[PATCH AUTOSEL 4.9 01/90] scsi: aacraid: fix illegal IO beyond last LBA

[PATCH AUTOSEL 4.9 01/90] scsi: aacraid: fix illegal IO beyond last LBA

[Sasha Levin]

From: Balsundar P <balsundar.p@microsemi.com>

[ Upstream commit c86fbe484c10b2cd1e770770db2d6b2c88801c1d ]

The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic

Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aacraid/aachba.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 065f11a1964d4..39deea8601d68 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1929,13 +1929,13 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
@@ -2023,13 +2023,13 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
-- 
2.25.1

[PATCH AUTOSEL 4.9 02/90] m68k: q40: Fix info-leak in rtc_ioctl

[Sasha Levin]

From: Fuqian Huang <huangfq.daxian@gmail.com>

[ Upstream commit 7cf78b6b12fd5550545e4b73b35dca18bd46b44c ]

When the option is RTC_PLL_GET, pll will be copied to userland
via copy_to_user. pll is initialized using mach_get_rtc_pll indirect
call and mach_get_rtc_pll is only assigned with function
q40_get_rtc_pll in arch/m68k/q40/config.c.
In function q40_get_rtc_pll, the field pll_ctrl is not initialized.
This will leak uninitialized stack content to userland.
Fix this by zeroing the uninitialized field.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/q40/config.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index ea89a24f46000..cc0f924bbdd2d 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -303,6 +303,7 @@ static int q40_get_rtc_pll(struct rtc_pll_info *pll)
 {
 	int tmp = Q40_RTC_CTRL;
 
+	pll->pll_ctrl = 0;
 	pll->pll_value = tmp & Q40_RTC_PLL_MASK;
 	if (tmp & Q40_RTC_PLL_SIGN)
 		pll->pll_value = -pll->pll_value;
-- 
2.25.1

[PATCH AUTOSEL 4.9 03/90] gma/gma500: fix a memory disclosure bug due to uninitialized bytes

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit 57a25a5f754ce27da2cfa6f413cfd366f878db76 ]

`best_clock` is an object that may be sent out. Object `clock`
contains uninitialized bytes that are copied to `best_clock`,
which leads to memory disclosure and information leak.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/gma500/cdv_intel_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index 17db4b4749d5a..2e8479744ca4a 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -415,6 +415,8 @@ static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
 	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 	struct gma_clock_t clock;
 
+	memset(&clock, 0, sizeof(clock));
+
 	switch (refclk) {
 	case 27000:
 		if (target < 200000) {
-- 
2.25.1

[PATCH AUTOSEL 4.9 04/90] ASoC: kirkwood: fix IRQ error handling

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 175fc928198236037174e5c5c066fe3c4691903e ]

Propagate the error code from request_irq(), rather than returning
-EBUSY.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNIqh-0000tW-EZ@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/kirkwood/kirkwood-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index dafd22e874e99..e655425e4819e 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -136,7 +136,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
 		err = request_irq(priv->irq, kirkwood_dma_irq, IRQF_SHARED,
 				  "kirkwood-i2s", priv);
 		if (err)
-			return -EBUSY;
+			return err;
 
 		/*
 		 * Enable Error interrupts. We're only ack'ing them but
-- 
2.25.1

[PATCH AUTOSEL 4.9 05/90] ata: sata_mv, avoid trigerrable BUG_ON

[Sasha Levin]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit e9f691d899188679746eeb96e6cb520459eda9b4 ]

There are several reports that the BUG_ON on unsupported command in
mv_qc_prep can be triggered under some circumstances:
https://bugzilla.suse.com/show_bug.cgi?id=1110252
https://serverfault.com/questions/888897/raid-problems-after-power-outage
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185
https://bugs.centos.org/view.php?id=14998

Let sata_mv handle the failure gracefully: warn about that incl. the
failed command number and return an AC_ERR_INVALID error. We can do that
now thanks to the previous patch.

Remove also the long-standing FIXME.

[v2] use %.2x as commands are defined as hexa.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-ide@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_mv.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2f32782cea6d9..2ec37a038eda8 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2111,12 +2111,10 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 		 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
 		 * of which are defined/used by Linux.  If we get here, this
 		 * driver needs work.
-		 *
-		 * FIXME: modify libata to give qc_prep a return value and
-		 * return error here.
 		 */
-		BUG_ON(tf->command);
-		break;
+		ata_port_err(ap, "%s: unsupported command: %.2x\n", __func__,
+				tf->command);
+		return AC_ERR_INVALID;
 	}
 	mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
 	mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
-- 
2.25.1

[PATCH AUTOSEL 4.9 06/90] PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 53b4b2aeee26f42cde5ff2a16dd0d8590c51a55a ]

There is another kHz-conversion bug in the code, resulting in integer
overflow. Although, this time the resulting value is 4294966296 and it's
close to ULONG_MAX, which is okay in this case.

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/devfreq/tegra-devfreq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
index fe9dce0245bf0..a20267d93f8a4 100644
--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra-devfreq.c
@@ -79,6 +79,8 @@
 
 #define KHZ							1000
 
+#define KHZ_MAX						(ULONG_MAX / KHZ)
+
 /* Assume that the bus is saturated if the utilization is 25% */
 #define BUS_SATURATION_RATIO					25
 
@@ -179,7 +181,7 @@ struct tegra_actmon_emc_ratio {
 };
 
 static struct tegra_actmon_emc_ratio actmon_emc_ratios[] = {
-	{ 1400000, ULONG_MAX },
+	{ 1400000,    KHZ_MAX },
 	{ 1200000,    750000 },
 	{ 1100000,    600000 },
 	{ 1000000,    500000 },
-- 
2.25.1

[PATCH AUTOSEL 4.9 07/90] clk/ti/adpll: allocate room for terminating null

[Sasha Levin]

From: Stephen Kitt <steve@sk2.org>

[ Upstream commit 7f6ac72946b88b89ee44c1c527aa8591ac5ffcbe ]

The buffer allocated in ti_adpll_clk_get_name doesn't account for the
terminating null. This patch switches to devm_kasprintf to avoid
overflowing.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lkml.kernel.org/r/20191019140634.15596-1-steve@sk2.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/adpll.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/ti/adpll.c b/drivers/clk/ti/adpll.c
index 255cafb18336a..9345eaf00938e 100644
--- a/drivers/clk/ti/adpll.c
+++ b/drivers/clk/ti/adpll.c
@@ -193,15 +193,8 @@ static const char *ti_adpll_clk_get_name(struct ti_adpll_data *d,
 		if (err)
 			return NULL;
 	} else {
-		const char *base_name = "adpll";
-		char *buf;
-
-		buf = devm_kzalloc(d->dev, 8 + 1 + strlen(base_name) + 1 +
-				    strlen(postfix), GFP_KERNEL);
-		if (!buf)
-			return NULL;
-		sprintf(buf, "%08lx.%s.%s", d->pa, base_name, postfix);
-		name = buf;
+		name = devm_kasprintf(d->dev, GFP_KERNEL, "%08lx.adpll.%s",
+				      d->pa, postfix);
 	}
 
 	return name;
-- 
2.25.1

[PATCH AUTOSEL 4.9 08/90] mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()

[Sasha Levin]

From: Hou Tao <houtao1@huawei.com>

[ Upstream commit 03976af89e3bd9489d542582a325892e6a8cacc0 ]

Else there may be a double-free problem, because cfi->cfiq will
be freed by mtd_do_chip_probe() if both the two invocations of
check_cmd_set() return failure.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/chips/cfi_cmdset_0002.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 00ba09fa6f16d..3c4819a05bf03 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -722,7 +722,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	kfree(mtd->eraseregions);
 	kfree(mtd);
 	kfree(cfi->cmdset_priv);
-	kfree(cfi->cfiq);
 	return NULL;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 09/90] mfd: mfd-core: Protect against NULL call-back function pointer

[Sasha Levin]

From: Lee Jones <lee.jones@linaro.org>

[ Upstream commit b195e101580db390f50b0d587b7f66f241d2bc88 ]

If a child device calls mfd_cell_{en,dis}able() without an appropriate
call-back being set, we are likely to encounter a panic.  Avoid this
by adding suitable checking.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mfd-core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 5c8ed2150c8bf..fb687368ac98c 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -32,6 +32,11 @@ int mfd_cell_enable(struct platform_device *pdev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int err = 0;
 
+	if (!cell->enable) {
+		dev_dbg(&pdev->dev, "No .enable() call-back registered\n");
+		return 0;
+	}
+
 	/* only call enable hook if the cell wasn't previously enabled */
 	if (atomic_inc_return(cell->usage_count) == 1)
 		err = cell->enable(pdev);
@@ -49,6 +54,11 @@ int mfd_cell_disable(struct platform_device *pdev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int err = 0;
 
+	if (!cell->disable) {
+		dev_dbg(&pdev->dev, "No .disable() call-back registered\n");
+		return 0;
+	}
+
 	/* only disable if no other clients are using it */
 	if (atomic_dec_return(cell->usage_count) == 0)
 		err = cell->disable(pdev);
-- 
2.25.1

[PATCH AUTOSEL 4.9 10/90] tracing: Adding NULL checks for trace_array descriptor pointer

[Sasha Levin]

From: Divya Indi <divya.indi@oracle.com>

[ Upstream commit 953ae45a0c25e09428d4a03d7654f97ab8a36647 ]

As part of commit f45d1225adb0 ("tracing: Kernel access to Ftrace
instances") we exported certain functions. Here, we are adding some additional
NULL checks to ensure safe usage by users of these APIs.

Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com

Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c        | 3 +++
 kernel/trace/trace_events.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index b2fb25aefb2fc..67cee2774a6b8 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2600,6 +2600,9 @@ int trace_array_printk(struct trace_array *tr,
 	if (!(global_trace.trace_flags & TRACE_ITER_PRINTK))
 		return 0;
 
+	if (!tr)
+		return -ENOENT;
+
 	va_start(ap, fmt);
 	ret = trace_array_vprintk(tr, ip, fmt, ap);
 	va_end(ap);
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index af969f753e5e9..5bf072e437c41 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -790,6 +790,8 @@ static int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set)
 	char *event = NULL, *sub = NULL, *match;
 	int ret;
 
+	if (!tr)
+		return -ENOENT;
 	/*
 	 * The buf format can be <subsystem>:<event-name>
 	 *  *:<event-name> means any event by that name.
-- 
2.25.1

[PATCH AUTOSEL 4.9 11/90] bcache: fix a lost wake-up problem caused by mca_cannibalize_lock

[Sasha Levin]

From: Guoju Fang <fangguoju@gmail.com>

[ Upstream commit 34cf78bf34d48dddddfeeadb44f9841d7864997a ]

This patch fix a lost wake-up problem caused by the race between
mca_cannibalize_lock and bch_cannibalize_unlock.

Consider two processes, A and B. Process A is executing
mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock
and is executing bch_cannibalize_unlock. The problem happens that after
process A executes cmpxchg and will execute prepare_to_wait. In this
timeslice process B executes wake_up, but after that process A executes
prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A
goes to sleep but no one will wake up it. This problem may cause bcache
device to dead.

Signed-off-by: Guoju Fang <fangguoju@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/bcache.h |  1 +
 drivers/md/bcache/btree.c  | 12 ++++++++----
 drivers/md/bcache/super.c  |  1 +
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 7fe7df56fa334..f0939fc1cfe55 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -547,6 +547,7 @@ struct cache_set {
 	 */
 	wait_queue_head_t	btree_cache_wait;
 	struct task_struct	*btree_cache_alloc_lock;
+	spinlock_t		btree_cannibalize_lock;
 
 	/*
 	 * When we free a btree node, we increment the gen of the bucket the
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 764d519a7f1c6..26e56a9952d09 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -836,15 +836,17 @@ out:
 
 static int mca_cannibalize_lock(struct cache_set *c, struct btree_op *op)
 {
-	struct task_struct *old;
-
-	old = cmpxchg(&c->btree_cache_alloc_lock, NULL, current);
-	if (old && old != current) {
+	spin_lock(&c->btree_cannibalize_lock);
+	if (likely(c->btree_cache_alloc_lock == NULL)) {
+		c->btree_cache_alloc_lock = current;
+	} else if (c->btree_cache_alloc_lock != current) {
 		if (op)
 			prepare_to_wait(&c->btree_cache_wait, &op->wait,
 					TASK_UNINTERRUPTIBLE);
+		spin_unlock(&c->btree_cannibalize_lock);
 		return -EINTR;
 	}
+	spin_unlock(&c->btree_cannibalize_lock);
 
 	return 0;
 }
@@ -879,10 +881,12 @@ static struct btree *mca_cannibalize(struct cache_set *c, struct btree_op *op,
  */
 static void bch_cannibalize_unlock(struct cache_set *c)
 {
+	spin_lock(&c->btree_cannibalize_lock);
 	if (c->btree_cache_alloc_lock == current) {
 		c->btree_cache_alloc_lock = NULL;
 		wake_up(&c->btree_cache_wait);
 	}
+	spin_unlock(&c->btree_cannibalize_lock);
 }
 
 static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op,
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 95e9a33de06a2..263c0d987929e 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1510,6 +1510,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	sema_init(&c->sb_write_mutex, 1);
 	mutex_init(&c->bucket_lock);
 	init_waitqueue_head(&c->btree_cache_wait);
+	spin_lock_init(&c->btree_cannibalize_lock);
 	init_waitqueue_head(&c->bucket_wait);
 	init_waitqueue_head(&c->gc_wait);
 	sema_init(&c->uuid_write_mutex, 1);
-- 
2.25.1

[PATCH AUTOSEL 4.9 12/90] RDMA/i40iw: Fix potential use after free

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit da046d5f895fca18d63b15ac8faebd5bf784e23a ]

Release variable dst after logging dst->error to avoid possible use after
free.

Link: https://lore.kernel.org/r/1573022651-37171-1-git-send-email-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 282a726351c81..ce1a4817ab923 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -2036,9 +2036,9 @@ static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 	dst = i40iw_get_dst_ipv6(&src_addr, &dst_addr);
 	if (!dst || dst->error) {
 		if (dst) {
-			dst_release(dst);
 			i40iw_pr_err("ip6_route_output returned dst->error = %d\n",
 				     dst->error);
+			dst_release(dst);
 		}
 		return rc;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.9 13/90] xfs: fix attr leaf header freemap.size underflow

[Sasha Levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit 2a2b5932db67586bacc560cc065d62faece5b996 ]

The leaf format xattr addition helper xfs_attr3_leaf_add_work()
adjusts the block freemap in a couple places. The first update drops
the size of the freemap that the caller had already selected to
place the xattr name/value data. Before the function returns, it
also checks whether the entries array has encroached on a freemap
range by virtue of the new entry addition. This is necessary because
the entries array grows from the start of the block (but end of the
block header) towards the end of the block while the name/value data
grows from the end of the block in the opposite direction. If the
associated freemap is already empty, however, size is zero and the
subtraction underflows the field and causes corruption.

This is reproduced rarely by generic/070. The observed behavior is
that a smaller sized freemap is aligned to the end of the entries
list, several subsequent xattr additions land in larger freemaps and
the entries list expands into the smaller freemap until it is fully
consumed and then underflows. Note that it is not otherwise a
corruption for the entries array to consume an empty freemap because
the nameval list (i.e. the firstused pointer in the xattr header)
starts beyond the end of the corrupted freemap.

Update the freemap size modification to account for the fact that
the freemap entry can be empty and thus stale.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_attr_leaf.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c
index 70da4113c2baf..ead6fdd41712b 100644
--- a/fs/xfs/libxfs/xfs_attr_leaf.c
+++ b/fs/xfs/libxfs/xfs_attr_leaf.c
@@ -1332,7 +1332,9 @@ xfs_attr3_leaf_add_work(
 	for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
 		if (ichdr->freemap[i].base == tmp) {
 			ichdr->freemap[i].base += sizeof(xfs_attr_leaf_entry_t);
-			ichdr->freemap[i].size -= sizeof(xfs_attr_leaf_entry_t);
+			ichdr->freemap[i].size -=
+				min_t(uint16_t, ichdr->freemap[i].size,
+						sizeof(xfs_attr_leaf_entry_t));
 		}
 	}
 	ichdr->usedbytes += xfs_attr_leaf_entsize(leaf, args->index);
-- 
2.25.1

[PATCH AUTOSEL 4.9 14/90] RDMA/iw_cgxb4: Fix an error handling path in 'c4iw_connect()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 9067f2f0b41d7e817fc8c5259bab1f17512b0147 ]

We should jump to fail3 in order to undo the 'xa_insert_irq()' call.

Link: https://lore.kernel.org/r/20190923190746.10964-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index a04a53acb24ff..a60e1c1b4b5e8 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -3245,7 +3245,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		if (raddr->sin_addr.s_addr == htonl(INADDR_ANY)) {
 			err = pick_local_ipaddrs(dev, cm_id);
 			if (err)
-				goto fail2;
+				goto fail3;
 		}
 
 		/* find a route */
@@ -3267,7 +3267,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		if (ipv6_addr_type(&raddr6->sin6_addr) == IPV6_ADDR_ANY) {
 			err = pick_local_ip6addrs(dev, cm_id);
 			if (err)
-				goto fail2;
+				goto fail3;
 		}
 
 		/* find a route */
-- 
2.25.1

[PATCH AUTOSEL 4.9 15/90] debugfs: Fix !DEBUG_FS debugfs_create_automount

[Sasha Levin]

From: Kusanagi Kouichi <slash@ac.auone-net.jp>

[ Upstream commit 4250b047039d324e0ff65267c8beb5bad5052a86 ]

If DEBUG_FS=n, compile fails with the following error:

kernel/trace/trace.c: In function 'tracing_init_dentry':
kernel/trace/trace.c:8658:9: error: passing argument 3 of 'debugfs_create_automount' from incompatible pointer type [-Werror=incompatible-pointer-types]
 8658 |         trace_automount, NULL);
      |         ^~~~~~~~~~~~~~~
      |         |
      |         struct vfsmount * (*)(struct dentry *, void *)
In file included from kernel/trace/trace.c:24:
./include/linux/debugfs.h:206:25: note: expected 'struct vfsmount * (*)(void *)' but argument is of type 'struct vfsmount * (*)(struct dentry *, void *)'
  206 |      struct vfsmount *(*f)(void *),
      |      ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Link: https://lore.kernel.org/r/20191121102021787.MLMY.25002.ppp.dion.ne.jp@dmta0003.auone-net.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/debugfs.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index b20a0945b5500..7aea750538840 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -77,6 +77,8 @@ static const struct file_operations __fops = {				\
 	.llseek  = generic_file_llseek,					\
 }
 
+typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
+
 #if defined(CONFIG_DEBUG_FS)
 
 struct dentry *debugfs_create_file(const char *name, umode_t mode,
@@ -96,7 +98,6 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
 struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 				      const char *dest);
 
-typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
 struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
 					debugfs_automount_t f,
@@ -211,7 +212,7 @@ static inline struct dentry *debugfs_create_symlink(const char *name,
 
 static inline struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
-					struct vfsmount *(*f)(void *),
+					debugfs_automount_t f,
 					void *data)
 {
 	return ERR_PTR(-ENODEV);
-- 
2.25.1

[PATCH AUTOSEL 4.9 16/90] CIFS: Properly process SMB3 lease breaks

[Sasha Levin]

From: Pavel Shilovsky <pshilov@microsoft.com>

[ Upstream commit 9bd4540836684013aaad6070a65d6fcdd9006625 ]

Currenly we doesn't assume that a server may break a lease
from RWH to RW which causes us setting a wrong lease state
on a file and thus mistakenly flushing data and byte-range
locks and purging cached data on the client. This leads to
performance degradation because subsequent IOs go directly
to the server.

