linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Biju Das <biju.das.jz@bp.renesas.com>,
	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Subject: Re: [PATCH v6 1/3] media: i2c: ov772x: Parse endpoint properties
Date: Wed, 30 Sep 2020 12:30:37 +0200	[thread overview]
Message-ID: <20200930103037.putcmd7sjyaut6lr@uno.localdomain> (raw)
In-Reply-To: <20200917174224.11430-2-prabhakar.mahadev-lad.rj@bp.renesas.com>

Hi

On Thu, Sep 17, 2020 at 06:42:22PM +0100, Lad Prabhakar wrote:
> Parse endpoint properties using v4l2_fwnode_endpoint_alloc_parse()
> to determine the bus type and store it in the driver structure.
>
> Set bus_type to V4L2_MBUS_PARALLEL as it's the only supported one
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good!

Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks
   j

> ---
>  drivers/media/i2c/ov772x.c | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 2cc6a678069a..f61a3f09ad64 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -31,6 +31,7 @@
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
>  #include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
>  #include <media/v4l2-image-sizes.h>
>  #include <media/v4l2-subdev.h>
>
> @@ -434,6 +435,7 @@ struct ov772x_priv {
>  #ifdef CONFIG_MEDIA_CONTROLLER
>  	struct media_pad pad;
>  #endif
> +	enum v4l2_mbus_type		  bus_type;
>  };
>
>  /*
> @@ -1348,6 +1350,34 @@ static const struct v4l2_subdev_ops ov772x_subdev_ops = {
>  	.pad	= &ov772x_subdev_pad_ops,
>  };
>
> +static int ov772x_parse_dt(struct i2c_client *client,
> +			   struct ov772x_priv *priv)
> +{
> +	struct v4l2_fwnode_endpoint bus_cfg;
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
> +					    NULL);
> +	if (!ep) {
> +		dev_err(&client->dev, "Endpoint node not found\n");
> +		return -EINVAL;
> +	}
> +
> +	bus_cfg.bus_type = V4L2_MBUS_PARALLEL;
> +	ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> +	if (ret)
> +		goto error_fwnode_put;
> +
> +	priv->bus_type = bus_cfg.bus_type;
> +	v4l2_fwnode_endpoint_free(&bus_cfg);
> +
> +error_fwnode_put:
> +	fwnode_handle_put(ep);
> +
> +	return ret;
> +}
> +
>  /*
>   * i2c_driver function
>   */
> @@ -1415,6 +1445,10 @@ static int ov772x_probe(struct i2c_client *client)
>  		goto error_clk_put;
>  	}
>
> +	ret = ov772x_parse_dt(client, priv);
> +	if (ret)
> +		goto error_clk_put;
> +
>  	ret = ov772x_video_probe(priv);
>  	if (ret < 0)
>  		goto error_gpio_put;
> --
> 2.17.1
>

  reply	other threads:[~2020-09-30 10:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-17 17:42 [PATCH v6 0/3] media: i2c: ov772x: Enable BT.656 mode and test pattern support Lad Prabhakar
2020-09-17 17:42 ` [PATCH v6 1/3] media: i2c: ov772x: Parse endpoint properties Lad Prabhakar
2020-09-30 10:30   ` Jacopo Mondi [this message]
2020-09-30 11:45   ` Sakari Ailus
2020-09-30 12:19     ` Lad, Prabhakar
2020-10-01 19:34       ` Sakari Ailus
2020-09-17 17:42 ` [PATCH v6 2/3] media: i2c: ov772x: Add support for BT.656 mode Lad Prabhakar
2020-09-30 10:32   ` Jacopo Mondi
2020-09-17 17:42 ` [PATCH v6 3/3] media: i2c: ov772x: Add test pattern control Lad Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200930103037.putcmd7sjyaut6lr@uno.localdomain \
    --to=jacopo@jmondi.org \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.csengg@gmail.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).