From: Stephen Boyd <swboyd@chromium.org>
To: Jonathan Cameron <jic23@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
Daniel Campello <campello@chromium.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Gwendal Grignou <gwendal@chromium.org>,
Evan Green <evgreen@chromium.org>
Subject: [PATCH v3 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties
Date: Tue, 6 Oct 2020 18:17:34 -0700 [thread overview]
Message-ID: <20201007011735.1346994-6-swboyd@chromium.org> (raw)
In-Reply-To: <20201007011735.1346994-1-swboyd@chromium.org>
We need to set various bits in the hardware registers for this device to
operate properly depending on how it is installed. Add a handful of DT
properties to configure these things.
Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: <devicetree@vger.kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
.../iio/proximity/semtech,sx9310.yaml | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5739074d3592..ccfb163f3d34 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -40,6 +40,63 @@ properties:
"#io-channel-cells":
const: 1
+ semtech,cs0-ground:
+ description: Indicates the CS0 sensor is connected to ground.
+ type: boolean
+
+ semtech,combined-sensors:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ List of which sensors are combined and represented by CS3.
+ Possible values are -
+ 3 - CS3 (internal)
+ 0 1 - CS0 + CS1
+ 1 2 - CS1 + CS2 (default)
+ 0 1 2 3 - CS0 + CS1 + CS2 + CS3
+ items:
+ enum: [ 0, 1, 2, 3 ]
+ minItems: 1
+ maxItems: 4
+
+ semtech,resolution:
+ description:
+ Capacitance measure resolution. Refer to datasheet for more details.
+ enum:
+ - coarsest
+ - very-coarse
+ - coarse
+ - medium-coarse
+ - medium
+ - fine
+ - very-fine
+ - finest
+
+ semtech,startup-sensor:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 1, 2, 3]
+ default: 0
+ description:
+ Sensor used for start-up proximity detection. The combined
+ sensor is represented by the value 3. This is used for initial
+ compensation.
+
+ semtech,proxraw-strength:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 2, 4, 8]
+ default: 2
+ description:
+ PROXRAW filter strength. A value of 0 represents off, and other values
+ represent 1-1/N.
+
+ semtech,avg-pos-strength:
+ $ref: /schemas/types.yaml#definitions/uint32
+ enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+ default: 16
+ description:
+ Average positive filter strength. A value of 0 represents off and
+ UINT_MAX (4294967295) represents infinite. Other values
+ represent 1-1/N.
+
required:
- compatible
- reg
@@ -61,5 +118,11 @@ examples:
vdd-supply = <&pp3300_a>;
svdd-supply = <&pp1800_prox>;
#io-channel-cells = <1>;
+ semtech,cs0-ground;
+ semtech,combined-sensors = <1 2 3>;
+ semtech,resolution = "fine";
+ semtech,startup-sensor = <1>;
+ semtech,proxraw-strength = <2>;
+ semtech,avg-pos-strength = <64>;
};
};
--
Sent by a computer, using git, on the internet
next prev parent reply other threads:[~2020-10-07 1:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-07 1:17 [PATCH v3 0/6] iio: sx9310: Support setting various settings Stephen Boyd
2020-10-07 1:17 ` [PATCH v3 1/6] iio: sx9310: Support hardware gain factor Stephen Boyd
2020-10-07 1:17 ` [PATCH v3 2/6] iio: sx9310: Support setting proximity thresholds Stephen Boyd
2020-10-07 1:17 ` [PATCH v3 3/6] iio: sx9310: Support setting hysteresis values Stephen Boyd
2020-10-07 1:17 ` [PATCH v3 4/6] iio: sx9310: Support setting debounce values Stephen Boyd
2020-10-07 1:17 ` Stephen Boyd [this message]
2020-10-07 1:17 ` [PATCH v3 6/6] iio: sx9310: Set various settings from DT Stephen Boyd
2020-10-10 16:39 ` [PATCH v3 0/6] iio: sx9310: Support setting various settings Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201007011735.1346994-6-swboyd@chromium.org \
--to=swboyd@chromium.org \
--cc=campello@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).