From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: <will@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
<t-kristo@ti.com>, <faiz_abbas@ti.com>
Subject: [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards
Date: Fri, 2 Oct 2020 00:35:33 +0530 [thread overview]
Message-ID: <20201001190541.6364-1-faiz_abbas@ti.com> (raw)
The following patches add support for UHS modes for TI's j721e and j7200
boards.
Patches 1-3 add support for gpios to j7200-evm
Patches 4-6 add support for voltage regulators for required by the
SD card in both devices as well as enable UHS modes at 1.8V
Patches 5-6 add some required configs to the arm64 defconfig.
This series depends on driver patches adding tuning support here:
https://lore.kernel.org/linux-arm-kernel/20200923105206.7988-1-faiz_abbas@ti.com/
Faiz Abbas (8):
arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain
arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain
arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio
modules
arm64: dts: ti: k3-j721e-main: Add output tap delay values
arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS
modes
arm64: dts: ti: k3-j7200-common-proc-board: Add support SD card UHS
modes
arm64: defconfig: Enable OMAP I2C driver
arm64: defconfig: Enable DAVINCI_GPIO driver
.../dts/ti/k3-j7200-common-proc-board.dts | 48 +++++++++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 69 ++++++++++++++++++-
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++
.../dts/ti/k3-j721e-common-proc-board.dts | 35 +++++++++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 22 ++++--
arch/arm64/configs/defconfig | 2 +
6 files changed, 201 insertions(+), 7 deletions(-)
--
2.17.1
next reply other threads:[~2020-10-01 19:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 19:05 Faiz Abbas [this message]
2020-10-01 19:05 ` [PATCH 1/8] arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain Faiz Abbas
2020-10-01 19:05 ` [PATCH 2/8] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Faiz Abbas
2020-10-01 19:05 ` [PATCH 3/8] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Faiz Abbas
2020-10-01 19:05 ` [PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values Faiz Abbas
2020-10-01 19:05 ` [PATCH 5/8] arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS modes Faiz Abbas
2020-10-01 19:05 ` [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: " Faiz Abbas
2020-10-01 19:13 ` [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards Nishanth Menon
2020-10-02 4:44 ` Faiz Abbas
2020-10-02 12:49 ` Nishanth Menon
2020-10-02 16:09 ` Faiz Abbas
2020-10-26 14:55 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001190541.6364-1-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).