Fix this by propagating new lease state and epoch values
to the oplock break handler through cifsFileInfo structure
and removing the use of cifsInodeInfo flags for that. It
allows to avoid some races of several lease/oplock breaks
using those flags in parallel.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/cifsglob.h |  9 ++++++---
 fs/cifs/file.c     | 10 +++++++---
 fs/cifs/misc.c     | 17 +++--------------
 fs/cifs/smb1ops.c  |  8 +++-----
 fs/cifs/smb2misc.c | 32 +++++++-------------------------
 fs/cifs/smb2ops.c  | 44 ++++++++++++++++++++++++++++++--------------
 fs/cifs/smb2pdu.h  |  2 +-
 7 files changed, 57 insertions(+), 65 deletions(-)

diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7ae21ad420fbf..a12258c32e8a3 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -242,8 +242,9 @@ struct smb_version_operations {
 	int (*check_message)(char *, unsigned int, struct TCP_Server_Info *);
 	bool (*is_oplock_break)(char *, struct TCP_Server_Info *);
 	int (*handle_cancelled_mid)(char *, struct TCP_Server_Info *);
-	void (*downgrade_oplock)(struct TCP_Server_Info *,
-					struct cifsInodeInfo *, bool);
+	void (*downgrade_oplock)(struct TCP_Server_Info *server,
+				 struct cifsInodeInfo *cinode, __u32 oplock,
+				 unsigned int epoch, bool *purge_cache);
 	/* process transaction2 response */
 	bool (*check_trans2)(struct mid_q_entry *, struct TCP_Server_Info *,
 			     char *, int);
@@ -1080,6 +1081,8 @@ struct cifsFileInfo {
 	unsigned int f_flags;
 	bool invalidHandle:1;	/* file closed via session abend */
 	bool oplock_break_cancelled:1;
+	unsigned int oplock_epoch; /* epoch from the lease break */
+	__u32 oplock_level; /* oplock/lease level from the lease break */
 	int count;
 	spinlock_t file_info_lock; /* protects four flag/count fields above */
 	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
@@ -1191,7 +1194,7 @@ struct cifsInodeInfo {
 	unsigned int epoch;		/* used to track lease state changes */
 #define CIFS_INODE_PENDING_OPLOCK_BREAK   (0) /* oplock break in progress */
 #define CIFS_INODE_PENDING_WRITERS	  (1) /* Writes in progress */
-#define CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2 (2) /* Downgrade oplock to L2 */
+#define CIFS_INODE_FLAG_UNUSED		  (2) /* Unused flag */
 #define CIFS_INO_DELETE_PENDING		  (3) /* delete pending on server */
 #define CIFS_INO_INVALID_MAPPING	  (4) /* pagecache is invalid */
 #define CIFS_INO_LOCK			  (5) /* lock bit for synchronization */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index b2919166855f5..dca78b6e9ea32 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3912,12 +3912,13 @@ void cifs_oplock_break(struct work_struct *work)
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
 	struct TCP_Server_Info *server = tcon->ses->server;
 	int rc = 0;
+	bool purge_cache = false;
 
 	wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS,
 			TASK_UNINTERRUPTIBLE);
 
-	server->ops->downgrade_oplock(server, cinode,
-		test_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, &cinode->flags));
+	server->ops->downgrade_oplock(server, cinode, cfile->oplock_level,
+				      cfile->oplock_epoch, &purge_cache);
 
 	if (!CIFS_CACHE_WRITE(cinode) && CIFS_CACHE_READ(cinode) &&
 						cifs_has_mand_locks(cinode)) {
@@ -3932,18 +3933,21 @@ void cifs_oplock_break(struct work_struct *work)
 		else
 			break_lease(inode, O_WRONLY);
 		rc = filemap_fdatawrite(inode->i_mapping);
-		if (!CIFS_CACHE_READ(cinode)) {
+		if (!CIFS_CACHE_READ(cinode) || purge_cache) {
 			rc = filemap_fdatawait(inode->i_mapping);
 			mapping_set_error(inode->i_mapping, rc);
 			cifs_zap_mapping(inode);
 		}
 		cifs_dbg(FYI, "Oplock flush inode %p rc %d\n", inode, rc);
+		if (CIFS_CACHE_WRITE(cinode))
+			goto oplock_break_ack;
 	}
 
 	rc = cifs_push_locks(cfile);
 	if (rc)
 		cifs_dbg(VFS, "Push locks rc = %d\n", rc);
 
+oplock_break_ack:
 	/*
 	 * releasing stale oplock after recent reconnect of smb session using
 	 * a now incorrect file handle is not a data integrity issue but do
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 5e75df69062d8..bdf151e949166 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -481,21 +481,10 @@ is_valid_oplock_break(char *buffer, struct TCP_Server_Info *srv)
 				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
 					&pCifsInode->flags);
 
-				/*
-				 * Set flag if the server downgrades the oplock
-				 * to L2 else clear.
-				 */
-				if (pSMB->OplockLevel)
-					set_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &pCifsInode->flags);
-				else
-					clear_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &pCifsInode->flags);
-
-				cifs_queue_oplock_break(netfile);
+				netfile->oplock_epoch = 0;
+				netfile->oplock_level = pSMB->OplockLevel;
 				netfile->oplock_break_cancelled = false;
+				cifs_queue_oplock_break(netfile);
 
 				spin_unlock(&tcon->open_file_lock);
 				spin_unlock(&cifs_tcp_ses_lock);
diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index 6f5d78b172bac..9a1f01c2f0209 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -378,12 +378,10 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
 
 static void
 cifs_downgrade_oplock(struct TCP_Server_Info *server,
-			struct cifsInodeInfo *cinode, bool set_level2)
+		      struct cifsInodeInfo *cinode, __u32 oplock,
+		      unsigned int epoch, bool *purge_cache)
 {
-	if (set_level2)
-		cifs_set_oplock_level(cinode, OPLOCK_READ);
-	else
-		cifs_set_oplock_level(cinode, 0);
+	cifs_set_oplock_level(cinode, oplock);
 }
 
 static bool
diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index 7b7b47e26dbd4..bddb2d7b39824 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -491,7 +491,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		cifs_dbg(FYI, "found in the open list\n");
 		cifs_dbg(FYI, "lease key match, lease break 0x%x\n",
-			 le32_to_cpu(rsp->NewLeaseState));
+			 lease_state);
 
 		if (ack_req)
 			cfile->oplock_break_cancelled = false;
@@ -500,17 +500,8 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags);
 
-		/*
-		 * Set or clear flags depending on the lease state being READ.
-		 * HANDLE caching flag should be added when the client starts
-		 * to defer closing remote file handles with HANDLE leases.
-		 */
-		if (lease_state & SMB2_LEASE_READ_CACHING_HE)
-			set_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-				&cinode->flags);
-		else
-			clear_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-				  &cinode->flags);
+		cfile->oplock_epoch = le16_to_cpu(rsp->Epoch);
+		cfile->oplock_level = lease_state;
 
 		cifs_queue_oplock_break(cfile);
 		kfree(lw);
@@ -533,7 +524,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		cifs_dbg(FYI, "found in the pending open list\n");
 		cifs_dbg(FYI, "lease key match, lease break 0x%x\n",
-			 le32_to_cpu(rsp->NewLeaseState));
+			 lease_state);
 
 		open->oplock = lease_state;
 	}
@@ -645,18 +636,9 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
 					&cinode->flags);
 
-				/*
-				 * Set flag if the server downgrades the oplock
-				 * to L2 else clear.
-				 */
-				if (rsp->OplockLevel)
-					set_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &cinode->flags);
-				else
-					clear_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &cinode->flags);
+				cfile->oplock_epoch = 0;
+				cfile->oplock_level = rsp->OplockLevel;
+
 				spin_unlock(&cfile->file_info_lock);
 
 				cifs_queue_oplock_break(cfile);
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index edd4c7292be00..67edd6e03f803 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1379,22 +1379,38 @@ static long smb3_fallocate(struct file *file, struct cifs_tcon *tcon, int mode,
 
 static void
 smb2_downgrade_oplock(struct TCP_Server_Info *server,
-			struct cifsInodeInfo *cinode, bool set_level2)
+		      struct cifsInodeInfo *cinode, __u32 oplock,
+		      unsigned int epoch, bool *purge_cache)
 {
-	if (set_level2)
-		server->ops->set_oplock_level(cinode, SMB2_OPLOCK_LEVEL_II,
-						0, NULL);
-	else
-		server->ops->set_oplock_level(cinode, 0, 0, NULL);
+	server->ops->set_oplock_level(cinode, oplock, 0, NULL);
 }
 
 static void
-smb21_downgrade_oplock(struct TCP_Server_Info *server,
-		       struct cifsInodeInfo *cinode, bool set_level2)
+smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,
+		       unsigned int epoch, bool *purge_cache);
+
+static void
+smb3_downgrade_oplock(struct TCP_Server_Info *server,
+		       struct cifsInodeInfo *cinode, __u32 oplock,
+		       unsigned int epoch, bool *purge_cache)
 {
-	server->ops->set_oplock_level(cinode,
-				      set_level2 ? SMB2_LEASE_READ_CACHING_HE :
-				      0, 0, NULL);
+	unsigned int old_state = cinode->oplock;
+	unsigned int old_epoch = cinode->epoch;
+	unsigned int new_state;
+
+	if (epoch > old_epoch) {
+		smb21_set_oplock_level(cinode, oplock, 0, NULL);
+		cinode->epoch = epoch;
+	}
+
+	new_state = cinode->oplock;
+	*purge_cache = false;
+
+	if ((old_state & CIFS_CACHE_READ_FLG) != 0 &&
+	    (new_state & CIFS_CACHE_READ_FLG) == 0)
+		*purge_cache = true;
+	else if (old_state == new_state && (epoch - old_epoch > 1))
+		*purge_cache = true;
 }
 
 static void
@@ -1709,7 +1725,7 @@ struct smb_version_operations smb21_operations = {
 	.print_stats = smb2_print_stats,
 	.is_oplock_break = smb2_is_valid_oplock_break,
 	.handle_cancelled_mid = smb2_handle_cancelled_mid,
-	.downgrade_oplock = smb21_downgrade_oplock,
+	.downgrade_oplock = smb2_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
@@ -1793,7 +1809,7 @@ struct smb_version_operations smb30_operations = {
 	.dump_share_caps = smb2_dump_share_caps,
 	.is_oplock_break = smb2_is_valid_oplock_break,
 	.handle_cancelled_mid = smb2_handle_cancelled_mid,
-	.downgrade_oplock = smb21_downgrade_oplock,
+	.downgrade_oplock = smb3_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
@@ -1883,7 +1899,7 @@ struct smb_version_operations smb311_operations = {
 	.dump_share_caps = smb2_dump_share_caps,
 	.is_oplock_break = smb2_is_valid_oplock_break,
 	.handle_cancelled_mid = smb2_handle_cancelled_mid,
-	.downgrade_oplock = smb21_downgrade_oplock,
+	.downgrade_oplock = smb3_downgrade_oplock,
 	.need_neg = smb2_need_neg,
 	.negotiate = smb2_negotiate,
 	.negotiate_wsize = smb2_negotiate_wsize,
diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h
index 1af7afae3ad18..1a0c480745738 100644
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -1025,7 +1025,7 @@ struct smb2_oplock_break {
 struct smb2_lease_break {
 	struct smb2_hdr hdr;
 	__le16 StructureSize; /* Must be 44 */
-	__le16 Reserved;
+	__le16 Epoch;
 	__le32 Flags;
 	__u8   LeaseKey[16];
 	__le32 CurrentLeaseState;
-- 
2.25.1

[PATCH AUTOSEL 4.9 17/90] kernel/sys.c: avoid copying possible padding bytes in copy_to_user

[Sasha Levin]

From: Joe Perches <joe@perches.com>

[ Upstream commit 5e1aada08cd19ea652b2d32a250501d09b02ff2e ]

Initialization is not guaranteed to zero padding bytes so use an
explicit memset instead to avoid leaking any kernel content in any
possible padding bytes.

Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sys.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 157277cbf83aa..546cdc911dad4 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1183,11 +1183,13 @@ SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
 
 SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
 {
-	struct oldold_utsname tmp = {};
+	struct oldold_utsname tmp;
 
 	if (!name)
 		return -EFAULT;
 
+	memset(&tmp, 0, sizeof(tmp));
+
 	down_read(&uts_sem);
 	memcpy(&tmp.sysname, &utsname()->sysname, __OLD_UTS_LEN);
 	memcpy(&tmp.nodename, &utsname()->nodename, __OLD_UTS_LEN);
-- 
2.25.1

[PATCH AUTOSEL 4.9 18/90] neigh_stat_seq_next() should increase position index

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 1e3f9f073c47bee7c23e77316b07bc12338c5bba ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 6578d1f8e6c4a..d267dc04d9f74 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2797,6 +2797,7 @@ static void *neigh_stat_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 		*pos = cpu+1;
 		return per_cpu_ptr(tbl->stats, cpu);
 	}
+	(*pos)++;
 	return NULL;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 19/90] rt_cpu_seq_next should increase position index

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit a3ea86739f1bc7e121d921842f0f4a8ab1af94d9 ]

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/route.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index c8c51bd2d695b..e9aae4686536a 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -271,6 +271,7 @@ static void *rt_cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 		*pos = cpu+1;
 		return &per_cpu(rt_cache_stat, cpu);
 	}
+	(*pos)++;
 	return NULL;
 
 }
-- 
2.25.1

[PATCH AUTOSEL 4.9 20/90] seqlock: Require WRITE_ONCE surrounding raw_seqcount_barrier

[Sasha Levin]

From: Marco Elver <elver@google.com>

[ Upstream commit bf07132f96d426bcbf2098227fb680915cf44498 ]

This patch proposes to require marked atomic accesses surrounding
raw_write_seqcount_barrier. We reason that otherwise there is no way to
guarantee propagation nor atomicity of writes before/after the barrier
[1]. For example, consider the compiler tears stores either before or
after the barrier; in this case, readers may observe a partial value,
and because readers are unaware that writes are going on (writes are not
in a seq-writer critical section), will complete the seq-reader critical
section while having observed some partial state.
[1] https://lwn.net/Articles/793253/

This came up when designing and implementing KCSAN, because KCSAN would
flag these accesses as data-races. After careful analysis, our reasoning
as above led us to conclude that the best thing to do is to propose an
amendment to the raw_seqcount_barrier usage.

Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/seqlock.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index ead97654c4e9a..1613fe5c668e1 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -242,6 +242,13 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  * usual consistency guarantee. It is one wmb cheaper, because we can
  * collapse the two back-to-back wmb()s.
  *
+ * Note that, writes surrounding the barrier should be declared atomic (e.g.
+ * via WRITE_ONCE): a) to ensure the writes become visible to other threads
+ * atomically, avoiding compiler optimizations; b) to document which writes are
+ * meant to propagate to the reader critical section. This is necessary because
+ * neither writes before and after the barrier are enclosed in a seq-writer
+ * critical section that would ensure readers are aware of ongoing writes.
+ *
  *      seqcount_t seq;
  *      bool X = true, Y = false;
  *
@@ -261,11 +268,11 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  *
  *      void write(void)
  *      {
- *              Y = true;
+ *              WRITE_ONCE(Y, true);
  *
  *              raw_write_seqcount_barrier(seq);
  *
- *              X = false;
+ *              WRITE_ONCE(X, false);
  *      }
  */
 static inline void raw_write_seqcount_barrier(seqcount_t *s)
-- 
2.25.1

[PATCH AUTOSEL 4.9 21/90] media: ti-vpe: cal: Restrict DMA to avoid memory corruption

[Sasha Levin]

From: Nikhil Devshatwar <nikhil.nd@ti.com>

[ Upstream commit 6e72eab2e7b7a157d554b8f9faed7676047be7c1 ]

When setting DMA for video capture from CSI channel, if the DMA size
is not given, it ends up writing as much data as sent by the camera.

This may lead to overwriting the buffers causing memory corruption.
Observed green lines on the default framebuffer.

Restrict the DMA to maximum height as specified in the S_FMT ioctl.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/ti-vpe/cal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 563b9636ab63b..803e0794ca131 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -690,12 +690,13 @@ static void pix_proc_config(struct cal_ctx *ctx)
 }
 
 static void cal_wr_dma_config(struct cal_ctx *ctx,
-			      unsigned int width)
+			      unsigned int width, unsigned int height)
 {
 	u32 val;
 
 	val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
 	set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK);
+	set_field(&val, height, CAL_WR_DMA_CTRL_YSIZE_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
 		  CAL_WR_DMA_CTRL_DTAG_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
@@ -1321,7 +1322,8 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 	csi2_lane_config(ctx);
 	csi2_ctx_config(ctx);
 	pix_proc_config(ctx);
-	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline);
+	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline,
+			  ctx->v_fmt.fmt.pix.height);
 	cal_wr_dma_addr(ctx, addr);
 	csi2_ppi_enable(ctx);
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 22/90] ACPI: EC: Reference count query handlers under lock

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 3df663a147fe077a6ee8444ec626738946e65547 ]

There is a race condition in acpi_ec_get_query_handler()
theoretically allowing query handlers to go away before refernce
counting them.

In order to avoid it, call kref_get() on query handlers under
ec->mutex.

Also simplify the code a bit while at it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 307b3e28f34ce..8781b5dc97f1c 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1049,29 +1049,21 @@ void acpi_ec_unblock_transactions(void)
 /* --------------------------------------------------------------------------
                                 Event Management
    -------------------------------------------------------------------------- */
-static struct acpi_ec_query_handler *
-acpi_ec_get_query_handler(struct acpi_ec_query_handler *handler)
-{
-	if (handler)
-		kref_get(&handler->kref);
-	return handler;
-}
-
 static struct acpi_ec_query_handler *
 acpi_ec_get_query_handler_by_value(struct acpi_ec *ec, u8 value)
 {
 	struct acpi_ec_query_handler *handler;
-	bool found = false;
 
 	mutex_lock(&ec->mutex);
 	list_for_each_entry(handler, &ec->list, node) {
 		if (value == handler->query_bit) {
-			found = true;
-			break;
+			kref_get(&handler->kref);
+			mutex_unlock(&ec->mutex);
+			return handler;
 		}
 	}
 	mutex_unlock(&ec->mutex);
-	return found ? acpi_ec_get_query_handler(handler) : NULL;
+	return NULL;
 }
 
 static void acpi_ec_query_handler_release(struct kref *kref)
-- 
2.25.1

[PATCH AUTOSEL 4.9 23/90] efi/arm: Defer probe of PCIe backed efifb on DT systems

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 64c8a0cd0a535891d5905c3a1651150f0f141439 ]

The new of_devlink support breaks PCIe probing on ARM platforms booting
via UEFI if the firmware exposes a EFI framebuffer that is backed by a
PCI device. The reason is that the probing order gets reversed,
resulting in a resource conflict on the framebuffer memory window when
the PCIe probes last, causing it to give up entirely.

Given that we rely on PCI quirks to deal with EFI framebuffers that get
moved around in memory, we cannot simply drop the memory reservation, so
instead, let's use the device link infrastructure to register this
dependency, and force the probing to occur in the expected order.

Co-developed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-9-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/arm-init.c | 107 ++++++++++++++++++++++++++++++--
 1 file changed, 103 insertions(+), 4 deletions(-)

diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
index 8ee91777abce7..e4ddd6e6edb31 100644
--- a/drivers/firmware/efi/arm-init.c
+++ b/drivers/firmware/efi/arm-init.c
@@ -14,10 +14,12 @@
 #define pr_fmt(fmt)	"efi: " fmt
 
 #include <linux/efi.h>
+#include <linux/fwnode.h>
 #include <linux/init.h>
 #include <linux/memblock.h>
 #include <linux/mm_types.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/platform_device.h>
 #include <linux/screen_info.h>
@@ -262,15 +264,112 @@ void __init efi_init(void)
 		efi_memmap_unmap();
 }
 
+static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
+{
+	u64 fb_base = screen_info.lfb_base;
+
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
+
+	return fb_base >= range->cpu_addr &&
+	       fb_base < (range->cpu_addr + range->size);
+}
+
+static struct device_node *find_pci_overlap_node(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_type(np, "pci") {
+		struct of_pci_range_parser parser;
+		struct of_pci_range range;
+		int err;
+
+		err = of_pci_range_parser_init(&parser, np);
+		if (err) {
+			pr_warn("of_pci_range_parser_init() failed: %d\n", err);
+			continue;
+		}
+
+		for_each_of_pci_range(&parser, &range)
+			if (efifb_overlaps_pci_range(&range))
+				return np;
+	}
+	return NULL;
+}
+
+/*
+ * If the efifb framebuffer is backed by a PCI graphics controller, we have
+ * to ensure that this relation is expressed using a device link when
+ * running in DT mode, or the probe order may be reversed, resulting in a
+ * resource reservation conflict on the memory window that the efifb
+ * framebuffer steals from the PCIe host bridge.
+ */
+static int efifb_add_links(const struct fwnode_handle *fwnode,
+			   struct device *dev)
+{
+	struct device_node *sup_np;
+	struct device *sup_dev;
+
+	sup_np = find_pci_overlap_node();
+
+	/*
+	 * If there's no PCI graphics controller backing the efifb, we are
+	 * done here.
+	 */
+	if (!sup_np)
+		return 0;
+
+	sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
+	of_node_put(sup_np);
+
+	/*
+	 * Return -ENODEV if the PCI graphics controller device hasn't been
+	 * registered yet.  This ensures that efifb isn't allowed to probe
+	 * and this function is retried again when new devices are
+	 * registered.
+	 */
+	if (!sup_dev)
+		return -ENODEV;
+
+	/*
+	 * If this fails, retrying this function at a later point won't
+	 * change anything. So, don't return an error after this.
+	 */
+	if (!device_link_add(dev, sup_dev, 0))
+		dev_warn(dev, "device_link_add() failed\n");
+
+	put_device(sup_dev);
+
+	return 0;
+}
+
+static const struct fwnode_operations efifb_fwnode_ops = {
+	.add_links = efifb_add_links,
+};
+
+static struct fwnode_handle efifb_fwnode = {
+	.ops = &efifb_fwnode_ops,
+};
+
 static int __init register_gop_device(void)
 {
-	void *pd;
+	struct platform_device *pd;
+	int err;
 
 	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
 		return 0;
 
-	pd = platform_device_register_data(NULL, "efi-framebuffer", 0,
-					   &screen_info, sizeof(screen_info));
-	return PTR_ERR_OR_ZERO(pd);
+	pd = platform_device_alloc("efi-framebuffer", 0);
+	if (!pd)
+		return -ENOMEM;
+
+	if (IS_ENABLED(CONFIG_PCI))
+		pd->dev.fwnode = &efifb_fwnode;
+
+	err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
+	if (err)
+		return err;
+
+	return platform_device_add(pd);
 }
 subsys_initcall(register_gop_device);
-- 
2.25.1

[PATCH AUTOSEL 4.9 24/90] dmaengine: zynqmp_dma: fix burst length configuration

[Sasha Levin]

