linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Geert Uytterhoeven <geert@linux-m68k.org>,
	Masahiro Yamada <masahiroy@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>
Subject: [PATCH 4.19 28/37] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
Date: Fri, 25 Sep 2020 14:48:56 +0200	[thread overview]
Message-ID: <20200925124725.211971609@linuxfoundation.org> (raw)
In-Reply-To: <20200925124720.972208530@linuxfoundation.org>

From: Masahiro Yamada <masahiroy@kernel.org>

commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d upstream.

As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.

wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.

I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.

Instead, the kernel.org m68k GCC [1] successfully built it.

Allowing a user to pass in CROSS_COMPILE_M68K= is handier.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/Kconfig  |    2 +-
 drivers/net/wan/Makefile |   12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -199,7 +199,7 @@ config WANXL_BUILD_FIRMWARE
 	depends on WANXL && !PREVENT_FIRMWARE_BUILD
 	help
 	  Allows you to rebuild firmware run by the QUICC processor.
-	  It requires as68k, ld68k and hexdump programs.
+	  It requires m68k toolchains and hexdump programs.
 
 	  You should never need this option, say N.
 
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -41,17 +41,17 @@ $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
 
 ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
 ifeq ($(ARCH),m68k)
-  AS68K = $(AS)
-  LD68K = $(LD)
+  M68KAS = $(AS)
+  M68KLD = $(LD)
 else
-  AS68K = as68k
-  LD68K = ld68k
+  M68KAS = $(CROSS_COMPILE_M68K)as
+  M68KLD = $(CROSS_COMPILE_M68K)ld
 endif
 
 quiet_cmd_build_wanxlfw = BLD FW  $@
       cmd_build_wanxlfw = \
-	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
-	$(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+	$(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
 	hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x  ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
 	rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
 



  parent reply	other threads:[~2020-09-25 12:54 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-25 12:48 [PATCH 4.19 00/37] 4.19.148-rc1 review Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 01/37] af_key: pfkey_dump needs parameter validation Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 02/37] KVM: fix memory leak in kvm_io_bus_unregister_dev() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 03/37] kprobes: fix kill kprobe which has been marked as gone Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 04/37] mm/thp: fix __split_huge_pmd_locked() for migration PMD Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 05/37] cxgb4: Fix offset when clearing filter byte counters Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 06/37] geneve: add transport ports in route lookup for geneve Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 07/37] hdlc_ppp: add range checks in ppp_cp_parse_cr() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 08/37] ip: fix tos reflection in ack and reset packets Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 09/37] ipv6: avoid lockdep issue in fib6_del() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 10/37] net: DCB: Validate DCB_ATTR_DCB_BUFFER argument Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 11/37] net: dsa: rtl8366: Properly clear member config Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 12/37] net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 13/37] net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 14/37] nfp: use correct define to return NONE fec Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 15/37] tipc: Fix memory leak in tipc_group_create_member() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 16/37] tipc: fix shutdown() of connection oriented socket Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 17/37] tipc: use skb_unshare() instead in tipc_buf_append() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 18/37] bnxt_en: return proper error codes in bnxt_show_temp Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 19/37] bnxt_en: Protect bnxt_set_eee() and bnxt_set_pauseparam() with mutex Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 20/37] net: phy: Avoid NPD upon phy_detach() when driver is unbound Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 21/37] net: qrtr: check skb_put_padto() return value Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 22/37] net: add __must_check to skb_put_padto() Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 23/37] ipv4: Update exception handling for multipath routes via same device Greg Kroah-Hartman
2020-09-25 16:51   ` Pavel Machek
2020-09-26 15:46     ` Greg Kroah-Hartman
2020-09-29 12:26       ` Pavel Machek
2020-09-25 12:48 ` [PATCH 4.19 24/37] MAINTAINERS: add CLANG/LLVM BUILD SUPPORT info Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 25/37] kbuild: add OBJSIZE variable for the size tool Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 26/37] Documentation/llvm: add documentation on building w/ Clang/LLVM Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 27/37] Documentation/llvm: fix the name of llvm-size Greg Kroah-Hartman
2020-09-25 12:48 ` Greg Kroah-Hartman [this message]
2020-09-25 12:48 ` [PATCH 4.19 29/37] net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 30/37] x86/boot: kbuild: allow readelf executable to be specified Greg Kroah-Hartman
2020-09-25 12:48 ` [PATCH 4.19 31/37] kbuild: remove AS variable Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 32/37] kbuild: replace AS=clang with LLVM_IAS=1 Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 33/37] kbuild: support LLVM=1 to switch the default tools to Clang/LLVM Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 34/37] mm: memcg: fix memcg reclaim soft lockup Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 35/37] tcp_bbr: refactor bbr_target_cwnd() for general inflight provisioning Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 36/37] tcp_bbr: adapt cwnd based on ack aggregation estimation Greg Kroah-Hartman
2020-09-25 12:49 ` [PATCH 4.19 37/37] serial: 8250: Avoid error message on reprobe Greg Kroah-Hartman
2020-09-25 17:39 ` [PATCH 4.19 00/37] 4.19.148-rc1 review Pavel Machek
2020-09-26 15:50   ` Greg Kroah-Hartman
2020-09-25 20:02 ` Shuah Khan
2020-09-26 12:35 ` Naresh Kamboju
2020-09-26 15:42 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200925124725.211971609@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=geert@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).