From: Rob Herring <robh@kernel.org>
To: Bogdan Togorean <bogdan.togorean@analog.com>
Cc: linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
Bingbu Cao <bingbu.cao@intel.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Shawn Tu <shawnx.tu@intel.com>,
Dongchun Zhu <dongchun.zhu@mediatek.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] media: dt-bindings: media: i2c: Add bindings for ADDI9036
Date: Tue, 6 Oct 2020 15:47:13 -0500 [thread overview]
Message-ID: <20201006204713.GA2807001@bogus> (raw)
In-Reply-To: <20201002133537.172379-2-bogdan.togorean@analog.com>
On Fri, Oct 02, 2020 at 04:35:17PM +0300, Bogdan Togorean wrote:
> Add YAML device tree bindings for Analog Devices Inc. ADDI9036 CCD TOF
> front-end.
>
> Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
> ---
> v2: added reg property description
> ---
> .../bindings/media/i2c/adi,addi9036.yaml | 76 +++++++++++++++++++
> 1 file changed, 76 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> new file mode 100644
> index 000000000000..7c4af704db98
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/adi,addi9036.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADDI9036 VGA CCD Time of Flight Sensor
> +
> +maintainers:
> + - Bogdan Togorean <bogdan.togorean@analog.com>
> +
> +description: |-
> + The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled
> + device (CCD) time of flight (TOF) imaging applications. It is programmable
> + through I2C interface. Image data is sent through MIPI CSI-2 2 lanes and
> + can output two RAW12 packed data streams. One is IR and the other is Depth.
> + Each data stream is on a separate or same MIPI Virtual Channel, depending
> + on configuration and each have 640x480 resolution.
> +
> +properties:
> + compatible:
> + const: adi,addi9036
> +
> + reg:
> + description: I2C device address
Can drop this.
> + maxItems: 1
> +
> + reset-gpios:
maxItems: 1
> + description: |-
> + Reference to the GPIO connected to the RST/SYNC pin, if any.
> + Must be released (set high) after all supplies are applied.
> +
> + # See ../video-interfaces.txt for more details
> + port:
> + type: object
> + properties:
> + endpoint:
> + type: object
> + properties:
> + data-lanes:
> + description: |-
> + The sensor supports two-lane operation.
> + For two-lane operation the property must be set to <1 2>.
> + items:
> + - const: 1
> + - const: 2
If this is the only possible setting, then why does it need to be in DT?
> +
> +required:
> + - compatible
> + - reg
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + addi9036: addi9036_tof@64 {
> + compatible = "adi,addi9036";
> + reg = <0x64>;
> +
> + reset-gpios = <&gpio 41 1>;
> +
> + port {
> + addi9036_ep: endpoint {
> + remote-endpoint = <&csi1_ep>;
> + data-lanes = <1 2>;
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.28.0
>
next prev parent reply other threads:[~2020-10-06 20:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-02 13:35 [PATCH v2 1/2] media: i2c: Add driver for the Analog Devices ADDI9036 ToF front-end Bogdan Togorean
2020-10-02 13:35 ` [PATCH v2 2/2] media: dt-bindings: media: i2c: Add bindings for ADDI9036 Bogdan Togorean
2020-10-06 20:47 ` Rob Herring [this message]
2020-10-08 6:23 ` Togorean, Bogdan
2020-10-08 6:35 ` Sakari Ailus
2020-10-08 6:42 ` Togorean, Bogdan
2020-10-07 11:18 ` [PATCH v2 1/2] media: i2c: Add driver for the Analog Devices ADDI9036 ToF front-end Sakari Ailus
2020-10-08 6:49 ` Togorean, Bogdan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201006204713.GA2807001@bogus \
--to=robh@kernel.org \
--cc=bingbu.cao@intel.com \
--cc=bogdan.togorean@analog.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dongchun.zhu@mediatek.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shawnx.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).