From: Matthias Fend <matthias.fend@wolfvision.net>

[ Upstream commit cc88525ebffc757e00cc5a5d61da6271646c7f5f ]

Since the dma engine expects the burst length register content as
power of 2 value, the burst length needs to be converted first.
Additionally add a burst length range check to avoid corrupting unrelated
register bits.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/zynqmp_dma.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index 9069fb8543196..514763dcc3758 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -125,10 +125,12 @@
 /* Max transfer size per descriptor */
 #define ZYNQMP_DMA_MAX_TRANS_LEN	0x40000000
 
+/* Max burst lengths */
+#define ZYNQMP_DMA_MAX_DST_BURST_LEN    32768U
+#define ZYNQMP_DMA_MAX_SRC_BURST_LEN    32768U
+
 /* Reset values for data attributes */
 #define ZYNQMP_DMA_AXCACHE_VAL		0xF
-#define ZYNQMP_DMA_ARLEN_RST_VAL	0xF
-#define ZYNQMP_DMA_AWLEN_RST_VAL	0xF
 
 #define ZYNQMP_DMA_SRC_ISSUE_RST_VAL	0x1F
 
@@ -527,17 +529,19 @@ static void zynqmp_dma_handle_ovfl_int(struct zynqmp_dma_chan *chan, u32 status)
 
 static void zynqmp_dma_config(struct zynqmp_dma_chan *chan)
 {
-	u32 val;
+	u32 val, burst_val;
 
 	val = readl(chan->regs + ZYNQMP_DMA_CTRL0);
 	val |= ZYNQMP_DMA_POINT_TYPE_SG;
 	writel(val, chan->regs + ZYNQMP_DMA_CTRL0);
 
 	val = readl(chan->regs + ZYNQMP_DMA_DATA_ATTR);
+	burst_val = __ilog2_u32(chan->src_burst_len);
 	val = (val & ~ZYNQMP_DMA_ARLEN) |
-		(chan->src_burst_len << ZYNQMP_DMA_ARLEN_OFST);
+		((burst_val << ZYNQMP_DMA_ARLEN_OFST) & ZYNQMP_DMA_ARLEN);
+	burst_val = __ilog2_u32(chan->dst_burst_len);
 	val = (val & ~ZYNQMP_DMA_AWLEN) |
-		(chan->dst_burst_len << ZYNQMP_DMA_AWLEN_OFST);
+		((burst_val << ZYNQMP_DMA_AWLEN_OFST) & ZYNQMP_DMA_AWLEN);
 	writel(val, chan->regs + ZYNQMP_DMA_DATA_ATTR);
 }
 
@@ -551,8 +555,10 @@ static int zynqmp_dma_device_config(struct dma_chan *dchan,
 {
 	struct zynqmp_dma_chan *chan = to_chan(dchan);
 
-	chan->src_burst_len = config->src_maxburst;
-	chan->dst_burst_len = config->dst_maxburst;
+	chan->src_burst_len = clamp(config->src_maxburst, 1U,
+		ZYNQMP_DMA_MAX_SRC_BURST_LEN);
+	chan->dst_burst_len = clamp(config->dst_maxburst, 1U,
+		ZYNQMP_DMA_MAX_DST_BURST_LEN);
 
 	return 0;
 }
@@ -968,8 +974,8 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
 		return PTR_ERR(chan->regs);
 
 	chan->bus_width = ZYNQMP_DMA_BUS_WIDTH_64;
-	chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
-	chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
+	chan->dst_burst_len = ZYNQMP_DMA_MAX_DST_BURST_LEN;
+	chan->src_burst_len = ZYNQMP_DMA_MAX_SRC_BURST_LEN;
 	err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width);
 	if (err < 0) {
 		dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
-- 
2.25.1

[PATCH AUTOSEL 4.9 25/90] tracing: Set kernel_stack's caller size properly

[Sasha Levin]

From: Josef Bacik <jbacik@fb.com>

[ Upstream commit cbc3b92ce037f5e7536f6db157d185cd8b8f615c ]

I noticed when trying to use the trace-cmd python interface that reading the raw
buffer wasn't working for kernel_stack events.  This is because it uses a
stubbed version of __dynamic_array that doesn't do the __data_loc trick and
encode the length of the array into the field.  Instead it just shows up as a
size of 0.  So change this to __array and set the len to FTRACE_STACK_ENTRIES
since this is what we actually do in practice and matches how user_stack_trace
works.

Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com

Signed-off-by: Josef Bacik <jbacik@fb.com>
[ Pulled from the archeological digging of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_entries.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index d1cc37e78f997..1430f6bbb1a07 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -178,7 +178,7 @@ FTRACE_ENTRY(kernel_stack, stack_entry,
 
 	F_STRUCT(
 		__field(	int,		size	)
-		__dynamic_array(unsigned long,	caller	)
+		__array(	unsigned long,	caller,	FTRACE_STACK_ENTRIES	)
 	),
 
 	F_printk("\t=> (" IP_FMT ")\n\t=> (" IP_FMT ")\n\t=> (" IP_FMT ")\n"
-- 
2.25.1

[PATCH AUTOSEL 4.9 26/90] ext4: make dioread_nolock the default

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit 244adf6426ee31a83f397b700d964cff12a247d3 ]

This fixes the direct I/O versus writeback race which can reveal stale
data, and it improves the tail latency of commits on slow devices.

Link: https://lore.kernel.org/r/20200125022254.1101588-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 472fa29c6f604..b1fd544929f7e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1367,6 +1367,7 @@ static const match_table_t tokens = {
 	{Opt_auto_da_alloc, "auto_da_alloc"},
 	{Opt_noauto_da_alloc, "noauto_da_alloc"},
 	{Opt_dioread_nolock, "dioread_nolock"},
+	{Opt_dioread_lock, "nodioread_nolock"},
 	{Opt_dioread_lock, "dioread_lock"},
 	{Opt_discard, "discard"},
 	{Opt_nodiscard, "nodiscard"},
@@ -3548,6 +3549,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		set_opt(sb, NO_UID32);
 	/* xattr user namespace & acls are now defaulted on */
 	set_opt(sb, XATTR_USER);
+	set_opt(sb, DIOREAD_NOLOCK);
 #ifdef CONFIG_EXT4_FS_POSIX_ACL
 	set_opt(sb, POSIX_ACL);
 #endif
@@ -3616,9 +3618,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		goto failed_mount;
 
 	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
-		printk_once(KERN_WARNING "EXT4-fs: Warning: mounting "
-			    "with data=journal disables delayed "
-			    "allocation and O_DIRECT support!\n");
+		printk_once(KERN_WARNING "EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, and O_DIRECT support!\n");
+		clear_opt(sb, DIOREAD_NOLOCK);
 		if (test_opt2(sb, EXPLICIT_DELALLOC)) {
 			ext4_msg(sb, KERN_ERR, "can't mount with "
 				 "both data=journal and delalloc");
-- 
2.25.1

[PATCH AUTOSEL 4.9 27/90] ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

[Sasha Levin]

From: Mert Dirik <mertdirik@gmail.com>

[ Upstream commit 5b362498a79631f283578b64bf6f4d15ed4cc19a ]

Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC
"EZ Connect g").

This device uses ar5523 chipset and requires firmware to be loaded. Even
though pid of the device is 4507, this patch adds it as 4506 so that
AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid
4507.

Signed-off-by: Mert Dirik <mertdirik@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ar5523/ar5523.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c
index e492c7f0d311a..9f4ee1d125b68 100644
--- a/drivers/net/wireless/ath/ar5523/ar5523.c
+++ b/drivers/net/wireless/ath/ar5523/ar5523.c
@@ -1769,6 +1769,8 @@ static struct usb_device_id ar5523_id_table[] = {
 	AR5523_DEVICE_UX(0x0846, 0x4300),	/* Netgear / WG111U */
 	AR5523_DEVICE_UG(0x0846, 0x4250),	/* Netgear / WG111T */
 	AR5523_DEVICE_UG(0x0846, 0x5f00),	/* Netgear / WPN111 */
+	AR5523_DEVICE_UG(0x083a, 0x4506),	/* SMC / EZ Connect
+						   SMCWUSBT-G2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / AR5523_1 */
 	AR5523_DEVICE_UX(0x157e, 0x3205),	/* Umedia / AR5523_2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / TEW444UBEU */
-- 
2.25.1

[PATCH AUTOSEL 4.9 28/90] Bluetooth: Fix refcount use-after-free issue

[Sasha Levin]

From: Manish Mandlik <mmandlik@google.com>

[ Upstream commit 6c08fc896b60893c5d673764b0668015d76df462 ]

There is no lock preventing both l2cap_sock_release() and
chan->ops->close() from running at the same time.

If we consider Thread A running l2cap_chan_timeout() and Thread B running
l2cap_sock_release(), expected behavior is:
  A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
  A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()
  B::l2cap_sock_release()->sock_orphan()
  B::l2cap_sock_release()->l2cap_sock_kill()

where,
sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks
socket as SOCK_ZAPPED.

In l2cap_sock_kill(), there is an "if-statement" that checks if both
sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL
and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is
satisfied.

In the race condition, following occurs:
  A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb()
  B::l2cap_sock_release()->sock_orphan()
  B::l2cap_sock_release()->l2cap_sock_kill()
  A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()

In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and
A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug.

Similar condition occurs at other places where teardown/sock_kill is
happening:
  l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb()
  l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill()

  l2cap_conn_del()->l2cap_chan_del()->l2cap_sock_teardown_cb()
  l2cap_conn_del()->l2cap_sock_close_cb()->l2cap_sock_kill()

  l2cap_disconnect_req()->l2cap_chan_del()->l2cap_sock_teardown_cb()
  l2cap_disconnect_req()->l2cap_sock_close_cb()->l2cap_sock_kill()

  l2cap_sock_cleanup_listen()->l2cap_chan_close()->l2cap_sock_teardown_cb()
  l2cap_sock_cleanup_listen()->l2cap_sock_kill()

Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on
l2cap channel to ensure that the socket is killed only after marked as
zapped and orphan.

Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 26 +++++++++++++++-----------
 net/bluetooth/l2cap_sock.c | 16 +++++++++++++---
 2 files changed, 28 insertions(+), 14 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 11012a5090708..de085947c19c2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -414,6 +414,9 @@ static void l2cap_chan_timeout(struct work_struct *work)
 	BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
 
 	mutex_lock(&conn->chan_lock);
+	/* __set_chan_timer() calls l2cap_chan_hold(chan) while scheduling
+	 * this work. No need to call l2cap_chan_hold(chan) here again.
+	 */
 	l2cap_chan_lock(chan);
 
 	if (chan->state == BT_CONNECTED || chan->state == BT_CONFIG)
@@ -426,12 +429,12 @@ static void l2cap_chan_timeout(struct work_struct *work)
 
 	l2cap_chan_close(chan, reason);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
-	mutex_unlock(&conn->chan_lock);
 
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
+
+	mutex_unlock(&conn->chan_lock);
 }
 
 struct l2cap_chan *l2cap_chan_create(void)
@@ -1725,9 +1728,9 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
 
 		l2cap_chan_del(chan, err);
 
-		l2cap_chan_unlock(chan);
-
 		chan->ops->close(chan);
+
+		l2cap_chan_unlock(chan);
 		l2cap_chan_put(chan);
 	}
 
@@ -4327,6 +4330,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
 		return 0;
 	}
 
+	l2cap_chan_hold(chan);
 	l2cap_chan_lock(chan);
 
 	rsp.dcid = cpu_to_le16(chan->scid);
@@ -4335,12 +4339,11 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
 
 	chan->ops->set_shutdown(chan);
 
-	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, ECONNRESET);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
+
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
 	mutex_unlock(&conn->chan_lock);
@@ -4372,20 +4375,21 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
 		return 0;
 	}
 
+	l2cap_chan_hold(chan);
 	l2cap_chan_lock(chan);
 
 	if (chan->state != BT_DISCONN) {
 		l2cap_chan_unlock(chan);
+		l2cap_chan_put(chan);
 		mutex_unlock(&conn->chan_lock);
 		return 0;
 	}
 
-	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, 0);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
+
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
 	mutex_unlock(&conn->chan_lock);
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index a8ba752732c98..3db8cfebd069a 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1038,7 +1038,7 @@ done:
 }
 
 /* Kill socket (only if zapped and orphan)
- * Must be called on unlocked socket.
+ * Must be called on unlocked socket, with l2cap channel lock.
  */
 static void l2cap_sock_kill(struct sock *sk)
 {
@@ -1199,8 +1199,15 @@ static int l2cap_sock_release(struct socket *sock)
 
 	err = l2cap_sock_shutdown(sock, 2);
 
+	l2cap_chan_hold(l2cap_pi(sk)->chan);
+	l2cap_chan_lock(l2cap_pi(sk)->chan);
+
 	sock_orphan(sk);
 	l2cap_sock_kill(sk);
+
+	l2cap_chan_unlock(l2cap_pi(sk)->chan);
+	l2cap_chan_put(l2cap_pi(sk)->chan);
+
 	return err;
 }
 
@@ -1218,12 +1225,15 @@ static void l2cap_sock_cleanup_listen(struct sock *parent)
 		BT_DBG("child chan %p state %s", chan,
 		       state_to_string(chan->state));
 
+		l2cap_chan_hold(chan);
 		l2cap_chan_lock(chan);
+
 		__clear_chan_timer(chan);
 		l2cap_chan_close(chan, ECONNRESET);
-		l2cap_chan_unlock(chan);
-
 		l2cap_sock_kill(sk);
+
+		l2cap_chan_unlock(chan);
+		l2cap_chan_put(chan);
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 29/90] mm: pagewalk: fix termination condition in walk_pte_range()

[Sasha Levin]

From: Steven Price <steven.price@arm.com>

[ Upstream commit c02a98753e0a36ba65a05818626fa6adeb4e7c97 ]

If walk_pte_range() is called with a 'end' argument that is beyond the
last page of memory (e.g.  ~0UL) then the comparison between 'addr' and
'end' will always fail and the loop will be infinite.  Instead change the
comparison to >= while accounting for overflow.

Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zong Li <zong.li@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/pagewalk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index d95341cffc2f6..8d6290502631a 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -14,9 +14,9 @@ static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
 		err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
 		if (err)
 		       break;
-		addr += PAGE_SIZE;
-		if (addr == end)
+		if (addr >= end - PAGE_SIZE)
 			break;
+		addr += PAGE_SIZE;
 		pte++;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 30/90] Bluetooth: prefetch channel before killing sock

[Sasha Levin]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit 2a154903cec20fb64ff4d7d617ca53c16f8fd53a ]

Prefetch channel before killing sock in order to fix UAF like

 BUG: KASAN: use-after-free in l2cap_sock_release+0x24c/0x290 net/bluetooth/l2cap_sock.c:1212
 Read of size 8 at addr ffff8880944904a0 by task syz-fuzzer/9751

Reported-by: syzbot+c3c5bdea7863886115dc@syzkaller.appspotmail.com
Fixes: 6c08fc896b60 ("Bluetooth: Fix refcount use-after-free issue")
Cc: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_sock.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 3db8cfebd069a..bbf08c6092f4a 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -1189,6 +1189,7 @@ static int l2cap_sock_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
 	int err;
+	struct l2cap_chan *chan;
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
@@ -1198,15 +1199,16 @@ static int l2cap_sock_release(struct socket *sock)
 	bt_sock_unlink(&l2cap_sk_list, sk);
 
 	err = l2cap_sock_shutdown(sock, 2);
+	chan = l2cap_pi(sk)->chan;
 
-	l2cap_chan_hold(l2cap_pi(sk)->chan);
-	l2cap_chan_lock(l2cap_pi(sk)->chan);
+	l2cap_chan_hold(chan);
+	l2cap_chan_lock(chan);
 
 	sock_orphan(sk);
 	l2cap_sock_kill(sk);
 
-	l2cap_chan_unlock(l2cap_pi(sk)->chan);
-	l2cap_chan_put(l2cap_pi(sk)->chan);
+	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return err;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.9 31/90] KVM: fix overflow of zero page refcount with ksm running

[Sasha Levin]

From: Zhuang Yanying <ann.zhuangyanying@huawei.com>

[ Upstream commit 7df003c85218b5f5b10a7f6418208f31e813f38f ]

We are testing Virtual Machine with KSM on v5.4-rc2 kernel,
and found the zero_page refcount overflow.
The cause of refcount overflow is increased in try_async_pf
(get_user_page) without being decreased in mmu_set_spte()
while handling ept violation.
In kvm_release_pfn_clean(), only unreserved page will call
put_page. However, zero page is reserved.
So, as well as creating and destroy vm, the refcount of
zero page will continue to increase until it overflows.

step1:
echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan
echo 1 > /sys/kernel/pages_to_scan/run
echo 1 > /sys/kernel/pages_to_scan/use_zero_pages

step2:
just create several normal qemu kvm vms.
And destroy it after 10s.
Repeat this action all the time.

After a long period of time, all domains hang because
of the refcount of zero page overflow.

Qemu print error log as follow:
 …
 error: kvm run failed Bad address
 EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd
 ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4
 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
 SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
 TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
 GDT=     000f7070 00000037
 IDT=     000f70ae 00000000
 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
 DR6=00000000ffff0ff0 DR7=0000000000000400
 EFER=0000000000000000
 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04
 …

Meanwhile, a kernel warning is departed.

 [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30
 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G           OE     5.2.0-rc2 #5
 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30
 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0
 0 00 00 00 48 8b 47 08 a8
 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286
 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000
 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440
 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000
 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8
 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440
 [40914.836423] FS:  00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000
 [40914.836425] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0
 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [40914.836428] Call Trace:
 [40914.836433]  follow_page_pte+0x302/0x47b
 [40914.836437]  __get_user_pages+0xf1/0x7d0
 [40914.836441]  ? irq_work_queue+0x9/0x70
 [40914.836443]  get_user_pages_unlocked+0x13f/0x1e0
 [40914.836469]  __gfn_to_pfn_memslot+0x10e/0x400 [kvm]
 [40914.836486]  try_async_pf+0x87/0x240 [kvm]
 [40914.836503]  tdp_page_fault+0x139/0x270 [kvm]
 [40914.836523]  kvm_mmu_page_fault+0x76/0x5e0 [kvm]
 [40914.836588]  vcpu_enter_guest+0xb45/0x1570 [kvm]
 [40914.836632]  kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm]
 [40914.836645]  kvm_vcpu_ioctl+0x26e/0x5d0 [kvm]
 [40914.836650]  do_vfs_ioctl+0xa9/0x620
 [40914.836653]  ksys_ioctl+0x60/0x90
 [40914.836654]  __x64_sys_ioctl+0x16/0x20
 [40914.836658]  do_syscall_64+0x5b/0x180
 [40914.836664]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 [40914.836666] RIP: 0033:0x7fb61cb6bfc7

Signed-off-by: LinFeng <linfeng23@huawei.com>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 virt/kvm/kvm_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 4e4bb5dd2dcd5..266c9a31b1ba9 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -154,6 +154,7 @@ bool kvm_is_reserved_pfn(kvm_pfn_t pfn)
 	 */
 	if (pfn_valid(pfn))
 		return PageReserved(pfn_to_page(pfn)) &&
+		       !is_zero_pfn(pfn) &&
 		       !kvm_is_zone_device_pfn(pfn);
 
 	return true;
-- 
2.25.1

[PATCH AUTOSEL 4.9 32/90] ALSA: hda: Clear RIRB status before reading WP

[Sasha Levin]

From: Mohan Kumar <mkumard@nvidia.com>

[ Upstream commit 6d011d5057ff88ee556c000ac6fe0be23bdfcd72 ]

RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_controller.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index bd0e4710d15d7..79043b481d7b6 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -1158,16 +1158,23 @@ irqreturn_t azx_interrupt(int irq, void *dev_id)
 		if (snd_hdac_bus_handle_stream_irq(bus, status, stream_update))
 			active = true;
 
-		/* clear rirb int */
 		status = azx_readb(chip, RIRBSTS);
 		if (status & RIRB_INT_MASK) {
+			/*
+			 * Clearing the interrupt status here ensures that no
+			 * interrupt gets masked after the RIRB wp is read in
+			 * snd_hdac_bus_update_rirb. This avoids a possible
+			 * race condition where codec response in RIRB may
+			 * remain unserviced by IRQ, eventually falling back
+			 * to polling mode in azx_rirb_get_response.
+			 */
+			azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 			active = true;
 			if (status & RIRB_INT_RESPONSE) {
 				if (chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND)
 					udelay(80);
 				snd_hdac_bus_update_rirb(bus);
 			}
-			azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 		}
 	} while (active && ++repeat < 10);
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 33/90] skbuff: fix a data race in skb_queue_len()

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 86b18aaa2b5b5bb48e609cd591b3d2d0fdbe0442 ]

sk_buff.qlen can be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg

 read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
  unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
				 net/unix/af_unix.c:1761
  ____sys_sendmsg+0x33e/0x370
  ___sys_sendmsg+0xa6/0xf0
  __sys_sendmsg+0x69/0xf0
  __x64_sys_sendmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
  __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
  __skb_try_recv_datagram+0xbe/0x220
  unix_dgram_recvmsg+0xee/0x850
  ____sys_recvmsg+0x1fb/0x210
  ___sys_recvmsg+0xa2/0xf0
  __sys_recvmsg+0x66/0xf0
  __x64_sys_recvmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/skbuff.h | 14 +++++++++++++-
 net/unix/af_unix.c     | 11 +++++++++--
 2 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index e37112ac332f7..0380fd29824e0 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1549,6 +1549,18 @@ static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
 	return list_->qlen;
 }
 
+/**
+ *	skb_queue_len_lockless	- get queue length
+ *	@list_: list to measure
+ *
+ *	Return the length of an &sk_buff queue.
+ *	This variant can be used in lockless contexts.
+ */
+static inline __u32 skb_queue_len_lockless(const struct sk_buff_head *list_)
+{
+	return READ_ONCE(list_->qlen);
+}
+
 /**
  *	__skb_queue_head_init - initialize non-spinlock portions of sk_buff_head
  *	@list: queue to initialize
@@ -1752,7 +1764,7 @@ static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
 {
 	struct sk_buff *next, *prev;
 
-	list->qlen--;
+	WRITE_ONCE(list->qlen, list->qlen - 1);
 	next	   = skb->next;
 	prev	   = skb->prev;
 	skb->next  = skb->prev = NULL;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 32ae82a5596d9..bcd6ed6e7e25c 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -191,11 +191,17 @@ static inline int unix_may_send(struct sock *sk, struct sock *osk)
 	return unix_peer(osk) == NULL || unix_our_peer(sk, osk);
 }
 
-static inline int unix_recvq_full(struct sock const *sk)
+static inline int unix_recvq_full(const struct sock *sk)
 {
 	return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog;
 }
 
+static inline int unix_recvq_full_lockless(const struct sock *sk)
+{
+	return skb_queue_len_lockless(&sk->sk_receive_queue) >
+		READ_ONCE(sk->sk_max_ack_backlog);
+}
+
 struct sock *unix_peer_get(struct sock *s)
 {
 	struct sock *peer;
@@ -1793,7 +1799,8 @@ restart_locked:
 	 * - unix_peer(sk) == sk by time of get but disconnected before lock
 	 */
 	if (other != sk &&
-	    unlikely(unix_peer(other) != sk && unix_recvq_full(other))) {
+	    unlikely(unix_peer(other) != sk &&
+	    unix_recvq_full_lockless(other))) {
 		if (timeo) {
 			timeo = unix_wait_for_peer(other, timeo);
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 34/90] audit: CONFIG_CHANGE don't log internal bookkeeping as an event

[Sasha Levin]

From: Steve Grubb <sgrubb@redhat.com>

[ Upstream commit 70b3eeed49e8190d97139806f6fbaf8964306cdb ]

Common Criteria calls out for any action that modifies the audit trail to
be recorded. That usually is interpreted to mean insertion or removal of
rules. It is not required to log modification of the inode information
since the watch is still in effect. Additionally, if the rule is a never
rule and the underlying file is one they do not want events for, they
get an event for this bookkeeping update against their wishes.

