linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Scott Branden <scott.branden@broadcom.com>
To: Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	Desmond Yan <desmond.yan@broadcom.com>
Subject: [PATCH v5 04/15] misc: bcm-vk: add misc device to Broadcom VK driver
Date: Wed, 30 Sep 2020 18:27:59 -0700	[thread overview]
Message-ID: <20201001012810.4172-5-scott.branden@broadcom.com> (raw)
In-Reply-To: <20201001012810.4172-1-scott.branden@broadcom.com>

Add misc device base support to create and remove devnode.
Additional misc functions for open/read/write/release/ioctl/sysfs, etc
will be added in follow on commits to allow for individual review.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
 drivers/misc/bcm-vk/bcm_vk.h     |  2 ++
 drivers/misc/bcm-vk/bcm_vk_dev.c | 36 +++++++++++++++++++++++++++++++-
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h
index c4fb61a84e41..0a366db693c8 100644
--- a/drivers/misc/bcm-vk/bcm_vk.h
+++ b/drivers/misc/bcm-vk/bcm_vk.h
@@ -7,6 +7,7 @@
 #define BCM_VK_H
 
 #include <linux/firmware.h>
+#include <linux/miscdevice.h>
 #include <linux/pci.h>
 #include <linux/sched/signal.h>
 
@@ -214,6 +215,7 @@ struct bcm_vk {
 
 	struct bcm_vk_dauth_info dauth_info;
 
+	struct miscdevice miscdev;
 	int devid; /* dev id allocated */
 
 	struct workqueue_struct *wq_thread;
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index 50a65f6f290b..c46591124eb4 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -7,6 +7,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
 #include <linux/fs.h>
+#include <linux/idr.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
@@ -638,6 +639,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	char name[20];
 	struct bcm_vk *vk;
 	struct device *dev = &pdev->dev;
+	struct miscdevice *misc_device;
 	u32 boot_status;
 
 	vk = kzalloc(sizeof(*vk), GFP_KERNEL);
@@ -713,6 +715,19 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	vk->devid = id;
 	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+	misc_device = &vk->miscdev;
+	misc_device->minor = MISC_DYNAMIC_MINOR;
+	misc_device->name = kstrdup(name, GFP_KERNEL);
+	if (!misc_device->name) {
+		err = -ENOMEM;
+		goto err_ida_remove;
+	}
+
+	err = misc_register(misc_device);
+	if (err) {
+		dev_err(dev, "failed to register device\n");
+		goto err_kfree_name;
+	}
 
 	INIT_WORK(&vk->wq_work, bcm_vk_wq_handler);
 
@@ -721,7 +736,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!vk->wq_thread) {
 		dev_err(dev, "Fail to create workqueue thread\n");
 		err = -ENOMEM;
-		goto err_ida_remove;
+		goto err_misc_deregister;
 	}
 
 	/* sync other info */
@@ -743,11 +758,20 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	dev_dbg(dev, "BCM-VK:%u created, 0x%p\n", id, vk);
+
 	return 0;
 
 err_destroy_workqueue:
 	destroy_workqueue(vk->wq_thread);
 
+err_misc_deregister:
+	misc_deregister(misc_device);
+
+err_kfree_name:
+	kfree(misc_device->name);
+	misc_device->name = NULL;
+
 err_ida_remove:
 	ida_simple_remove(&bcm_vk_ida, id);
 
@@ -777,6 +801,7 @@ static void bcm_vk_remove(struct pci_dev *pdev)
 {
 	int i;
 	struct bcm_vk *vk = pci_get_drvdata(pdev);
+	struct miscdevice *misc_device = &vk->miscdev;
 
 	/*
 	 * Trigger a reset to card and wait enough time for UCODE to rerun,
@@ -791,6 +816,13 @@ static void bcm_vk_remove(struct pci_dev *pdev)
 		dma_free_coherent(&pdev->dev, nr_scratch_pages * PAGE_SIZE,
 				  vk->tdma_vaddr, vk->tdma_addr);
 
