_connector *connector)
+{
+ return container_of(connector, struct tc358764, connector);
+}
+
static int tc358764_init(struct tc358764 *ctx)
{
u32 v = 0;
@@ -271,11 +278,43 @@ static void tc358764_reset(struct tc358764 *ctx)
usleep_range(1000, 2000);
}
+static int tc358764_get_modes(struct drm_connector *connector)
+{
+ struct tc358764 *ctx = connector_to_tc358764(connector);
+
+ return drm_panel_get_modes(ctx->panel, connector);
+}
+
+static const
+struct drm_connector_helper_funcs tc358764_connector_helper_funcs = {
+ .get_modes = tc358764_get_modes,
+};
+
+static const struct drm_connector_funcs tc358764_connector_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static void tc358764_disable(struct drm_bridge *bridge)
+{
+ struct tc358764 *ctx = bridge_to_tc358764(bridge);
+ int ret = drm_panel_disable(bridge_to_tc358764(bridge)->panel);
+
+ if (ret < 0)
+ dev_err(ctx->dev, "error disabling panel (%d)\n", ret);
+}
+
static void tc358764_post_disable(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
int ret;
+ ret = drm_panel_unprepare(ctx->panel);
+ if (ret < 0)
+ dev_err(ctx->dev, "error unpreparing panel (%d)\n", ret);
tc358764_reset(ctx);
usleep_range(10000, 15000);
ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
@@ -296,28 +335,71 @@ static void tc358764_pre_enable(struct drm_bridge *bridge)
ret = tc358764_init(ctx);
if (ret < 0)
dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
+ ret = drm_panel_prepare(ctx->panel);
+ if (ret < 0)
+ dev_err(ctx->dev, "error preparing panel (%d)\n", ret);
+}
+
+static void tc358764_enable(struct drm_bridge *bridge)
+{
+ struct tc358764 *ctx = bridge_to_tc358764(bridge);
+ int ret = drm_panel_enable(ctx->panel);
+
+ if (ret < 0)
+ dev_err(ctx->dev, "error enabling panel (%d)\n", ret);
}
static int tc358764_attach(struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags)
+{
+ struct tc358764 *ctx = bridge_to_tc358764(bridge);
+ struct drm_device *drm = bridge->dev;
+ int ret;
+
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
+ ctx->connector.polled = DRM_CONNECTOR_POLL_HPD;
+ ret = drm_connector_init(drm, &ctx->connector,
+ &tc358764_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector\n");
+ return ret;
+ }
+
+ drm_connector_helper_add(&ctx->connector,
+ &tc358764_connector_helper_funcs);
+ drm_connector_attach_encoder(&ctx->connector, bridge->encoder);
+ ctx->connector.funcs->reset(&ctx->connector);
+ drm_connector_register(&ctx->connector);
+
+ return 0;
+}
+
+static void tc358764_detach(struct drm_bridge *bridge)
{
struct tc358764 *ctx = bridge_to_tc358764(bridge);
- return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
- bridge, flags);
+ drm_connector_unregister(&ctx->connector);
+ ctx->panel = NULL;
+ drm_connector_put(&ctx->connector);
}
static const struct drm_bridge_funcs tc358764_bridge_funcs = {
+ .disable = tc358764_disable,
.post_disable = tc358764_post_disable,
+ .enable = tc358764_enable,
.pre_enable = tc358764_pre_enable,
.attach = tc358764_attach,
+ .detach = tc358764_detach,
};
static int tc358764_parse_dt(struct tc358764 *ctx)
{
- struct drm_bridge *panel_bridge;
struct device *dev = ctx->dev;
- struct drm_panel *panel;
int ret;
ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
@@ -326,16 +408,12 @@ static int tc358764_parse_dt(struct tc358764 *ctx)
return PTR_ERR(ctx->gpio_reset);
}
- ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
- if (ret)
- return ret;
-
- panel_bridge = devm_drm_panel_bridge_add(dev, panel);
- if (IS_ERR(panel_bridge))
- return PTR_ERR(panel_bridge);
+ ret = drm_of_find_panel_or_bridge(ctx->dev->of_node, 1, 0, &ctx->panel,
+ NULL);
+ if (ret && ret != -EPROBE_DEFER)
+ dev_err(dev, "cannot find panel (%d)\n", ret);
- ctx->panel_bridge = panel_bridge;
- return 0;
+ return ret;
}
static int tc358764_configure_regulators(struct tc358764 *ctx)
@@ -381,7 +459,6 @@ static int tc358764_probe(struct mipi_dsi_device *dsi)
return ret;
ctx->bridge.funcs = &tc358764_bridge_funcs;
- ctx->bridge.type = DRM_MODE_CONNECTOR_LVDS;
ctx->bridge.of_node = dev->of_node;
drm_bridge_add(&ctx->bridge);
--
2.17.1
next parent reply other threads:[~2020-09-24 8:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200924083156eucas1p14406128445a655393013effe719f2228@eucas1p1.samsung.com>
2020-09-24 8:31 ` Marek Szyprowski [this message]
2020-09-30 10:13 ` [PATCH] drm/bridge: tc358764: restore connector support Andrzej Hajda
2020-09-30 10:31 ` Daniel Vetter
2020-09-30 10:52 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200924083145.23312-1-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).