Since no device/inode info is logged at insertion and no device/inode
information is logged on update, there is nothing meaningful being
communicated to the admin by the CONFIG_CHANGE updated_rules event. One
can assume that the rule was not "modified" because it is still watching
the intended target. If the device or inode cannot be resolved, then
audit_panic is called which is sufficient.

The correct resolution is to drop logging config_update events since
the watch is still in effect but just on another unknown inode.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit_watch.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 712469a3103ac..54b30c9bd8b13 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -316,8 +316,6 @@ static void audit_update_watch(struct audit_parent *parent,
 			if (oentry->rule.exe)
 				audit_remove_mark(oentry->rule.exe);
 
-			audit_watch_log_rule_change(r, owatch, "updated_rules");
-
 			call_rcu(&oentry->rcu, audit_free_rule_rcu);
 		}
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 35/90] selinux: sel_avc_get_stat_idx should increase position index

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 8d269a8e2a8f0bca89022f4ec98de460acb90365 ]

If seq_file .next function does not change position index,
read after some lseek can generate unexpected output.

$ dd if=/sys/fs/selinux/avc/cache_stats # usual output
lookups hits misses allocations reclaims frees
817223 810034 7189 7189 6992 7037
1934894 1926896 7998 7998 7632 7683
1322812 1317176 5636 5636 5456 5507
1560571 1551548 9023 9023 9056 9115
0+1 records in
0+1 records out
189 bytes copied, 5,1564e-05 s, 3,7 MB/s

$# read after lseek to midle of last line
$ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
056 9115   <<<< end of last line
1560571 1551548 9023 9023 9056 9115  <<< whole last line once again
0+1 records in
0+1 records out
45 bytes copied, 8,7221e-05 s, 516 kB/s

$# read after lseek beyond  end of of file
$ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
1560571 1551548 9023 9023 9056 9115  <<<< generates whole last line
0+1 records in
0+1 records out
36 bytes copied, 9,0934e-05 s, 396 kB/s

https://bugzilla.kernel.org/show_bug.cgi?id=206283

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/selinuxfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 72c145dd799f1..ef1226c1c3add 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1416,6 +1416,7 @@ static struct avc_cache_stats *sel_avc_get_stat_idx(loff_t *idx)
 		*idx = cpu + 1;
 		return &per_cpu(avc_cache_stats, cpu);
 	}
+	(*idx)++;
 	return NULL;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 36/90] scsi: lpfc: Fix RQ buffer leakage when no IOCBs available

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 39c4f1a965a9244c3ba60695e8ff8da065ec6ac4 ]

The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:

 Port Status Event: ... error 1=0x52004a01, error 2=0x218

The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.

When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.

Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.

[mkp: typo]

Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1c34dc3355498..08c76c361e8dc 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -15648,6 +15648,10 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 			list_add_tail(&iocbq->list, &first_iocbq->list);
 		}
 	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
 	return first_iocbq;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 37/90] scsi: lpfc: Fix coverity errors in fmdi attribute handling

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 4cb9e1ddaa145be9ed67b6a7de98ca705a43f998 ]

Coverity reported a memory corruption error for the fdmi attributes
routines:

  CID 15768 [Memory Corruption] Out-of-bounds access on FDMI

Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and
lpfc_fdmi_reg_port_list structures, a field was placed at the start of
payload that may have variable content. The field was given an arbitrary
type (uint32_t). The code then uses the field name to derive an address,
which it used in things such as memset and memcpy. The memset sizes or
memcpy lengths were larger than the arbitrary type, thus coverity reported
an error.

Fix by replacing the arbitrary fields with the real field structures
describing the payload.

Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_ct.c | 137 ++++++++++++++++++------------------
 drivers/scsi/lpfc/lpfc_hw.h |  36 +++++-----
 2 files changed, 85 insertions(+), 88 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 52afbcff362f9..b7940fffca637 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1541,8 +1541,8 @@ lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -1558,8 +1558,8 @@ lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* This string MUST be consistent with other FC platforms
 	 * supported by Broadcom.
@@ -1583,8 +1583,8 @@ lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->SerialNumber,
 		sizeof(ae->un.AttrString));
@@ -1605,8 +1605,8 @@ lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -1626,8 +1626,8 @@ lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelDesc,
 		sizeof(ae->un.AttrString));
@@ -1649,8 +1649,8 @@ lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t i, j, incr, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* Convert JEDEC ID to ascii for hardware version */
 	incr = vp->rev.biuRev;
@@ -1679,8 +1679,8 @@ lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, lpfc_release_version,
 		sizeof(ae->un.AttrString));
@@ -1701,8 +1701,8 @@ lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
@@ -1726,8 +1726,8 @@ lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -1746,8 +1746,8 @@ lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s %s %s",
 		 init_utsname()->sysname,
@@ -1769,7 +1769,7 @@ lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt =  cpu_to_be32(LPFC_MAX_CT_SIZE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -1785,8 +1785,8 @@ lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_node_name(vport,
 				ae->un.AttrString, 256);
@@ -1804,7 +1804,7 @@ lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Nothing is defined for this currently */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -1821,7 +1821,7 @@ lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Each driver instance corresponds to a single port */
 	ae->un.AttrInt =  cpu_to_be32(1);
@@ -1838,8 +1838,8 @@ lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_nodename,
 	       sizeof(struct lpfc_name));
@@ -1857,8 +1857,8 @@ lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -1877,7 +1877,7 @@ lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Driver doesn't have access to this information */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -1894,8 +1894,8 @@ lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "EMULEX",
 		sizeof(ae->un.AttrString));
@@ -1916,8 +1916,8 @@ lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 8 - FCP */
@@ -1936,7 +1936,7 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt = 0;
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
@@ -1986,7 +1986,7 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
 		switch (phba->fc_linkspeed) {
@@ -2050,7 +2050,7 @@ lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	hsp = (struct serv_parm *)&vport->fc_sparam;
 	ae->un.AttrInt = (((uint32_t) hsp->cmn.bbRcvSizeMsb) << 8) |
@@ -2070,8 +2070,8 @@ lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString),
 		 "/sys/class/scsi_host/host%d", shost->host_no);
@@ -2091,8 +2091,8 @@ lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s",
 		 init_utsname()->nodename);
@@ -2112,8 +2112,8 @@ lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2130,8 +2130,8 @@ lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.portName,
 	       sizeof(struct lpfc_name));
@@ -2148,8 +2148,8 @@ lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_port_name(vport, ae->un.AttrString, 256);
 	len += (len & 3) ? (4 - (len & 3)) : 4;
@@ -2167,7 +2167,7 @@ lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP)
 		ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTTYPE_NLPORT);
 	else
@@ -2185,7 +2185,7 @@ lpfc_fdmi_port_attr_class(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt = cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2200,8 +2200,8 @@ lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_portname,
 	       sizeof(struct lpfc_name));
@@ -2218,8 +2218,8 @@ lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 8 - FCP */
@@ -2237,7 +2237,7 @@ lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	/* Link Up - operational */
 	ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTSTATE_ONLINE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2253,7 +2253,7 @@ lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	vport->fdmi_num_disc = lpfc_find_map_node(vport);
 	ae->un.AttrInt = cpu_to_be32(vport->fdmi_num_disc);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2269,7 +2269,7 @@ lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(vport->fc_myDID);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2284,8 +2284,8 @@ lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Initiator",
 		sizeof(ae->un.AttrString));
@@ -2305,8 +2305,8 @@ lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrString, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2326,8 +2326,8 @@ lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Version 2.0",
 		sizeof(ae->un.AttrString));
@@ -2348,8 +2348,8 @@ lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -2368,7 +2368,7 @@ lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* SRIOV (type 3) is not supported */
 	if (vport->vpi)
@@ -2388,7 +2388,7 @@ lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(0);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2403,7 +2403,7 @@ lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(1);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2551,7 +2551,8 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Registered Port List */
 			/* One entry (port) per adapter */
 			rh->rpl.EntryCnt = cpu_to_be32(1);
-			memcpy(&rh->rpl.pe, &phba->pport->fc_sparam.portName,
+			memcpy(&rh->rpl.pe.PortName,
+			       &phba->pport->fc_sparam.portName,
 			       sizeof(struct lpfc_name));
 
 			/* point to the HBA attribute block */
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 3b970d3706008..daab21f940fb8 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1289,25 +1289,8 @@ struct fc_rdp_res_frame {
 /* lpfc_sli_ct_request defines the CT_IU preamble for FDMI commands */
 #define  SLI_CT_FDMI_Subtypes     0x10	/* Management Service Subtype */
 
-/*
- * Registered Port List Format
- */
-struct lpfc_fdmi_reg_port_list {
-	uint32_t EntryCnt;
-	uint32_t pe;		/* Variable-length array */
-};
-
-
 /* Definitions for HBA / Port attribute entries */
 
-struct lpfc_fdmi_attr_def { /* Defined in TLV format */
-	/* Structure is in Big Endian format */
-	uint32_t AttrType:16;
-	uint32_t AttrLen:16;
-	uint32_t AttrValue;  /* Marks start of Value (ATTRIBUTE_ENTRY) */
-};
-
-
 /* Attribute Entry */
 struct lpfc_fdmi_attr_entry {
 	union {
@@ -1318,7 +1301,13 @@ struct lpfc_fdmi_attr_entry {
 	} un;
 };
 
-#define LPFC_FDMI_MAX_AE_SIZE	sizeof(struct lpfc_fdmi_attr_entry)
+struct lpfc_fdmi_attr_def { /* Defined in TLV format */
+	/* Structure is in Big Endian format */
+	uint32_t AttrType:16;
+	uint32_t AttrLen:16;
+	/* Marks start of Value (ATTRIBUTE_ENTRY) */
+	struct lpfc_fdmi_attr_entry AttrValue;
+} __packed;
 
 /*
  * HBA Attribute Block
@@ -1342,13 +1331,20 @@ struct lpfc_fdmi_hba_ident {
 	struct lpfc_name PortName;
 };
 
+/*
+ * Registered Port List Format
+ */
+struct lpfc_fdmi_reg_port_list {
+	uint32_t EntryCnt;
+	struct lpfc_fdmi_port_entry pe;
+} __packed;
+
 /*
  * Register HBA(RHBA)
  */
 struct lpfc_fdmi_reg_hba {
 	struct lpfc_fdmi_hba_ident hi;
-	struct lpfc_fdmi_reg_port_list rpl;	/* variable-length array */
-/* struct lpfc_fdmi_attr_block   ab; */
+	struct lpfc_fdmi_reg_port_list rpl;
 };
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.9 38/90] drm/omap: fix possible object reference leak

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ]

The call to of_find_matching_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 136d30484d023..46111e9ee9a25 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -194,7 +194,7 @@ static int __init omapdss_boot_init(void)
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
 	if (dss == NULL || !of_device_is_available(dss))
-		return 0;
+		goto put_node;
 
 	omapdss_walk_device(dss, true);
 
@@ -219,6 +219,8 @@ static int __init omapdss_boot_init(void)
 		kfree(n);
 	}
 
+put_node:
+	of_node_put(dss);
 	return 0;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 39/90] RDMA/rxe: Fix configuration of atomic queue pair attributes

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit fb3063d31995cc4cf1d47a406bb61d6fb1b1d58d ]

From the comment above the definition of the roundup_pow_of_two() macro:

     The result is undefined when n == 0.

Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:

  UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  Call Trace:
   dump_stack+0xa5/0xe6
   ubsan_epilogue+0x9/0x26
   __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
   rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
   rxe_modify_qp+0x59/0x70 [rdma_rxe]
   _ib_modify_qp+0x5aa/0x7c0 [ib_core]
   ib_modify_qp+0x3b/0x50 [ib_core]
   cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
   __rdma_accept+0x1a7/0x650 [rdma_cm]
   nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
   cma_cm_event_handler+0x6b/0x330 [rdma_cm]
   cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
   cm_process_work+0x30/0x140 [ib_cm]
   cm_req_handler+0x11f4/0x1cd0 [ib_cm]
   cm_work_handler+0xb8/0x344e [ib_cm]
   process_one_work+0x569/0xb60
   worker_thread+0x7a/0x5d0
   kthread+0x1e6/0x210
   ret_from_fork+0x24/0x30

Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index d6672127808b7..186da467060cc 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -597,15 +597,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,
 	struct ib_gid_attr sgid_attr;
 
 	if (mask & IB_QP_MAX_QP_RD_ATOMIC) {
-		int max_rd_atomic = __roundup_pow_of_two(attr->max_rd_atomic);
+		int max_rd_atomic = attr->max_rd_atomic ?
+			roundup_pow_of_two(attr->max_rd_atomic) : 0;
 
 		qp->attr.max_rd_atomic = max_rd_atomic;
 		atomic_set(&qp->req.rd_atomic, max_rd_atomic);
 	}
 
 	if (mask & IB_QP_MAX_DEST_RD_ATOMIC) {
-		int max_dest_rd_atomic =
-			__roundup_pow_of_two(attr->max_dest_rd_atomic);
+		int max_dest_rd_atomic = attr->max_dest_rd_atomic ?
+			roundup_pow_of_two(attr->max_dest_rd_atomic) : 0;
 
 		qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 40/90] KVM: x86: fix incorrect comparison in trace event

[Sasha Levin]

From: Paolo Bonzini <pbonzini@redhat.com>

[ Upstream commit 147f1a1fe5d7e6b01b8df4d0cbd6f9eaf6b6c73b ]

The "u" field in the event has three states, -1/0/1.  Using u8 however means that
comparison with -1 will always fail, so change to signed char.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/mmutrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 756b14ecc957a..df1076b0eabf3 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -336,7 +336,7 @@ TRACE_EVENT(
 		/* These depend on page entry type, so compute them now.  */
 		__field(bool, r)
 		__field(bool, x)
-		__field(u8, u)
+		__field(signed char, u)
 	),
 
 	TP_fast_assign(
-- 
2.25.1

[PATCH AUTOSEL 4.9 41/90] x86/pkeys: Add check for pkey "overflow"

[Sasha Levin]

From: Dave Hansen <dave.hansen@linux.intel.com>

[ Upstream commit 16171bffc829272d5e6014bad48f680cb50943d9 ]

Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused.  They are unused, and even refer to a nonexistent
CONFIG option.

But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register.  As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.

Add a check to look for overflows.  Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.

This boots and passes the x86 pkey selftests.

Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/pkeys.h | 5 +++++
 arch/x86/kernel/fpu/xstate.c | 9 +++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
index c50d6dcf4a227..4e7273e176cb7 100644
--- a/arch/x86/include/asm/pkeys.h
+++ b/arch/x86/include/asm/pkeys.h
@@ -3,6 +3,11 @@
 
 #define ARCH_DEFAULT_PKEY	0
 
+/*
+ * If more than 16 keys are ever supported, a thorough audit
+ * will be necessary to ensure that the types that store key
+ * numbers and masks have sufficient capacity.
+ */
 #define arch_max_pkey() (boot_cpu_has(X86_FEATURE_OSPKE) ? 16 : 1)
 
 extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index e9d7f461b7fa5..dbd396c913488 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -871,8 +871,6 @@ const void *get_xsave_field_ptr(int xsave_state)
 
 #ifdef CONFIG_ARCH_HAS_PKEYS
 
-#define NR_VALID_PKRU_BITS (CONFIG_NR_PROTECTION_KEYS * 2)
-#define PKRU_VALID_MASK (NR_VALID_PKRU_BITS - 1)
 /*
  * This will go out and modify PKRU register to set the access
  * rights for @pkey to @init_val.
@@ -891,6 +889,13 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	if (!boot_cpu_has(X86_FEATURE_OSPKE))
 		return -EINVAL;
 
+	/*
+	 * This code should only be called with valid 'pkey'
+	 * values originating from in-kernel users.  Complain
+	 * if a bad value is observed.
+	 */
+	WARN_ON_ONCE(pkey >= arch_max_pkey());
+
 	/* Set the bits we need in PKRU:  */
 	if (init_val & PKEY_DISABLE_ACCESS)
 		new_pkru_bits |= PKRU_AD_BIT;
-- 
2.25.1

[PATCH AUTOSEL 4.9 42/90] bpf: Remove recursion prevention from rcu free callback

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 8a37963c7ac9ecb7f86f8ebda020e3f8d6d7b8a0 ]

If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 8648d7d297081..1253261fdb3ba 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -427,15 +427,7 @@ static void htab_elem_free_rcu(struct rcu_head *head)
 	struct htab_elem *l = container_of(head, struct htab_elem, rcu);
 	struct bpf_htab *htab = l->htab;
 
-	/* must increment bpf_prog_active to avoid kprobe+bpf triggering while
-	 * we're calling kfree, otherwise deadlock is possible if kprobes
-	 * are placed somewhere inside of slub
-	 */
-	preempt_disable();
-	__this_cpu_inc(bpf_prog_active);
 	htab_elem_free(htab, l);
-	__this_cpu_dec(bpf_prog_active);
-	preempt_enable();
 }
 
 static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
-- 
2.25.1

[PATCH AUTOSEL 4.9 43/90] dmaengine: tegra-apb: Prevent race conditions on channel's freeing

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 8e84172e372bdca20c305d92d51d33640d2da431 ]

It's incorrect to check the channel's "busy" state without taking a lock.
That shouldn't cause any real troubles, nevertheless it's always better
not to have any race conditions in the code.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra20-apb-dma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 4eaf92b2b8868..909739426f78c 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1208,8 +1208,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 
 	dev_dbg(tdc2dev(tdc), "Freeing channel %d\n", tdc->id);
 
-	if (tdc->busy)
-		tegra_dma_terminate_all(dc);
+	tegra_dma_terminate_all(dc);
 
 	spin_lock_irqsave(&tdc->lock, flags);
 	list_splice_init(&tdc->pending_sg_req, &sg_req_list);
-- 
2.25.1

[PATCH AUTOSEL 4.9 44/90] media: go7007: Fix URB type for interrupt handling

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit a3ea410cac41b19a5490aad7fe6d9a9a772e646e ]

Josef reported that his old-and-good Plextor ConvertX M402U video
converter spews lots of WARNINGs on the recent kernels, and it turned
out that the device uses a bulk endpoint for interrupt handling just
like 2250 board.

For fixing it, generalize the check with the proper verification of
the endpoint instead of hard-coded board type check.