+	/* remove if name is set which means misc dev registered */
+	if (misc_device->name) {
+		misc_deregister(misc_device);
+		kfree(misc_device->name);
+		ida_simple_remove(&bcm_vk_ida, vk->devid);
+	}
+
 	cancel_work_sync(&vk->wq_work);
 	destroy_workqueue(vk->wq_thread);
 
@@ -799,6 +831,8 @@ static void bcm_vk_remove(struct pci_dev *pdev)
 			pci_iounmap(pdev, vk->bar[i]);
 	}
 
+	dev_dbg(&pdev->dev, "BCM-VK:%d released\n", vk->devid);
+
 	pci_release_regions(pdev);
 	pci_free_irq_vectors(pdev);
 	pci_disable_device(pdev);
-- 
2.17.1


  parent reply	other threads:[~2020-10-01  1:28 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01  1:27 [PATCH v5 00/15] Add Broadcom VK driver Scott Branden
2020-10-01  1:27 ` [PATCH v5 01/15] bcm-vk: add bcm_vk UAPI Scott Branden
2020-10-01  1:27 ` [PATCH v5 02/15] misc: bcm-vk: add Broadcom VK driver Scott Branden
2020-10-01  1:27 ` [PATCH v5 03/15] misc: bcm-vk: add autoload support Scott Branden
2020-10-01  4:07   ` kernel test robot
2020-10-01 17:48     ` Scott Branden
2020-10-02  5:36       ` [kbuild-all] " Philip Li
2020-10-01  1:27 ` Scott Branden [this message]
2020-10-01  1:28 ` [PATCH v5 05/15] misc: bcm-vk: add triggers when host panic or reboots to notify card Scott Branden
2020-10-01  1:28 ` [PATCH v5 06/15] misc: bcm-vk: add open/release Scott Branden
2020-10-01  1:28 ` [PATCH v5 07/15] misc: bcm-vk: add ioctl load_image Scott Branden
2020-10-01  1:28 ` [PATCH v5 08/15] misc: bcm-vk: add get_card_info, peerlog_info, and proc_mon_info Scott Branden
2020-10-01  1:28 ` [PATCH v5 09/15] misc: bcm-vk: add VK messaging support Scott Branden
2020-10-01  1:43   ` Joe Perches
2020-10-01 18:27     ` Scott Branden
2020-10-01  1:28 ` [PATCH v5 10/15] misc: bcm-vk: reset_pid support Scott Branden
2020-10-01  1:28 ` [PATCH v5 11/15] misc: bcm-vk: add BCM_VK_QSTATS Scott Branden
2020-10-01  2:33   ` Florian Fainelli
2020-10-01 22:12     ` Scott Branden
2020-10-01 22:13       ` Florian Fainelli
2020-10-02 16:54         ` Scott Branden
2020-10-02  4:55       ` Greg Kroah-Hartman
2020-10-02 16:52         ` Scott Branden
2020-10-01  1:28 ` [PATCH v5 12/15] misc: bcm-vk: add sysfs interface Scott Branden
2020-10-01  2:30   ` Florian Fainelli
2020-10-01 22:17     ` Scott Branden
2020-10-01  1:28 ` [PATCH v5 13/15] misc: bcm-vk: add mmap function for exposing BAR2 Scott Branden
2020-10-01  1:28 ` [PATCH v5 14/15] MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver Scott Branden
2020-10-01  1:28 ` [PATCH v5 15/15] misc: bcm-vk: add ttyVK support Scott Branden
2020-10-01  2:36   ` Florian Fainelli
2020-10-01 22:26     ` Scott Branden
2020-10-01  2:38 ` [PATCH v5 00/15] Add Broadcom VK driver Florian Fainelli
2020-10-01 12:24   ` Olof Johansson
2020-10-01 22:34   ` Scott Branden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001012810.4172-5-scott.branden@broadcom.com \
    --to=scott.branden@broadcom.com \
    --cc=arnd@arndb.de \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=desmond.yan@broadcom.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).