Fixes: 7e5219d18e93 ("[media] go7007: Fix 2250 urb type")
Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/go7007/go7007-usb.c b/drivers/media/usb/go7007/go7007-usb.c
index ed9bcaf08d5ec..ddfaabd4c0813 100644
--- a/drivers/media/usb/go7007/go7007-usb.c
+++ b/drivers/media/usb/go7007/go7007-usb.c
@@ -1052,6 +1052,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	struct go7007_usb *usb;
 	const struct go7007_usb_board *board;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *ep;
 	unsigned num_i2c_devs;
 	char *name;
 	int video_pipe, i, v_urb_len;
@@ -1147,7 +1148,8 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	if (usb->intr_urb->transfer_buffer == NULL)
 		goto allocfail;
 
-	if (go->board_id == GO7007_BOARDID_SENSORAY_2250)
+	ep = usb->usbdev->ep_in[4];
+	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
 		usb_fill_bulk_urb(usb->intr_urb, usb->usbdev,
 			usb_rcvbulkpipe(usb->usbdev, 4),
 			usb->intr_urb->transfer_buffer, 2*sizeof(u16),
-- 
2.25.1

[PATCH AUTOSEL 4.9 45/90] Bluetooth: guard against controllers sending zero'd events

[Sasha Levin]

From: Alain Michaud <alainm@chromium.org>

[ Upstream commit 08bb4da90150e2a225f35e0f642cdc463958d696 ]

Some controllers have been observed to send zero'd events under some
conditions.  This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.

Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 757977c54d9ef..700a2eb161490 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5257,6 +5257,11 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 	u8 status = 0, event = hdr->evt, req_evt = 0;
 	u16 opcode = HCI_OP_NOP;
 
+	if (!event) {
+		bt_dev_warn(hdev, "Received unexpected HCI Event 00000000");
+		goto done;
+	}
+
 	if (hdev->sent_cmd && bt_cb(hdev->sent_cmd)->hci.req_event == event) {
 		struct hci_command_hdr *cmd_hdr = (void *) hdev->sent_cmd->data;
 		opcode = __le16_to_cpu(cmd_hdr->opcode);
@@ -5468,6 +5473,7 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		req_complete_skb(hdev, status, opcode, orig_skb);
 	}
 
+done:
 	kfree_skb(orig_skb);
 	kfree_skb(skb);
 	hdev->stat.evt_rx++;
-- 
2.25.1

[PATCH AUTOSEL 4.9 46/90] timekeeping: Prevent 32bit truncation in scale64_check_overflow()

[Sasha Levin]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit 4cbbc3a0eeed675449b1a4d080008927121f3da3 ]

While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.

Use div64_u64() instead to avoid the truncation to 32-bit.

[ tglx: Massaged changelog ]

Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timekeeping.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index e24e1f0c56906..e21b4d8b72405 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -950,9 +950,8 @@ static int scale64_check_overflow(u64 mult, u64 div, u64 *base)
 	    ((int)sizeof(u64)*8 - fls64(mult) < fls64(rem)))
 		return -EOVERFLOW;
 	tmp *= mult;
-	rem *= mult;
 
-	do_div(rem, div);
+	rem = div64_u64(rem * mult, div);
 	*base = tmp + rem;
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.9 47/90] drm/amdgpu: increase atombios cmd timeout

[Sasha Levin]

From: John Clements <john.clements@amd.com>

[ Upstream commit 1b3460a8b19688ad3033b75237d40fa580a5a953 ]

mitigates race condition on BACO reset between GPU bootcode and driver reload

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/atom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/atom.c b/drivers/gpu/drm/amd/amdgpu/atom.c
index 1b50e6c13fb3f..5fbf99d600587 100644
--- a/drivers/gpu/drm/amd/amdgpu/atom.c
+++ b/drivers/gpu/drm/amd/amdgpu/atom.c
@@ -748,8 +748,8 @@ static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 			cjiffies = jiffies;
 			if (time_after(cjiffies, ctx->last_jump_jiffies)) {
 				cjiffies -= ctx->last_jump_jiffies;
-				if ((jiffies_to_msecs(cjiffies) > 5000)) {
-					DRM_ERROR("atombios stuck in loop for more than 5secs aborting\n");
+				if ((jiffies_to_msecs(cjiffies) > 10000)) {
+					DRM_ERROR("atombios stuck in loop for more than 10secs aborting\n");
 					ctx->abort = true;
 				}
 			} else {
-- 
2.25.1

[PATCH AUTOSEL 4.9 48/90] Bluetooth: L2CAP: handle l2cap config request during open state

[Sasha Levin]

From: Howard Chung <howardchung@google.com>

[ Upstream commit 96298f640104e4cd9a913a6e50b0b981829b94ff ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index de085947c19c2..5e3f5c1ba07d6 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4107,7 +4107,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 		return 0;
 	}
 
-	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) {
+	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2 &&
+	    chan->state != BT_CONNECTED) {
 		cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
 				       chan->dcid);
 		goto unlock;
-- 
2.25.1

[PATCH AUTOSEL 4.9 49/90] media: tda10071: fix unsigned sign extension overflow

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a7463e2dc698075132de9905b89f495df888bb79 ]

The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.

Addresses-Coverity: ("Unintended sign extension")

Fixes: 267897a4708f ("[media] tda10071: implement DVBv5 statistics")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/tda10071.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c
index 37ebeef2bbd0b..43343091ea93e 100644
--- a/drivers/media/dvb-frontends/tda10071.c
+++ b/drivers/media/dvb-frontends/tda10071.c
@@ -483,10 +483,11 @@ static int tda10071_read_status(struct dvb_frontend *fe, enum fe_status *status)
 			goto error;
 
 		if (dev->delivery_system == SYS_DVBS) {
-			dev->dvbv3_ber = buf[0] << 24 | buf[1] << 16 |
-					 buf[2] << 8 | buf[3] << 0;
-			dev->post_bit_error += buf[0] << 24 | buf[1] << 16 |
-					       buf[2] << 8 | buf[3] << 0;
+			u32 bit_error = buf[0] << 24 | buf[1] << 16 |
+					buf[2] << 8 | buf[3] << 0;
+
+			dev->dvbv3_ber = bit_error;
+			dev->post_bit_error += bit_error;
 			c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
 			c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
 			dev->block_error += buf[4] << 8 | buf[5] << 0;
-- 
2.25.1

[PATCH AUTOSEL 4.9 50/90] xfs: don't ever return a stale pointer from __xfs_dir3_free_read

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 1cb5deb5bc095c070c09a4540c45f9c9ba24be43 ]

If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller.  After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.

Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.

Fixes: de14c5f541e7 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_dir2_node.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/xfs/libxfs/xfs_dir2_node.c b/fs/xfs/libxfs/xfs_dir2_node.c
index bbd1238852b3c..df7f33e60a4f6 100644
--- a/fs/xfs/libxfs/xfs_dir2_node.c
+++ b/fs/xfs/libxfs/xfs_dir2_node.c
@@ -212,6 +212,7 @@ __xfs_dir3_free_read(
 		xfs_buf_ioerror(*bpp, -EFSCORRUPTED);
 		xfs_verifier_error(*bpp);
 		xfs_trans_brelse(tp, *bpp);
+		*bpp = NULL;
 		return -EFSCORRUPTED;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 51/90] tpm: ibmvtpm: Wait for buffer to be set before proceeding

[Sasha Levin]

From: Stefan Berger <stefanb@linux.ibm.com>

[ Upstream commit d8d74ea3c00214aee1e1826ca18e77944812b9b4 ]

Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.

This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.

Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tpm/tpm_ibmvtpm.c | 9 +++++++++
 drivers/char/tpm/tpm_ibmvtpm.h | 1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index 84eca4f93b828..0fad6cf37bab4 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -550,6 +550,7 @@ static irqreturn_t ibmvtpm_interrupt(int irq, void *vtpm_instance)
 	 */
 	while ((crq = ibmvtpm_crq_get_next(ibmvtpm)) != NULL) {
 		ibmvtpm_crq_process(crq, ibmvtpm);
+		wake_up_interruptible(&ibmvtpm->crq_queue.wq);
 		crq->valid = 0;
 		smp_wmb();
 	}
@@ -596,6 +597,7 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 	}
 
 	crq_q->num_entry = CRQ_RES_BUF_SIZE / sizeof(*crq_q->crq_addr);
+	init_waitqueue_head(&crq_q->wq);
 	ibmvtpm->crq_dma_handle = dma_map_single(dev, crq_q->crq_addr,
 						 CRQ_RES_BUF_SIZE,
 						 DMA_BIDIRECTIONAL);
@@ -648,6 +650,13 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 	if (rc)
 		goto init_irq_cleanup;
 
+	if (!wait_event_timeout(ibmvtpm->crq_queue.wq,
+				ibmvtpm->rtce_buf != NULL,
+				HZ)) {
+		dev_err(dev, "CRQ response timed out\n");
+		goto init_irq_cleanup;
+	}
+
 	return tpm_chip_register(chip);
 init_irq_cleanup:
 	do {
diff --git a/drivers/char/tpm/tpm_ibmvtpm.h b/drivers/char/tpm/tpm_ibmvtpm.h
index 91dfe766d0800..4f6a124601db4 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.h
+++ b/drivers/char/tpm/tpm_ibmvtpm.h
@@ -31,6 +31,7 @@ struct ibmvtpm_crq_queue {
 	struct ibmvtpm_crq *crq_addr;
 	u32 index;
 	u32 num_entry;
+	wait_queue_head_t wq;
 };
 
 struct ibmvtpm_dev {
-- 
2.25.1

[PATCH AUTOSEL 4.9 52/90] tracing: Use address-of operator on section symbols

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit bf2cbe044da275021b2de5917240411a19e5c50d ]

Clang warns:

../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
        if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
                                       ^
1 warning generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).

Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com

Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 67cee2774a6b8..2388fb50d1885 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -7696,7 +7696,7 @@ __init static int tracer_alloc_buffers(void)
 		goto out_free_buffer_mask;
 
 	/* Only allocate trace_printk buffers if a trace_printk exists */
-	if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
+	if (&__stop___trace_bprintk_fmt != &__start___trace_bprintk_fmt)
 		/* Must be called before global_trace.buffer is allocated */
 		trace_printk_init_buffers();
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 53/90] serial: 8250_port: Don't service RX FIFO if throttled

[Sasha Levin]

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit f19c3f6c8109b8bab000afd35580929958e087a9 ]

When port's throttle callback is called, it should stop pushing any more
data into TTY buffer to avoid buffer overflow. This means driver has to
stop HW from receiving more data and assert the HW flow control. For
UARTs with auto HW flow control (such as 8250_omap) manual assertion of
flow control line is not possible and only way is to allow RX FIFO to
fill up, thus trigger auto HW flow control logic.

Therefore make sure that 8250 generic IRQ handler does not drain data
when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not
servicing, RX FIFO would trigger auto HW flow control when FIFO
occupancy reaches preset threshold, thus halting RX.
Since, error conditions in UART_LSR register are cleared just by reading
the register, data has to be drained in case there are FIFO errors, else
error information will lost.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319103230.16867-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_port.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5641b877dca53..827a641ac336e 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1806,6 +1806,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
+	bool skip_rx = false;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
@@ -1814,7 +1815,20 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (status & (UART_LSR_DR | UART_LSR_BI)) {
+	/*
+	 * If port is stopped and there are no error conditions in the
+	 * FIFO, then don't drain the FIFO, as this may lead to TTY buffer
+	 * overflow. Not servicing, RX FIFO would trigger auto HW flow
+	 * control when FIFO occupancy reaches preset threshold, thus
+	 * halting RX. This only works when auto HW flow control is
+	 * available.
+	 */
+	if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) &&
+	    (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) &&
+	    !(port->read_status_mask & UART_LSR_DR))
+		skip_rx = true;
+
+	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.9 54/90] serial: 8250_omap: Fix sleeping function called from invalid context during probe

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 4ce35a3617c0ac758c61122b2218b6c8c9ac9398 ]

When booting j721e the following bug is printed:

[    1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[    1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1
[    1.154832] 3 locks held by kworker/0:1/12:
[    1.154836]  #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154852]  #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154860]  #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138
[    1.154872] irq event stamp: 63096
[    1.154881] hardirqs last  enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78
[    1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80
[    1.154893] softirqs last  enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564
[    1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140
[    1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221
[    1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT)
[    1.154917] Workqueue: events deferred_probe_work_func
[    1.154923] Call trace:
[    1.154928]  dump_backtrace+0x0/0x190
[    1.154933]  show_stack+0x14/0x20
[    1.154940]  dump_stack+0xe0/0x148
[    1.154946]  ___might_sleep+0x150/0x1f0
[    1.154952]  __might_sleep+0x4c/0x80
[    1.154957]  wait_for_completion_timeout+0x40/0x140
[    1.154964]  ti_sci_set_device_state+0xa0/0x158
[    1.154969]  ti_sci_cmd_get_device_exclusive+0x14/0x20
[    1.154977]  ti_sci_dev_start+0x34/0x50
[    1.154984]  genpd_runtime_resume+0x78/0x1f8
[    1.154991]  __rpm_callback+0x3c/0x140
[    1.154996]  rpm_callback+0x20/0x80
[    1.155001]  rpm_resume+0x568/0x758
[    1.155007]  __pm_runtime_resume+0x44/0xb0
[    1.155013]  omap8250_probe+0x2b4/0x508
[    1.155019]  platform_drv_probe+0x50/0xa0
[    1.155023]  really_probe+0xd4/0x318
[    1.155028]  driver_probe_device+0x54/0xe8
[    1.155033]  __device_attach_driver+0x80/0xb8
[    1.155039]  bus_for_each_drv+0x74/0xc0
[    1.155044]  __device_attach+0xdc/0x138
[    1.155049]  device_initial_probe+0x10/0x18
[    1.155053]  bus_probe_device+0x98/0xa0
[    1.155058]  deferred_probe_work_func+0x74/0xb0
[    1.155063]  process_one_work+0x280/0x6e8
[    1.155068]  worker_thread+0x48/0x430
[    1.155073]  kthread+0x108/0x138
[    1.155079]  ret_from_fork+0x10/0x18

To fix the bug we need to first call pm_runtime_enable() prior to any
pm_runtime calls.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index a3adf21f9dcec..7d4680ef5307d 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1194,11 +1194,11 @@ static int omap8250_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->rx_dma_lock);
 
 	device_init_wakeup(&pdev->dev, true);
+	pm_runtime_enable(&pdev->dev);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
 
 	pm_runtime_irq_safe(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
 
 	pm_runtime_get_sync(&pdev->dev);
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 55/90] serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout

[Sasha Levin]

From: Vignesh Raghavendra <vigneshr@ti.com>

[ Upstream commit 7cf4df30a98175033e9849f7f16c46e96ba47f41 ]

Terminate and flush DMA internal buffers, before pushing RX data to
higher layer. Otherwise, this will lead to data corruption, as driver
would end up pushing stale buffer data to higher layer while actual data
is still stuck inside DMA hardware and has yet not arrived at the
memory.
While at that, replace deprecated dmaengine_terminate_all() with
dmaengine_terminate_async().

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_omap.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 7d4680ef5307d..d41be02abced2 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -773,7 +773,10 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 
 	count = dma->rx_size - state.residue;
-
+	if (count < dma->rx_size)
+		dmaengine_terminate_async(dma->rxchan);
+	if (!count)
+		goto unlock;
 	ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
 
 	p->port.icount.rx += ret;
@@ -811,7 +814,6 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
 
 	__dma_rx_do_complete(p);
-	dmaengine_terminate_all(dma->rxchan);
 }
 
 static int omap_8250_rx_dma(struct uart_8250_port *p)
-- 
2.25.1

[PATCH AUTOSEL 4.9 56/90] cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_work_fn

[Sasha Levin]

From: Pratik Rajesh Sampat <psampat@linux.ibm.com>

[ Upstream commit d95fe371ecd28901f11256c610b988ed44e36ee2 ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_work_fn'

Fixes: 227942809b52 ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/powernv-cpufreq.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index b4fc65512aad3..c3b05676e0dbe 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -802,6 +802,7 @@ static struct notifier_block powernv_cpufreq_reboot_nb = {
 void powernv_cpufreq_work_fn(struct work_struct *work)
 {
 	struct chip *chip = container_of(work, struct chip, throttle);
+	struct cpufreq_policy *policy;
 	unsigned int cpu;
 	cpumask_t mask;
 
@@ -816,12 +817,14 @@ void powernv_cpufreq_work_fn(struct work_struct *work)
 	chip->restore = false;
 	for_each_cpu(cpu, &mask) {
 		int index;
-		struct cpufreq_policy policy;
 
-		cpufreq_get_policy(&policy, cpu);
-		index = cpufreq_table_find_index_c(&policy, policy.cur);
-		powernv_cpufreq_target_index(&policy, index);
-		cpumask_andnot(&mask, &mask, policy.cpus);
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			continue;
+		index = cpufreq_table_find_index_c(policy, policy->cur);
+		powernv_cpufreq_target_index(policy, index);
+		cpumask_andnot(&mask, &mask, policy->cpus);
+		cpufreq_cpu_put(policy);
 	}
 out:
 	put_online_cpus();
-- 
2.25.1

[PATCH AUTOSEL 4.9 57/90] tools: gpio-hammer: Avoid potential overflow in main

[Sasha Levin]

From: Gabriel Ravier <gabravier@gmail.com>

[ Upstream commit d1ee7e1f5c9191afb69ce46cc7752e4257340a31 ]

If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user

Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/gpio/gpio-hammer.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c
index 37b3f141053df..85f45800f881f 100644
--- a/tools/gpio/gpio-hammer.c
+++ b/tools/gpio/gpio-hammer.c
@@ -171,7 +171,14 @@ int main(int argc, char **argv)
 			device_name = optarg;
 			break;
 		case 'o':
-			lines[i] = strtoul(optarg, NULL, 10);
+			/*
+			 * Avoid overflow. Do not immediately error, we want to
+			 * be able to accurately report on the amount of times
+			 * '-o' was given to give an accurate error message
+			 */
+			if (i < GPIOHANDLES_MAX)
+				lines[i] = strtoul(optarg, NULL, 10);
+
 			i++;
 			break;
 		case '?':
@@ -179,6 +186,14 @@ int main(int argc, char **argv)
 			return -1;
 		}
 	}
+
+	if (i >= GPIOHANDLES_MAX) {
+		fprintf(stderr,
+			"Only %d occurences of '-o' are allowed, %d were found\n",
+			GPIOHANDLES_MAX, i + 1);
+		return -1;
+	}
+
 	nlines = i;
 
 	if (!device_name || !nlines) {
-- 
2.25.1

[PATCH AUTOSEL 4.9 58/90] SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit b25b60d7bfb02a74bc3c2d998e09aab159df8059 ]

'maxlen' is the total size of the destination buffer. There is only one
caller and this value is 256.

When we compute the size already used and what we would like to add in
the buffer, the trailling NULL character is not taken into account.
However, this trailling character will be added by the 'strcat' once we
have checked that we have enough place.

So, there is a off-by-one issue and 1 byte of the stack could be
erroneously overwridden.

Take into account the trailling NULL, when checking if there is enough
place in the destination buffer.

While at it, also replace a 'sprintf' by a safer 'snprintf', check for
output truncation and avoid a superfluous 'strlen'.

Fixes: dc9a16e49dbba ("svc: Add /proc/sys/sunrpc/transport files")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ cel: very minor fix to documenting comment
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/svc_xprt.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 42ce3ed216376..56e4ac8e2e994 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -103,8 +103,17 @@ void svc_unreg_xprt_class(struct svc_xprt_class *xcl)
 }
 EXPORT_SYMBOL_GPL(svc_unreg_xprt_class);
 
-/*
- * Format the transport list for printing
+/**
+ * svc_print_xprts - Format the transport list for printing
+ * @buf: target buffer for formatted address
+ * @maxlen: length of target buffer
+ *
+ * Fills in @buf with a string containing a list of transport names, each name
+ * terminated with '\n'. If the buffer is too small, some entries may be
+ * missing, but it is guaranteed that all lines in the output buffer are
+ * complete.
+ *
+ * Returns positive length of the filled-in string.
  */
 int svc_print_xprts(char *buf, int maxlen)
 {
@@ -117,9 +126,9 @@ int svc_print_xprts(char *buf, int maxlen)
 	list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
 		int slen;
 
-		sprintf(tmpstr, "%s %d\n", xcl->xcl_name, xcl->xcl_max_payload);
-		slen = strlen(tmpstr);
-		if (len + slen > maxlen)
+		slen = snprintf(tmpstr, sizeof(tmpstr), "%s %d\n",
+				xcl->xcl_name, xcl->xcl_max_payload);
+		if (slen >= sizeof(tmpstr) || len + slen >= maxlen)
 			break;
 		len += slen;
 		strcat(buf, tmpstr);
-- 
2.25.1

[PATCH AUTOSEL 4.9 59/90] svcrdma: Fix leak of transport addresses

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 1a33d8a284b1e85e03b8c7b1ea8fb985fccd1d71 ]

Kernel memory leak detected:

unreferenced object 0xffff888849cdf480 (size 8):
  comm "kworker/u8:3", pid 2086, jiffies 4297898756 (age 4269.856s)
  hex dump (first 8 bytes):
    30 00 cd 49 88 88 ff ff                          0..I....
  backtrace:
    [<00000000acfc370b>] __kmalloc_track_caller+0x137/0x183
    [<00000000a2724354>] kstrdup+0x2b/0x43
    [<0000000082964f84>] xprt_rdma_format_addresses+0x114/0x17d [rpcrdma]
    [<00000000dfa6ed00>] xprt_setup_rdma_bc+0xc0/0x10c [rpcrdma]
    [<0000000073051a83>] xprt_create_transport+0x3f/0x1a0 [sunrpc]
    [<0000000053531a8e>] rpc_create+0x118/0x1cd [sunrpc]
    [<000000003a51b5f8>] setup_callback_client+0x1a5/0x27d [nfsd]
    [<000000001bd410af>] nfsd4_process_cb_update.isra.7+0x16c/0x1ac [nfsd]
    [<000000007f4bbd56>] nfsd4_run_cb_work+0x4c/0xbd [nfsd]
    [<0000000055c5586b>] process_one_work+0x1b2/0x2fe
    [<00000000b1e3e8ef>] worker_thread+0x1a6/0x25a
    [<000000005205fb78>] kthread+0xf6/0xfb
    [<000000006d2dc057>] ret_from_fork+0x3a/0x50

Introduce a call to xprt_rdma_free_addresses() similar to the way
that the TCP backchannel releases a transport's peer address
strings.

Fixes: 5d252f90a800 ("svcrdma: Add class for RDMA backwards direction transport")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
index 6035c5a380a6b..b3d48c6243c80 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -277,6 +277,7 @@ xprt_rdma_bc_put(struct rpc_xprt *xprt)
 {
 	dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
 
+	xprt_rdma_free_addresses(xprt);
 	xprt_free(xprt);
 	module_put(THIS_MODULE);
 }
-- 
2.25.1

[PATCH AUTOSEL 4.9 60/90] ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len

[Sasha Levin]

From: Liu Song <liu.song11@zte.com.cn>

[ Upstream commit acc5af3efa303d5f36cc8c0f61716161f6ca1384 ]

In “ubifs_check_node”, when the value of "node_len" is abnormal,
the code will goto label of "out_len" for execution. Then, in the
following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE",
in "print_hex_dump", an out-of-bounds access may occur due to the
wrong "ch->len".

Therefore, when the value of "node_len" is abnormal, data length
should to be adjusted to a reasonable safe range. At this time,
structured data is not credible, so dump the corrupted data directly
for analysis.

Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ubifs/io.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 97be412153328..9213a9e046ae0 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -237,7 +237,7 @@ int ubifs_is_mapped(const struct ubifs_info *c, int lnum)
 int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 		     int offs, int quiet, int must_chk_crc)
 {
-	int err = -EINVAL, type, node_len;
+	int err = -EINVAL, type, node_len, dump_node = 1;
 	uint32_t crc, node_crc, magic;
 	const struct ubifs_ch *ch = buf;
 
@@ -290,10 +290,22 @@ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 out_len:
 	if (!quiet)
 		ubifs_err(c, "bad node length %d", node_len);
+	if (type == UBIFS_DATA_NODE && node_len > UBIFS_DATA_NODE_SZ)
+		dump_node = 0;
 out:
 	if (!quiet) {
 		ubifs_err(c, "bad node at LEB %d:%d", lnum, offs);
-		ubifs_dump_node(c, buf);
+		if (dump_node) {
+			ubifs_dump_node(c, buf);
+		} else {
+			int safe_len = min3(node_len, c->leb_size - offs,
+				(int)UBIFS_MAX_DATA_NODE_SZ);
+			pr_err("\tprevent out-of-bounds memory access\n");
+			pr_err("\ttruncated data node length      %d\n", safe_len);
+			pr_err("\tcorrupted data node:\n");
+			print_hex_dump(KERN_ERR, "\t", DUMP_PREFIX_OFFSET, 32, 1,
+					buf, safe_len, 0);
+		}
 		dump_stack();
 	}
 	return err;
-- 
2.25.1

[PATCH AUTOSEL 4.9 61/90] ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor

[Sasha Levin]

From: Andreas Steinmetz <ast@domdv.de>

[ Upstream commit 5c6cd7021a05a02fcf37f360592d7c18d4d807fb ]

The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra
endpoint descriptor.

The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00

As the code in snd_usbmidi_get_ms_info() looks only at the
first extra descriptor to find USB_DT_CS_ENDPOINT the device
as such is recognized but there is neither input nor output
configured.

The patch iterates through the extra descriptors to find the
proper one. With this patch the device is correctly configured.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/midi.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 0676e7d485def..b8d4b5b3e54a1 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1805,6 +1805,28 @@ static int snd_usbmidi_create_endpoints(struct snd_usb_midi *umidi,
 	return 0;
 }
 
+static struct usb_ms_endpoint_descriptor *find_usb_ms_endpoint_descriptor(
+					struct usb_host_endpoint *hostep)
+{
+	unsigned char *extra = hostep->extra;
+	int extralen = hostep->extralen;
+
+	while (extralen > 3) {
+		struct usb_ms_endpoint_descriptor *ms_ep =
+				(struct usb_ms_endpoint_descriptor *)extra;
+
+		if (ms_ep->bLength > 3 &&
+		    ms_ep->bDescriptorType == USB_DT_CS_ENDPOINT &&
+		    ms_ep->bDescriptorSubtype == UAC_MS_GENERAL)
+			return ms_ep;
+		if (!extra[0])
+			break;
+		extralen -= extra[0];
+		extra += extra[0];
+	}
+	return NULL;
+}
+
 /*
  * Returns MIDIStreaming device capabilities.
  */
@@ -1842,11 +1864,8 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi *umidi,
 		ep = get_ep_desc(hostep);
 		if (!usb_endpoint_xfer_bulk(ep) && !usb_endpoint_xfer_int(ep))
 			continue;
-		ms_ep = (struct usb_ms_endpoint_descriptor *)hostep->extra;
-		if (hostep->extralen < 4 ||
-		    ms_ep->bLength < 4 ||
-		    ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT ||
-		    ms_ep->bDescriptorSubtype != UAC_MS_GENERAL)
+		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
+		if (!ms_ep)
 			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
-- 
2.25.1

[PATCH AUTOSEL 4.9 62/90] mm/filemap.c: clear page error before actual read

[Sasha Levin]

From: Xianting Tian <xianting_tian@126.com>

[ Upstream commit faffdfa04fa11ccf048cebdde73db41ede0679e0 ]

Mount failure issue happens under the scenario: Application forked dozens
of threads to mount the same number of cramfs images separately in docker,
but several mounts failed with high probability.  Mount failed due to the
checking result of the page(read from the superblock of loop dev) is not
uptodate after wait_on_page_locked(page) returned in function cramfs_read:

   wait_on_page_locked(page);
   if (!PageUptodate(page)) {
      ...
   }

The reason of the checking result of the page not uptodate: systemd-udevd
read the loopX dev before mount, because the status of loopX is Lo_unbound
at this time, so loop_make_request directly trigger the calling of io_end
handler end_buffer_async_read, which called SetPageError(page).  So It
caused the page can't be set to uptodate in function
end_buffer_async_read:

   if(page_uptodate && !PageError(page)) {
      SetPageUptodate(page);
   }

Then mount operation is performed, it used the same page which is just
accessed by systemd-udevd above, Because this page is not uptodate, it
will launch a actual read via submit_bh, then wait on this page by calling
wait_on_page_locked(page).  When the I/O of the page done, io_end handler
end_buffer_async_read is called, because no one cleared the page
error(during the whole read path of mount), which is caused by
systemd-udevd reading, so this page is still in "PageError" status, which
can't be set to uptodate in function end_buffer_async_read, then caused
mount failure.

But sometimes mount succeed even through systemd-udeved read loopX dev
just before, The reason is systemd-udevd launched other loopX read just
between step 3.1 and 3.2, the steps as below:

1, loopX dev default status is Lo_unbound;
2, systemd-udved read loopX dev (page is set to PageError);
3, mount operation
   1) set loopX status to Lo_bound;
   ==>systemd-udevd read loopX dev<==
   2) read loopX dev(page has no error)
   3) mount succeed

As the loopX dev status is set to Lo_bound after step 3.1, so the other
loopX dev read by systemd-udevd will go through the whole I/O stack, part
of the call trace as below:

   SYS_read
      vfs_read
          do_sync_read
              blkdev_aio_read
                 generic_file_aio_read
                     do_generic_file_read:
                        ClearPageError(page);
                        mapping->a_ops->readpage(filp, page);

here, mapping->a_ops->readpage() is blkdev_readpage.  In latest kernel,
some function name changed, the call trace as below:

   blkdev_read_iter
      generic_file_read_iter
         generic_file_buffered_read:
            /*
             * A previous I/O error may have been due to temporary
             * failures, eg. mutipath errors.
             * Pg_error will be set again if readpage fails.
             */
            ClearPageError(page);
            /* Start the actual read. The read will unlock the page*/
            error=mapping->a_ops->readpage(flip, page);

We can see ClearPageError(page) is called before the actual read,
then the read in step 3.2 succeed.

This patch is to add the calling of ClearPageError just before the actual
read of read path of cramfs mount.  Without the patch, the call trace as
below when performing cramfs mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page
               do_read_cache_page:
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, the call trace as below when performing mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page:
               do_read_cache_page:
                  ClearPageError(page); <== new add
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, mount operation trigger the calling of
ClearPageError(page) before the actual read, the page has no error if no
additional page error happen when I/O done.

Signed-off-by: Xianting Tian <xianting_tian@126.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: <yubin@h3c.com>
Link: http://lkml.kernel.org/r/1583318844-22971-1-git-send-email-xianting_tian@126.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/filemap.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/mm/filemap.c b/mm/filemap.c
index b046d8f147e20..05af91f495f53 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2474,6 +2474,14 @@ filler:
 		unlock_page(page);
 		goto out;
 	}
+
+	/*
+	 * A previous I/O error may have been due to temporary
+	 * failures.
+	 * Clear page error before actual read, PG_error will be
+	 * set again if read page fails.
+	 */
+	ClearPageError(page);
 	goto filler;
 
 out:
-- 
2.25.1

[PATCH AUTOSEL 4.9 63/90] mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area

[Sasha Levin]

From: Jaewon Kim <jaewon31.kim@samsung.com>

[ Upstream commit 09ef5283fd96ac424ef0e569626f359bf9ab86c9 ]

On passing requirement to vm_unmapped_area, arch_get_unmapped_area and
arch_get_unmapped_area_topdown did not set align_offset.  Internally on
both unmapped_area and unmapped_area_topdown, if info->align_mask is 0,
then info->align_offset was meaningless.

But commit df529cabb7a2 ("mm: mmap: add trace point of
vm_unmapped_area") always prints info->align_offset even though it is
uninitialized.

Fix this uninitialized value issue by setting it to 0 explicitly.

Before:
  vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022

After:
  vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0

Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200409094035.19457-1-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/mmap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/mmap.c b/mm/mmap.c
index 7109f886e739e..7c8815636c482 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2028,6 +2028,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
 	info.align_mask = 0;
+	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 #endif
@@ -2069,6 +2070,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
 	info.high_limit = mm->mmap_base;
 	info.align_mask = 0;
+	info.align_offset = 0;
 	addr = vm_unmapped_area(&info);
 
 	/*
-- 
2.25.1

[PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup

[Sasha Levin]

From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>

[ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]

On some platforms, the log is corrupted while console is being
registered. It is observed that when set_termios is called, there
are still some bytes in the FIFO to be transmitted.

So, wait for tx_empty inside cdns_uart_console_setup before calling
set_termios.

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/xilinx_uartps.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index eb61a07fcbbc3..07ea71a611678 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1268,6 +1268,7 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
+	unsigned long time_out;
 
 	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
 		return -EINVAL;
@@ -1281,6 +1282,13 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
+	/* Wait for tx_empty before setting up the console */
+	time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
+
+	while (time_before(jiffies, time_out) &&
+	       cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+		cpu_relax();
+
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 65/90] KVM: Remove CREATE_IRQCHIP/SET_PIT2 race

[Sasha Levin]

From: Steve Rutherford <srutherford@google.com>

[ Upstream commit 7289fdb5dcdbc5155b5531529c44105868a762f2 ]

Fixes a NULL pointer dereference, caused by the PIT firing an interrupt
before the interrupt table has been initialized.

SET_PIT2 can race with the creation of the IRQchip. In particular,
if SET_PIT2 is called with a low PIT timer period (after the creation of
the IOAPIC, but before the instantiation of the irq routes), the PIT can
fire an interrupt at an uninitialized table.

Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416191152.259434-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/x86.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6b7faa14c27bb..3c0f9be107e42 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4263,10 +4263,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof u.ps))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -4286,10 +4289,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {
-- 
2.25.1

[PATCH AUTOSEL 4.9 66/90] bdev: Reduce time holding bd_mutex in sync in blkdev_close()

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit b849dd84b6ccfe32622988b79b7b073861fcf9f7 ]

While trying to "dd" to the block device for a USB stick, I
encountered a hung task warning (blocked for > 120 seconds).  I
managed to come up with an easy way to reproduce this on my system
(where /dev/sdb is the block device for my USB stick) with:

  while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done

With my reproduction here are the relevant bits from the hung task
detector:

 INFO: task udevd:294 blocked for more than 122 seconds.
 ...
 udevd           D    0   294      1 0x00400008
 Call trace:
  ...
  mutex_lock_nested+0x40/0x50
  __blkdev_get+0x7c/0x3d4
  blkdev_get+0x118/0x138
  blkdev_open+0x94/0xa8
  do_dentry_open+0x268/0x3a0
  vfs_open+0x34/0x40
  path_openat+0x39c/0xdf4
  do_filp_open+0x90/0x10c
  do_sys_open+0x150/0x3c8
  ...

 ...
 Showing all locks held in the system:
 ...
 1 lock held by dd/2798:
  #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204
 ...
 dd              D    0  2798   2764 0x00400208
 Call trace:
  ...
  schedule+0x8c/0xbc
  io_schedule+0x1c/0x40
  wait_on_page_bit_common+0x238/0x338
  __lock_page+0x5c/0x68
  write_cache_pages+0x194/0x500
  generic_writepages+0x64/0xa4
  blkdev_writepages+0x24/0x30
  do_writepages+0x48/0xa8
  __filemap_fdatawrite_range+0xac/0xd8
  filemap_write_and_wait+0x30/0x84
  __blkdev_put+0x88/0x204
  blkdev_put+0xc4/0xe4
  blkdev_close+0x28/0x38
  __fput+0xe0/0x238
  ____fput+0x1c/0x28
  task_work_run+0xb0/0xe4
  do_notify_resume+0xfc0/0x14bc
  work_pending+0x8/0x14

The problem appears related to the fact that my USB disk is terribly
slow and that I have a lot of RAM in my system to cache things.
Specifically my writes seem to be happening at ~15 MB/s and I've got
~4 GB of RAM in my system that can be used for buffering.  To write 4
GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds.

The 267 second number is a problem because in __blkdev_put() we call
sync_blockdev() while holding the bd_mutex.  Any other callers who
want the bd_mutex will be blocked for the whole time.

The problem is made worse because I believe blkdev_put() specifically
tells other tasks (namely udev) to go try to access the device at right
around the same time we're going to hold the mutex for a long time.

Putting some traces around this (after disabling the hung task detector),
I could confirm:
 dd:    437.608600: __blkdev_put() right before sync_blockdev() for sdb
 udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb
 dd:    661.468451: __blkdev_put() right after sync_blockdev() for sdb
 udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb

A simple fix for this is to realize that sync_blockdev() works fine if
you're not holding the mutex.  Also, it's not the end of the world if
you sync a little early (though it can have performance impacts).
Thus we can make a guess that we're going to need to do the sync and
then do it without holding the mutex.  We still do one last sync with
the mutex but it should be much, much faster.

With this, my hung task warnings for my test case are gone.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/block_dev.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/block_dev.c b/fs/block_dev.c
index 06f7cbe201326..98b37e77683d3 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1586,6 +1586,16 @@ static void __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
 	struct gendisk *disk = bdev->bd_disk;
 	struct block_device *victim = NULL;
 
+	/*
+	 * Sync early if it looks like we're the last one.  If someone else
+	 * opens the block device between now and the decrement of bd_openers
+	 * then we did a sync that we didn't need to, but that's not the end
+	 * of the world and we want to avoid long (could be several minute)
+	 * syncs while holding the mutex.
+	 */
+	if (bdev->bd_openers == 1)
+		sync_blockdev(bdev);
+
 	mutex_lock_nested(&bdev->bd_mutex, for_part);
 	if (for_part)
 		bdev->bd_part_count--;
-- 
2.25.1

[PATCH AUTOSEL 4.9 67/90] drivers: char: tlclk.c: Avoid data race between init and interrupt handler

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 44b8fb6eaa7c3fb770bf1e37619cdb3902cca1fc ]

After registering character device the file operation callbacks can be
called. The open callback registers interrupt handler.
Therefore interrupt handler can execute in parallel with rest of the init
function. To avoid such data race initialize telclk_interrupt variable
and struct alarm_events before registering character device.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200417153451.1551-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/tlclk.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 100cd1de9939d..59e1e94d12c01 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -777,17 +777,21 @@ static int __init tlclk_init(void)
 {
 	int ret;
 
+	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+	if (!alarm_events) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
 	ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
 	if (ret < 0) {
 		printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
+		kfree(alarm_events);
 		return ret;
 	}
 	tlclk_major = ret;
-	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
-	if (!alarm_events) {
-		ret = -ENOMEM;
-		goto out1;
-	}
 
 	/* Read telecom clock IRQ number (Set by BIOS) */
 	if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
@@ -796,7 +800,6 @@ static int __init tlclk_init(void)
 		ret = -EBUSY;
 		goto out2;
 	}
-	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
 		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
@@ -837,8 +840,8 @@ out3:
 	release_region(TLCLK_BASE, 8);
 out2:
 	kfree(alarm_events);
-out1:
 	unregister_chrdev(tlclk_major, "telco_clock");
+out1:
 	return ret;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 68/90] dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 8c149b7d75e53be47648742f40fc90d9fc6fa63a ]

The required supplies in bindings were actually not matching
implementation making the bindings incorrect and misleading.  The Linux
kernel driver requires all supplies to be present.  Also for wlf,wm8994
uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>).

Reported-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200501133534.6706-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/sound/wm8994.txt       | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
index 68c4e8d96bed6..b309de00cd836 100644
--- a/Documentation/devicetree/bindings/sound/wm8994.txt
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -68,11 +74,11 @@ codec: wm8994@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
-- 
2.25.1

[PATCH AUTOSEL 4.9 69/90] atm: fix a memory leak of vcc->user_back

[Sasha Levin]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 8d9f73c0ad2f20e9fed5380de0a3097825859d03 ]

In lec_arp_clear_vccs() only entry->vcc is freed, but vcc
could be installed on entry->recv_vcc too in lec_vcc_added().

This fixes the following memory leak:

unreferenced object 0xffff8880d9266b90 (size 16):
  comm "atm2", pid 425, jiffies 4294907980 (age 23.488s)
  hex dump (first 16 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5  ............kkk.
  backtrace:
    [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151
    [<(____ptrval____)>] lane_ioctl+0x4b3/0x569
    [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236
    [<(____ptrval____)>] svc_ioctl+0x17d/0x198
    [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f
    [<(____ptrval____)>] sock_ioctl+0x2f9/0x322
    [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b
    [<(____ptrval____)>] ksys_ioctl+0x61/0x80
    [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19
    [<(____ptrval____)>] do_syscall_64+0x57/0x65
    [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

Cc: Gengming Liu <l.dmxcsnsbh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/atm/lec.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/atm/lec.c b/net/atm/lec.c
index 704892d79bf19..756429c95e859 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -1290,6 +1290,12 @@ static void lec_arp_clear_vccs(struct lec_arp_table *entry)
 		entry->vcc = NULL;
 	}
 	if (entry->recv_vcc) {
+		struct atm_vcc *vcc = entry->recv_vcc;
+		struct lec_vcc_priv *vpriv = LEC_VCC_PRIV(vcc);
+
+		kfree(vpriv);
+		vcc->user_back = NULL;
+
 		entry->recv_vcc->push = entry->old_recv_push;
 		vcc_release_async(entry->recv_vcc, -EPIPE);
 		entry->recv_vcc = NULL;
-- 
2.25.1

[PATCH AUTOSEL 4.9 70/90] phy: samsung: s5pv210-usb2: Add delay after reset

[Sasha Levin]

From: Jonathan Bakker <xc-racer2@live.ca>

[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ]

The USB phy takes some time to reset, so make sure we give it to it. The
delay length was taken from the 4x12 phy driver.

This manifested in issues with the DWC2 driver since commit fe369e1826b3
("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.")
where the endianness check would read the DWC ID as 0 due to the phy still
resetting, resulting in the wrong endian mode being chosen.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/BN6PR04MB06605D52502816E500683553A3D10@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/phy-s5pv210-usb2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/phy-s5pv210-usb2.c
index 004d320767e4d..bb36cfd4e3e90 100644
--- a/drivers/phy/phy-s5pv210-usb2.c
+++ b/drivers/phy/phy-s5pv210-usb2.c
@@ -142,6 +142,10 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		udelay(10);
 		rst &= ~rstbits;
 		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+		/* The following delay is necessary for the reset sequence to be
+		 * completed
+		 */
+		udelay(80);
 	} else {
 		pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
 		pwr |= phypwr;
-- 
2.25.1

[PATCH AUTOSEL 4.9 71/90] Bluetooth: Handle Inquiry Cancel error after Inquiry Complete

[Sasha Levin]

From: Sonny Sasaka <sonnysasaka@chromium.org>

[ Upstream commit adf1d6926444029396861413aba8a0f2a805742a ]

After sending Inquiry Cancel command to the controller, it is possible
that Inquiry Complete event comes before Inquiry Cancel command complete
event. In this case the Inquiry Cancel command will have status of
Command Disallowed since there is no Inquiry session to be cancelled.
This case should not be treated as error, otherwise we can reach an
inconsistent state.

Example of a btmon trace when this happened:

< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Inquiry Complete (0x01) plen 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      Inquiry Cancel (0x01|0x0002) ncmd 1
        Status: Command Disallowed (0x0c)

Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 700a2eb161490..d6da119f5082e 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -41,12 +41,27 @@
 
 /* Handle HCI Event packets */
 
-static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
+static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb,
+				  u8 *new_status)
 {
 	__u8 status = *((__u8 *) skb->data);
 
 	BT_DBG("%s status 0x%2.2x", hdev->name, status);
 
+	/* It is possible that we receive Inquiry Complete event right
+	 * before we receive Inquiry Cancel Command Complete event, in
+	 * which case the latter event should have status of Command
+	 * Disallowed (0x0c). This should not be treated as error, since
+	 * we actually achieve what Inquiry Cancel wants to achieve,
+	 * which is to end the last Inquiry session.
+	 */
+	if (status == 0x0c && !test_bit(HCI_INQUIRY, &hdev->flags)) {
+		bt_dev_warn(hdev, "Ignoring error of Inquiry Cancel command");
+		status = 0x00;
+	}
+
+	*new_status = status;
+
 	if (status)
 		return;
 
@@ -2772,7 +2787,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 
 	switch (*opcode) {
 	case HCI_OP_INQUIRY_CANCEL:
-		hci_cc_inquiry_cancel(hdev, skb);
+		hci_cc_inquiry_cancel(hdev, skb, status);
 		break;
 
 	case HCI_OP_PERIODIC_INQ:
-- 
2.25.1

[PATCH AUTOSEL 4.9 72/90] USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

[Sasha Levin]

From: Tang Bin <tangbin@cmss.chinamobile.com>

[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ]

If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-mv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 849806a75f1ce..273736e1d33fa 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -197,9 +197,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->regs = ehci_mv->op_regs;
 
 	hcd->irq = platform_get_irq(pdev, 0);
-	if (!hcd->irq) {
-		dev_err(&pdev->dev, "Cannot get irq.");
-		retval = -ENODEV;
+	if (hcd->irq < 0) {
+		retval = hcd->irq;
 		goto err_disable_clk;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 73/90] tty: serial: samsung: Correct clock selection logic

[Sasha Levin]

From: Jonathan Bakker <xc-racer2@live.ca>

[ Upstream commit 7d31676a8d91dd18e08853efd1cb26961a38c6a6 ]

Some variants of the samsung tty driver can pick which clock
to use for their baud rate generation.  In the DT conversion,
a default clock was selected to be used if a specific one wasn't
assigned and then a comparison of which clock rate worked better
was done.  Unfortunately, the comparison was implemented in such
a way that only the default clock was ever actually compared.
Fix this by iterating through all possible clocks, except when a
specific clock has already been picked via clk_sel (which is
only possible via board files).

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/BN6PR04MB06604E63833EA41837EBF77BA3A30@BN6PR04MB0660.namprd04.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/samsung.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 4dfdb59061bea..8c89697c53573 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1157,14 +1157,14 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 	struct s3c24xx_uart_info *info = ourport->info;
 	struct clk *clk;
 	unsigned long rate;
-	unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+	unsigned int cnt, baud, quot, best_quot = 0;
 	char clkname[MAX_CLK_NAME_LENGTH];
 	int calc_deviation, deviation = (1 << 30) - 1;
 
-	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
-			ourport->info->def_clk_sel;
 	for (cnt = 0; cnt < info->num_clks; cnt++) {
-		if (!(clk_sel & (1 << cnt)))
+		/* Keep selected clock if provided */
+		if (ourport->cfg->clk_sel &&
+			!(ourport->cfg->clk_sel & (1 << cnt)))
 			continue;
 
 		sprintf(clkname, "clk_uart_baud%d", cnt);
-- 
2.25.1

[PATCH AUTOSEL 4.9 74/90] ALSA: hda: Fix potential race in unsol event handler

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c637fa151259c0f74665fde7cba5b7eac1417ae5 ]

The unsol event handling code has a loop retrieving the read/write
indices and the arrays without locking while the append to the array
may happen concurrently.  This may lead to some inconsistency.
Although there hasn't been any proof of this bad results, it's still
safer to protect the racy accesses.

This patch adds the spinlock protection around the unsol handling loop
for addressing it.  Here we take bus->reg_lock as the writer side
snd_hdac_bus_queue_event() is also protected by that lock.

Link: https://lore.kernel.org/r/20200516062556.30951-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_bus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c
index 0e81ea89a5965..e3f68a76d90eb 100644
--- a/sound/hda/hdac_bus.c
+++ b/sound/hda/hdac_bus.c
@@ -155,6 +155,7 @@ static void process_unsol_events(struct work_struct *work)
 	struct hdac_driver *drv;
 	unsigned int rp, caddr, res;
 
+	spin_lock_irq(&bus->reg_lock);
 	while (bus->unsol_rp != bus->unsol_wp) {
 		rp = (bus->unsol_rp + 1) % HDA_UNSOL_QUEUE_SIZE;
 		bus->unsol_rp = rp;
@@ -166,10 +167,13 @@ static void process_unsol_events(struct work_struct *work)
 		codec = bus->caddr_tbl[caddr & 0x0f];
 		if (!codec || !codec->dev.driver)
 			continue;
+		spin_unlock_irq(&bus->reg_lock);
 		drv = drv_to_hdac_driver(codec->dev.driver);
 		if (drv->unsol_event)
 			drv->unsol_event(codec, res);
+		spin_lock_irq(&bus->reg_lock);
 	}
+	spin_unlock_irq(&bus->reg_lock);
 }
 
 /**
-- 
2.25.1

[PATCH AUTOSEL 4.9 75/90] fuse: don't check refcount after stealing page

[Sasha Levin]

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit 32f98877c57bee6bc27f443a96f49678a2cd6a50 ]

page_count() is unstable.  Unless there has been an RCU grace period
between when the page was removed from the page cache and now, a
speculative reference may exist from the page cache.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/dev.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index b99225e117120..f0129c033bd66 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -825,7 +825,6 @@ static int fuse_check_page(struct page *page)
 {
 	if (page_mapcount(page) ||
 	    page->mapping != NULL ||
-	    page_count(page) != 1 ||
 	    (page->flags & PAGE_FLAGS_CHECK_AT_PREP &
 	     ~(1 << PG_locked |
 	       1 << PG_referenced |
-- 
2.25.1

[PATCH AUTOSEL 4.9 76/90] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ]

The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int.  Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-mv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 273736e1d33fa..b29610899c9f6 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -196,11 +196,10 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(r);
 	hcd->regs = ehci_mv->op_regs;
 
-	hcd->irq = platform_get_irq(pdev, 0);
-	if (hcd->irq < 0) {
-		retval = hcd->irq;
+	retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
 		goto err_disable_clk;
-	}
+	hcd->irq = retval;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
-- 
2.25.1

[PATCH AUTOSEL 4.9 77/90] e1000: Do not perform reset in reset_task if we are already down

[Sasha Levin]

From: Alexander Duyck <alexander.h.duyck@linux.intel.com>

[ Upstream commit 49ee3c2ab5234757bfb56a0b3a3cb422f427e3a3 ]

We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking
over the kernel function trace of the system it appears that the interface
is being closed and then a reset is hitting which deadlocks the interface
as the NAPI interface is already disabled.

To prevent this from happening I am disabling the reset task when
__E1000_DOWN is already set. In addition code has been added so that we set
the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in
order to guarantee that the reset task will not run after we have started
the close call.

Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 3b16ee0de246e..c30792b761ee3 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -568,8 +568,13 @@ void e1000_reinit_locked(struct e1000_adapter *adapter)
 	WARN_ON(in_interrupt());
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
-	e1000_down(adapter);
-	e1000_up(adapter);
+
+	/* only run the task if not already down */
+	if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+		e1000_down(adapter);
+		e1000_up(adapter);
+	}
+
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
@@ -1456,10 +1461,15 @@ int e1000_close(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	int count = E1000_CHECK_RESET_COUNT;
 
-	while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags) && count--)
 		usleep_range(10000, 20000);
 
-	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+	WARN_ON(count < 0);
+
+	/* signal that we're down so that the reset task will no longer run */
+	set_bit(__E1000_DOWN, &adapter->flags);
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+
 	e1000_down(adapter);
 	e1000_power_down_phy(adapter);
 	e1000_free_irq(adapter);
-- 
2.25.1

[PATCH AUTOSEL 4.9 78/90] printk: handle blank console arguments passed in.

[Sasha Levin]

From: Shreyas Joshi <shreyas.joshi@biamp.com>

[ Upstream commit 48021f98130880dd74286459a1ef48b5e9bc374f ]

If uboot passes a blank string to console_setup then it results in
a trashed memory. Ultimately, the kernel crashes during freeing up
the memory.

This fix checks if there is a blank parameter being
passed to console_setup from uboot. In case it detects that
the console parameter is blank then it doesn't setup the serial
device and it gracefully exits.

Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com
Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index c1873d325ebda..7acae2f2478d9 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2035,6 +2035,9 @@ static int __init console_setup(char *str)
 	char *s, *options, *brl_options = NULL;
 	int idx;
 
+	if (str[0] == 0)
+		return 1;
+
 	if (_braille_console_setup(&str, &brl_options))
 		return 1;
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 79/90] btrfs: don't force read-only after error in drop snapshot

[Sasha Levin]

From: David Sterba <dsterba@suse.com>

[ Upstream commit 7c09c03091ac562ddca2b393e5d65c1d37da79f1 ]

Deleting a subvolume on a full filesystem leads to ENOSPC followed by a
forced read-only. This is not a transaction abort and the filesystem is
otherwise ok, so the error should be just propagated to the callers.

This is caused by unnecessary call to btrfs_handle_fs_error for all
errors, except EAGAIN. This does not make sense as the standard
transaction abort mechanism is in btrfs_drop_snapshot so all relevant
failures are handled.

Originally in commit cb1b69f4508a ("Btrfs: forced readonly when
btrfs_drop_snapshot() fails") there was no return value at all, so the
btrfs_std_error made some sense but once the error handling and
propagation has been implemented we don't need it anymore.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/extent-tree.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index c0033a0d00787..b5bff1e760a34 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -9435,8 +9435,6 @@ out:
 	 */
 	if (!for_reloc && root_dropped == false)
 		btrfs_add_dead_root(root);
-	if (err && err != -EAGAIN)
-		btrfs_handle_fs_error(fs_info, err, NULL);
 	return err;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 80/90] vfio/pci: fix memory leaks of eventfd ctx

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 1518ac272e789cae8c555d69951b032a275b7602 ]

Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few
memory leaks after a while because vfio_pci_set_ctx_trigger_single()
calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later.
Fix it by calling eventfd_ctx_put() for those memory in
vfio_pci_release() before vfio_device_release().

unreferenced object 0xebff008981cc2b00 (size 128):
  comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s)
  hex dump (first 32 bytes):
    01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de  ....kkkk.....N..
    ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
  backtrace:
    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180
unreferenced object 0x29ff008981cc4180 (size 128):
  comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s)
  hex dump (first 32 bytes):
    01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de  ....kkkk.....N..
    ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
  backtrace:
    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 2254c281cc766..c9c0af9a571f6 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -392,6 +392,10 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		if (vdev->err_trigger)
+			eventfd_ctx_put(vdev->err_trigger);
+		if (vdev->req_trigger)
+			eventfd_ctx_put(vdev->req_trigger);
 	}
 
 	mutex_unlock(&driver_lock);
-- 
2.25.1

[PATCH AUTOSEL 4.9 81/90] perf util: Fix memory leak of prefix_if_not_in

[Sasha Levin]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 07e9a6f538cbeecaf5c55b6f2991416f873cdcbd ]

Need to free "str" before return when asprintf() failed to avoid memory
leak.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/sort.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 031e64ce71564..013e3f5102258 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -2532,7 +2532,7 @@ static char *prefix_if_not_in(const char *pre, char *str)
 		return str;
 
 	if (asprintf(&n, "%s,%s", pre, str) < 0)
-		return NULL;
+		n = NULL;
 
 	free(str);
 	return n;
-- 
2.25.1

[PATCH AUTOSEL 4.9 82/90] perf kcore_copy: Fix module map when there are no modules loaded

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 61f82e3fb697a8e85f22fdec786528af73dc36d1 ]

In the absence of any modules, no "modules" map is created, but there
are other executable pages to map, due to eBPF JIT, kprobe or ftrace.
Map them by recognizing that the first "module" symbol is not
necessarily from a module, and adjust the map accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/symbol-elf.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 5a50326c8158f..e155783c601ab 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -1421,6 +1421,7 @@ struct kcore_copy_info {
 	u64 first_symbol;
 	u64 last_symbol;
 	u64 first_module;
+	u64 first_module_symbol;
 	u64 last_module_symbol;
 	struct phdr_data kernel_map;
 	struct phdr_data modules_map;
@@ -1435,6 +1436,8 @@ static int kcore_copy__process_kallsyms(void *arg, const char *name, char type,
 		return 0;
 
 	if (strchr(name, '[')) {
+		if (!kci->first_module_symbol || start < kci->first_module_symbol)
+			kci->first_module_symbol = start;
 		if (start > kci->last_module_symbol)
 			kci->last_module_symbol = start;
 		return 0;
@@ -1559,6 +1562,10 @@ static int kcore_copy__calc_maps(struct kcore_copy_info *kci, const char *dir,
 		kci->etext += page_size;
 	}
 
+	if (kci->first_module_symbol &&
+	    (!kci->first_module || kci->first_module_symbol < kci->first_module))
+		kci->first_module = kci->first_module_symbol;
+
 	kci->first_module = round_down(kci->first_module, page_size);
 
 	if (kci->last_module_symbol) {
-- 
2.25.1

[PATCH AUTOSEL 4.9 83/90] mtd: rawnand: omap_elm: Fix runtime PM imbalance on error

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 37f7212148cf1d796135cdf8d0c7fee13067674b ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522104008.28340-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/omap_elm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index a3f32f939cc17..6736777a41567 100644
--- a/drivers/mtd/nand/omap_elm.c
+++ b/drivers/mtd/nand/omap_elm.c
@@ -421,6 +421,7 @@ static int elm_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	if (pm_runtime_get_sync(&pdev->dev) < 0) {
 		ret = -EINVAL;
+		pm_runtime_put_sync(&pdev->dev);
 		pm_runtime_disable(&pdev->dev);
 		dev_err(&pdev->dev, "can't enable clock\n");
 		return ret;
-- 
2.25.1

[PATCH AUTOSEL 4.9 84/90] ceph: fix potential race in ceph_check_caps

[Sasha Levin]

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit dc3da0461cc4b76f2d0c5b12247fcb3b520edbbf ]

Nothing ensures that session will still be valid by the time we
dereference the pointer. Take and put a reference.

In principle, we should always be able to get a reference here, but
throw a warning if that's ever not the case.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/caps.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index e11aacb35d6b5..cbd92dd89de16 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1807,12 +1807,24 @@ ack:
 			if (mutex_trylock(&session->s_mutex) == 0) {
 				dout("inverting session/ino locks on %p\n",
 				     session);
+				session = ceph_get_mds_session(session);
 				spin_unlock(&ci->i_ceph_lock);
 				if (took_snap_rwsem) {
 					up_read(&mdsc->snap_rwsem);
 					took_snap_rwsem = 0;
 				}
-				mutex_lock(&session->s_mutex);
+				if (session) {
+					mutex_lock(&session->s_mutex);
+					ceph_put_mds_session(session);
+				} else {
+					/*
+					 * Because we take the reference while
+					 * holding the i_ceph_lock, it should
+					 * never be NULL. Throw a warning if it
+					 * ever is.
+					 */
+					WARN_ON_ONCE(true);
+				}
 				goto retry;
 			}
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.9 85/90] mtd: parser: cmdline: Support MTD names containing one or more colons

[Sasha Levin]

From: Boris Brezillon <boris.brezillon@collabora.com>

[ Upstream commit eb13fa0227417e84aecc3bd9c029d376e33474d3 ]

Looks like some drivers define MTD names with a colon in it, thus
making mtdpart= parsing impossible. Let's fix the parser to gracefully
handle that case: the last ':' in a partition definition sequence is
considered instead of the first one.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ron Minnich <rminnich@google.com>
Tested-by: Ron Minnich <rminnich@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/cmdlinepart.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index fbd5affc0acfe..04fd845de05fb 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -228,12 +228,29 @@ static int mtdpart_setup_real(char *s)
 		struct cmdline_mtd_partition *this_mtd;
 		struct mtd_partition *parts;
 		int mtd_id_len, num_parts;
-		char *p, *mtd_id;
+		char *p, *mtd_id, *semicol;
+
+		/*
+		 * Replace the first ';' by a NULL char so strrchr can work
+		 * properly.
+		 */
+		semicol = strchr(s, ';');
+		if (semicol)
+			*semicol = '\0';
 
 		mtd_id = s;
 
-		/* fetch <mtd-id> */
-		p = strchr(s, ':');
+		/*
+		 * fetch <mtd-id>. We use strrchr to ignore all ':' that could
+		 * be present in the MTD name, only the last one is interpreted
+		 * as an <mtd-id>/<part-definition> separator.
+		 */
+		p = strrchr(s, ':');
+
+		/* Restore the ';' now. */
+		if (semicol)
+			*semicol = ';';
+
 		if (!p) {
 			pr_err("no mtd-id\n");
 			return -EINVAL;
-- 
2.25.1

[PATCH AUTOSEL 4.9 86/90] x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit a7ef9ba986b5fae9d80f8a7b31db0423687efe4e ]

Prevent the compiler from uninlining and creating traceable/probable
functions as this is invoked _after_ context tracking switched to
CONTEXT_USER and rcu idle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134340.902709267@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/nospec-branch.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 4af16acc001a3..204a5ce65afda 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -321,7 +321,7 @@ DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
  * combination with microcode which triggers a CPU buffer flush when the
  * instruction is executed.
  */
-static inline void mds_clear_cpu_buffers(void)
+static __always_inline void mds_clear_cpu_buffers(void)
 {
 	static const u16 ds = __KERNEL_DS;
 
@@ -342,7 +342,7 @@ static inline void mds_clear_cpu_buffers(void)
  *
  * Clear CPU buffers if the corresponding static key is enabled
  */
-static inline void mds_user_clear_cpu_buffers(void)
+static __always_inline void mds_user_clear_cpu_buffers(void)
 {
 	if (static_branch_likely(&mds_user_clear))
 		mds_clear_cpu_buffers();
-- 
2.25.1

[PATCH AUTOSEL 4.9 87/90] vfio/pci: Clear error and request eventfd ctx after releasing

[Sasha Levin]

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 5c5866c593bbd444d0339ede6a8fb5f14ff66d72 ]

The next use of the device will generate an underflow from the
stale reference.

Cc: Qian Cai <cai@lca.pw>
Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
Reported-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index c9c0af9a571f6..c08cff0ca08df 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -392,10 +392,14 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
-		if (vdev->err_trigger)
+		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
-		if (vdev->req_trigger)
+			vdev->err_trigger = NULL;
+		}
+		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
+			vdev->req_trigger = NULL;
+		}
 	}
 
 	mutex_unlock(&driver_lock);
-- 
2.25.1

[PATCH AUTOSEL 4.9 88/90] cifs: Fix double add page to memcg when cifs_readpages

[Sasha Levin]

From: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>

[ Upstream commit 95a3d8f3af9b0d63b43f221b630beaab9739d13a ]

When xfstests generic/451, there is an BUG at mm/memcontrol.c:
  page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea
       index:0xf
  mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451"
  flags: 0x2fffff80000001(locked)
  raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210
  raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000
  page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup)
  page->mem_cgroup:ffff88817287d000
  ------------[ cut here ]------------
  kernel BUG at mm/memcontrol.c:2659!
  invalid opcode: 0000 [#1] SMP
  CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_
    073836-buildvm-ppc64le-16.ppc.4
  RIP: 0010:commit_charge+0x35/0x50
  Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7
        c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9
  RSP: 0018:ffffc90002023a50 EFLAGS: 00010202
  RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0
  RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005
  R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000
  R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0
  FS:  00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   mem_cgroup_charge+0x166/0x4f0
   __add_to_page_cache_locked+0x4a9/0x710
   add_to_page_cache_locked+0x15/0x20
   cifs_readpages+0x217/0x1270
   read_pages+0x29a/0x670
   page_cache_readahead_unbounded+0x24f/0x390
   __do_page_cache_readahead+0x3f/0x60
   ondemand_readahead+0x1f1/0x470
   page_cache_async_readahead+0x14c/0x170
   generic_file_buffered_read+0x5df/0x1100
   generic_file_read_iter+0x10c/0x1d0
   cifs_strict_readv+0x139/0x170
   new_sync_read+0x164/0x250
   __vfs_read+0x39/0x60
   vfs_read+0xb5/0x1e0
   ksys_pread64+0x85/0xf0
   __x64_sys_pread64+0x22/0x30
   do_syscall_64+0x69/0x150
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5071fcb1af
  Code: Bad RIP value.
  RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
  RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af
  RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001
  R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000
  Modules linked in:
  ---[ end trace 725fa14a3e1af65c ]---

Since commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new
mem_cgroup_charge() API") not cancel the page charge, the pages maybe
double add to pagecache:
thread1                       | thread2
cifs_readpages
readpages_get_pages
 add_to_page_cache_locked(head,index=n)=0
                              | readpages_get_pages
                              | add_to_page_cache_locked(head,index=n+1)=0
 add_to_page_cache_locked(head, index=n+1)=-EEXIST
 then, will next loop with list head page's
 index=n+1 and the page->mapping not NULL
readpages_get_pages
add_to_page_cache_locked(head, index=n+1)
 commit_charge
  VM_BUG_ON_PAGE

So, we should not do the next loop when any page add to page cache
failed.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index dca78b6e9ea32..24508b69e78b7 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -3531,7 +3531,8 @@ readpages_get_pages(struct address_space *mapping, struct list_head *page_list,
 			break;
 
 		__SetPageLocked(page);
-		if (add_to_page_cache_locked(page, mapping, page->index, gfp)) {
+		rc = add_to_page_cache_locked(page, mapping, page->index, gfp);
+		if (rc) {
 			__ClearPageLocked(page);
 			break;
 		}
@@ -3547,6 +3548,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	struct list_head *page_list, unsigned num_pages)
 {
 	int rc;
+	int err = 0;
 	struct list_head tmplist;
 	struct cifsFileInfo *open_file = file->private_data;
 	struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file);
@@ -3587,7 +3589,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	 * the order of declining indexes. When we put the pages in
 	 * the rdata->pages, then we want them in increasing order.
 	 */
-	while (!list_empty(page_list)) {
+	while (!list_empty(page_list) && !err) {
 		unsigned int i, nr_pages, bytes, rsize;
 		loff_t offset;
 		struct page *page, *tpage;
@@ -3610,9 +3612,10 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 			return 0;
 		}
 
-		rc = readpages_get_pages(mapping, page_list, rsize, &tmplist,
+		nr_pages = 0;
+		err = readpages_get_pages(mapping, page_list, rsize, &tmplist,
 					 &nr_pages, &offset, &bytes);
-		if (rc) {
+		if (!nr_pages) {
 			add_credits_and_wake_if(server, credits, 0);
 			break;
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.9 89/90] selftests/x86/syscall_nt: Clear weird flags after each test

[Sasha Levin]

From: Andy Lutomirski <luto@kernel.org>

[ Upstream commit a61fa2799ef9bf6c4f54cf7295036577cececc72 ]

Clear the weird flags before logging to improve strace output --
logging results while, say, TF is set does no one any favors.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/x86/syscall_nt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/x86/syscall_nt.c b/tools/testing/selftests/x86/syscall_nt.c
index 43fcab367fb0a..74e6b3fc2d09e 100644
--- a/tools/testing/selftests/x86/syscall_nt.c
+++ b/tools/testing/selftests/x86/syscall_nt.c
@@ -67,6 +67,7 @@ static void do_it(unsigned long extraflags)
 	set_eflags(get_eflags() | extraflags);
 	syscall(SYS_getpid);
 	flags = get_eflags();
+	set_eflags(X86_EFLAGS_IF | X86_EFLAGS_FIXED);
 	if ((flags & extraflags) == extraflags) {
 		printf("[OK]\tThe syscall worked and flags are still set\n");
 	} else {
-- 
2.25.1

[PATCH AUTOSEL 4.9 90/90] vfio/pci: fix racy on error and request eventfd ctx

[Sasha Levin]

From: Zeng Tao <prime.zeng@hisilicon.com>

[ Upstream commit b872d0640840018669032b20b6375a478ed1f923 ]

The vfio_pci_release call will free and clear the error and request
eventfd ctx while these ctx could be in use at the same time in the
function like vfio_pci_request, and it's expected to protect them under
the vdev->igate mutex, which is missing in vfio_pci_release.

This issue is introduced since commit 1518ac272e78 ("vfio/pci: fix memory
leaks of eventfd ctx"),and since commit 5c5866c593bb ("vfio/pci: Clear
error and request eventfd ctx after releasing"), it's very easily to
trigger the kernel panic like this:

[ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 9513.913091] Mem abort info:
[ 9513.915871]   ESR = 0x96000006
[ 9513.918912]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 9513.924198]   SET = 0, FnV = 0
[ 9513.927238]   EA = 0, S1PTW = 0
[ 9513.930364] Data abort info:
[ 9513.933231]   ISV = 0, ISS = 0x00000006
[ 9513.937048]   CM = 0, WnR = 0
[ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000
[ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000
[ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci]
[ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G        W         5.8.0-rc4+ #3
[ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020
[ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88
[ 9513.999515] lr : eventfd_signal+0x6c/0x1b0
[ 9514.003591] sp : ffff800038a0b960
[ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10
[ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000
[ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400
[ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008
[ 9514.028033] x21: 0000000000000000 x20: 0000000000000000
[ 9514.033321] x19: 0000000000000008 x18: 0000000000000000
[ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328
[ 9514.043893] x15: 0000000000000000 x14: 0000000000000001
[ 9514.049179] x13: 0000000000000000 x12: 0000000000000002
[ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00
[ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60
[ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748
[ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000
[ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001
[ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000
[ 9514.086181] Call trace:
[ 9514.088618]  _raw_spin_lock_irqsave+0x48/0x88
[ 9514.092954]  eventfd_signal+0x6c/0x1b0
[ 9514.096691]  vfio_pci_request+0x84/0xd0 [vfio_pci]
[ 9514.101464]  vfio_del_group_dev+0x150/0x290 [vfio]
[ 9514.106234]  vfio_pci_remove+0x30/0x128 [vfio_pci]
[ 9514.111007]  pci_device_remove+0x48/0x108
[ 9514.115001]  device_release_driver_internal+0x100/0x1b8
[ 9514.120200]  device_release_driver+0x28/0x38
[ 9514.124452]  pci_stop_bus_device+0x68/0xa8
[ 9514.128528]  pci_stop_and_remove_bus_device+0x20/0x38
[ 9514.133557]  pci_iov_remove_virtfn+0xb4/0x128
[ 9514.137893]  sriov_disable+0x3c/0x108
[ 9514.141538]  pci_disable_sriov+0x28/0x38
[ 9514.145445]  hns3_pci_sriov_configure+0x48/0xb8 [hns3]
[ 9514.150558]  sriov_numvfs_store+0x110/0x198
[ 9514.154724]  dev_attr_store+0x44/0x60
[ 9514.158373]  sysfs_kf_write+0x5c/0x78
[ 9514.162018]  kernfs_fop_write+0x104/0x210
[ 9514.166010]  __vfs_write+0x48/0x90
[ 9514.169395]  vfs_write+0xbc/0x1c0
[ 9514.172694]  ksys_write+0x74/0x100
[ 9514.176079]  __arm64_sys_write+0x24/0x30
[ 9514.179987]  el0_svc_common.constprop.4+0x110/0x200
[ 9514.184842]  do_el0_svc+0x34/0x98
[ 9514.188144]  el0_svc+0x14/0x40
[ 9514.191185]  el0_sync_handler+0xb0/0x2d0
[ 9514.195088]  el0_sync+0x140/0x180
[ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61)
[ 9514.204455] ---[ end trace 648de00c8406465f ]---
[ 9514.212308] note: bash[1327] exited with preempt_count 1

Cc: Qian Cai <cai@lca.pw>
Cc: Alex Williamson <alex.williamson@redhat.com>
Fixes: 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index c08cff0ca08df..237d5aceb302d 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -392,14 +392,19 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		mutex_lock(&vdev->igate);
 		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
 			vdev->err_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
+
+		mutex_lock(&vdev->igate);
 		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
 			vdev->req_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
 	}
 
 	mutex_unlock(&driver_lock);
-- 
2.25.1

Re: [PATCH AUTOSEL 4.9 23/90] efi/arm: Defer probe of PCIe backed efifb on DT systems

[Ard Biesheuvel]

On Fri, 18 Sep 2020 at 05:15, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ard Biesheuvel <ardb@kernel.org>
>
> [ Upstream commit 64c8a0cd0a535891d5905c3a1651150f0f141439 ]
>
> The new of_devlink support breaks PCIe probing on ARM platforms booting
> via UEFI if the firmware exposes a EFI framebuffer that is backed by a
> PCI device. The reason is that the probing order gets reversed,
> resulting in a resource conflict on the framebuffer memory window when
> the PCIe probes last, causing it to give up entirely.
>
> Given that we rely on PCI quirks to deal with EFI framebuffers that get
> moved around in memory, we cannot simply drop the memory reservation, so
> instead, let's use the device link infrastructure to register this
> dependency, and force the probing to occur in the expected order.
>
> Co-developed-by: Saravana Kannan <saravanak@google.com>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Ingo Molnar <mingo@kernel.org>
> Link: https://lore.kernel.org/r/20200113172245.27925-9-ardb@kernel.org
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Same question as the previous time you proposed this patch for stable:
is the of_devlink framework being backported in its entirety? If not,
this patch does not belong in -stable.


> ---
>  drivers/firmware/efi/arm-init.c | 107 ++++++++++++++++++++++++++++++--
>  1 file changed, 103 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
> index 8ee91777abce7..e4ddd6e6edb31 100644
> --- a/drivers/firmware/efi/arm-init.c
> +++ b/drivers/firmware/efi/arm-init.c
> @@ -14,10 +14,12 @@
>  #define pr_fmt(fmt)    "efi: " fmt
>
>  #include <linux/efi.h>
> +#include <linux/fwnode.h>
>  #include <linux/init.h>
>  #include <linux/memblock.h>
>  #include <linux/mm_types.h>
>  #include <linux/of.h>
> +#include <linux/of_address.h>
>  #include <linux/of_fdt.h>
>  #include <linux/platform_device.h>
>  #include <linux/screen_info.h>
> @@ -262,15 +264,112 @@ void __init efi_init(void)
>                 efi_memmap_unmap();
>  }
>
> +static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
> +{
> +       u64 fb_base = screen_info.lfb_base;
> +
> +       if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
> +               fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
> +
> +       return fb_base >= range->cpu_addr &&
> +              fb_base < (range->cpu_addr + range->size);
> +}
> +
> +static struct device_node *find_pci_overlap_node(void)
> +{
> +       struct device_node *np;
> +
> +       for_each_node_by_type(np, "pci") {
> +               struct of_pci_range_parser parser;
> +               struct of_pci_range range;
> +               int err;
> +
> +               err = of_pci_range_parser_init(&parser, np);
> +               if (err) {
> +                       pr_warn("of_pci_range_parser_init() failed: %d\n", err);
> +                       continue;
> +               }
> +
> +               for_each_of_pci_range(&parser, &range)
> +                       if (efifb_overlaps_pci_range(&range))
> +                               return np;
> +       }
> +       return NULL;
> +}
> +
> +/*
> + * If the efifb framebuffer is backed by a PCI graphics controller, we have
> + * to ensure that this relation is expressed using a device link when
> + * running in DT mode, or the probe order may be reversed, resulting in a
> + * resource reservation conflict on the memory window that the efifb
> + * framebuffer steals from the PCIe host bridge.
> + */
> +static int efifb_add_links(const struct fwnode_handle *fwnode,
> +                          struct device *dev)
> +{
> +       struct device_node *sup_np;
> +       struct device *sup_dev;
> +
> +       sup_np = find_pci_overlap_node();
> +
> +       /*
> +        * If there's no PCI graphics controller backing the efifb, we are
> +        * done here.
> +        */
> +       if (!sup_np)
> +               return 0;
> +
> +       sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
> +       of_node_put(sup_np);
> +
> +       /*
> +        * Return -ENODEV if the PCI graphics controller device hasn't been
> +        * registered yet.  This ensures that efifb isn't allowed to probe
> +        * and this function is retried again when new devices are
> +        * registered.
> +        */
> +       if (!sup_dev)
> +               return -ENODEV;
> +
> +       /*
> +        * If this fails, retrying this function at a later point won't
> +        * change anything. So, don't return an error after this.
> +        */
> +       if (!device_link_add(dev, sup_dev, 0))
> +               dev_warn(dev, "device_link_add() failed\n");
> +
> +       put_device(sup_dev);
> +
> +       return 0;
> +}
> +
> +static const struct fwnode_operations efifb_fwnode_ops = {
> +       .add_links = efifb_add_links,
> +};
> +
> +static struct fwnode_handle efifb_fwnode = {
> +       .ops = &efifb_fwnode_ops,
> +};
> +
>  static int __init register_gop_device(void)
>  {
> -       void *pd;
> +       struct platform_device *pd;
> +       int err;
>
>         if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
>                 return 0;
>
> -       pd = platform_device_register_data(NULL, "efi-framebuffer", 0,
> -                                          &screen_info, sizeof(screen_info));
> -       return PTR_ERR_OR_ZERO(pd);
> +       pd = platform_device_alloc("efi-framebuffer", 0);
> +       if (!pd)
> +               return -ENOMEM;
> +
> +       if (IS_ENABLED(CONFIG_PCI))
> +               pd->dev.fwnode = &efifb_fwnode;
> +
> +       err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
> +       if (err)
> +               return err;
> +
> +       return platform_device_add(pd);
>  }
>  subsys_initcall(register_gop_device);
> --
> 2.25.1
>

Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup

[Naresh Kamboju]

On Fri, 18 Sep 2020 at 07:55, Sasha Levin <sashal@kernel.org> wrote:
>
> From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
>
> [ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]
>
> On some platforms, the log is corrupted while console is being
> registered. It is observed that when set_termios is called, there
> are still some bytes in the FIFO to be transmitted.
>
> So, wait for tx_empty inside cdns_uart_console_setup before calling
> set_termios.
>
> Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

stable rc 4.9 arm64 build broken.

drivers/tty/serial/xilinx_uartps.c: In function 'cdns_uart_console_setup':
drivers/tty/serial/xilinx_uartps.c:1286:40: error: 'TX_TIMEOUT'
undeclared (first use in this function); did you mean 'ETIMEDOUT'?
  time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
                                        ^~~~~~~~~~
                                        ETIMEDOUT
drivers/tty/serial/xilinx_uartps.c:1286:40: note: each undeclared
identifier is reported only once for each function it appears in
  CC      drivers/usb/core/port.o
scripts/Makefile.build:304: recipe for target
'drivers/tty/serial/xilinx_uartps.o' failed
make[5]: *** [drivers/tty/serial/xilinx_uartps.o] Error 1

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

full test log link,
https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=hikey,label=docker-lkft/996/consoleText


> ---
>  drivers/tty/serial/xilinx_uartps.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
> index eb61a07fcbbc3..07ea71a611678 100644
> --- a/drivers/tty/serial/xilinx_uartps.c
> +++ b/drivers/tty/serial/xilinx_uartps.c
> @@ -1268,6 +1268,7 @@ static int cdns_uart_console_setup(struct console *co, char *options)
>         int bits = 8;
>         int parity = 'n';
>         int flow = 'n';
> +       unsigned long time_out;
>
>         if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
>                 return -EINVAL;
> @@ -1281,6 +1282,13 @@ static int cdns_uart_console_setup(struct console *co, char *options)
>         if (options)
>                 uart_parse_options(options, &baud, &parity, &bits, &flow);
>
> +       /* Wait for tx_empty before setting up the console */
> +       time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
> +
> +       while (time_before(jiffies, time_out) &&
> +              cdns_uart_tx_empty(port) != TIOCSER_TEMT)
> +               cpu_relax();
> +
>         return uart_set_options(port, co, baud, parity, bits, flow);
>  }
>
> --
> 2.25.1
>


-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup

[Naresh Kamboju]

On Tue, 29 Sep 2020 at 01:41, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>
> On Fri, 18 Sep 2020 at 07:55, Sasha Levin <sashal@kernel.org> wrote:
> >
> > From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> >
> > [ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]
> >
> > On some platforms, the log is corrupted while console is being
> > registered. It is observed that when set_termios is called, there
> > are still some bytes in the FIFO to be transmitted.
> >
> > So, wait for tx_empty inside cdns_uart_console_setup before calling
> > set_termios.
> >
> > Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> > Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> > Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
>
> stable rc 4.9 arm64 build broken.

and stable rc 4.9 arm build broken.

>
> drivers/tty/serial/xilinx_uartps.c: In function 'cdns_uart_console_setup':
> drivers/tty/serial/xilinx_uartps.c:1286:40: error: 'TX_TIMEOUT'
> undeclared (first use in this function); did you mean 'ETIMEDOUT'?
>   time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
>                                         ^~~~~~~~~~
>                                         ETIMEDOUT
> drivers/tty/serial/xilinx_uartps.c:1286:40: note: each undeclared
> identifier is reported only once for each function it appears in
>   CC      drivers/usb/core/port.o
> scripts/Makefile.build:304: recipe for target
> 'drivers/tty/serial/xilinx_uartps.o' failed
> make[5]: *** [drivers/tty/serial/xilinx_uartps.o] Error 1
>
> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
>
> full test log link,
> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=hikey,label=docker-lkft/996/consoleText
>
>
> > ---
> >  drivers/tty/serial/xilinx_uartps.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
> > index eb61a07fcbbc3..07ea71a611678 100644
> > --- a/drivers/tty/serial/xilinx_uartps.c
> > +++ b/drivers/tty/serial/xilinx_uartps.c
> > @@ -1268,6 +1268,7 @@ static int cdns_uart_console_setup(struct console *co, char *options)
> >         int bits = 8;
> >         int parity = 'n';
> >         int flow = 'n';
> > +       unsigned long time_out;
> >
> >         if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
> >                 return -EINVAL;
> > @@ -1281,6 +1282,13 @@ static int cdns_uart_console_setup(struct console *co, char *options)
> >         if (options)
> >                 uart_parse_options(options, &baud, &parity, &bits, &flow);
> >
> > +       /* Wait for tx_empty before setting up the console */
> > +       time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
> > +
> > +       while (time_before(jiffies, time_out) &&
> > +              cdns_uart_tx_empty(port) != TIOCSER_TEMT)
> > +               cpu_relax();
> > +
> >         return uart_set_options(port, co, baud, parity, bits, flow);
> >  }
> >
> > --
> > 2.25.1
> >
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org

Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup

[Greg Kroah-Hartman]

On Tue, Sep 29, 2020 at 01:43:22AM +0530, Naresh Kamboju wrote:
> On Tue, 29 Sep 2020 at 01:41, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
> >
> > On Fri, 18 Sep 2020 at 07:55, Sasha Levin <sashal@kernel.org> wrote:
> > >
> > > From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> > >
> > > [ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]
> > >
> > > On some platforms, the log is corrupted while console is being
> > > registered. It is observed that when set_termios is called, there
> > > are still some bytes in the FIFO to be transmitted.
> > >
> > > So, wait for tx_empty inside cdns_uart_console_setup before calling
> > > set_termios.
> > >
> > > Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
> > > Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> > > Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > Signed-off-by: Sasha Levin <sashal@kernel.org>
> >
> > stable rc 4.9 arm64 build broken.
> 
> and stable rc 4.9 arm build broken.

Thanks, I've queued up the dependant patch, somehow Sasha's builders
must have missed this :)

greg k-h

Re: [PATCH AUTOSEL 4.9 64/90] serial: uartps: Wait for tx_empty in console setup

[Sasha Levin]

On Tue, Sep 29, 2020 at 08:59:02AM +0200, Greg Kroah-Hartman wrote:
>On Tue, Sep 29, 2020 at 01:43:22AM +0530, Naresh Kamboju wrote:
>> On Tue, 29 Sep 2020 at 01:41, Naresh Kamboju <naresh.kamboju@linaro.org> wrote:
>> >
>> > On Fri, 18 Sep 2020 at 07:55, Sasha Levin <sashal@kernel.org> wrote:
>> > >
>> > > From: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
>> > >
>> > > [ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]
>> > >
>> > > On some platforms, the log is corrupted while console is being
>> > > registered. It is observed that when set_termios is called, there
>> > > are still some bytes in the FIFO to be transmitted.
>> > >
>> > > So, wait for tx_empty inside cdns_uart_console_setup before calling
>> > > set_termios.
>> > >
>> > > Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
>> > > Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
>> > > Link: https://lore.kernel.org/r/1586413563-29125-2-git-send-email-raviteja.narayanam@xilinx.com
>> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> > > Signed-off-by: Sasha Levin <sashal@kernel.org>
>> >
>> > stable rc 4.9 arm64 build broken.
>>
>> and stable rc 4.9 arm build broken.
>
>Thanks, I've queued up the dependant patch, somehow Sasha's builders
>must have missed this :)

Because it doesn't fail here with an allmodconfig :(

sasha@sasha-builder:~/data/linux$ git checkout queue-4.9
HEAD is now at 77d58b1b4d54 kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
sasha@sasha-builder:~/data/linux$ make ARCH=arm64 CROSS_COMPILE="/home/sasha/x-tools/aarch64-unknown-linux-android/bin/aarch64-unknown-linux-android-" allmodconfig
scripts/kconfig/conf  --allmodconfig Kconfig
#
# configuration written to .config
#
sasha@sasha-builder:~/data/linux$ make ARCH=arm64 CROSS_COMPILE="/home/sasha/x-tools/aarch64-unknown-linux-gnu/bin/aarch64-unknown-linux-gnu-" drivers/tty/serial/xilinx_uartps.o
   CHK     include/config/kernel.release
   CHK     include/generated/uapi/linux/version.h
   CHK     include/generated/utsrelease.h
   CHK     include/generated/bounds.h
   CHK     include/generated/timeconst.h
   CHK     include/generated/asm-offsets.h
   CALL    scripts/checksyscalls.sh
   CHK     scripts/mod/devicetable-offsets.h
   CC [M]  drivers/tty/serial/xilinx_uartps.o

-- 
Thanks,
Sasha