[PATCH AUTOSEL 5.8 01/24] net: lantiq: Add locking for TX DMA channel

[PATCH AUTOSEL 5.8 01/24] net: lantiq: Add locking for TX DMA channel

[Sasha Levin]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit f9317ae5523f99999fb54c513ebabbb2bc887ddf ]

The TX DMA channel data is accessed by the xrx200_start_xmit() and the
xrx200_tx_housekeeping() function from different threads. Make sure the
accesses are synchronized by acquiring the netif_tx_lock() in the
xrx200_tx_housekeeping() function too. This lock is acquired by the
kernel before calling xrx200_start_xmit().

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/lantiq_xrx200.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 635ff3a5dcfb3..51ed8a54d3801 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -245,6 +245,7 @@ static int xrx200_tx_housekeeping(struct napi_struct *napi, int budget)
 	int pkts = 0;
 	int bytes = 0;
 
+	netif_tx_lock(net_dev);
 	while (pkts < budget) {
 		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->tx_free];
 
@@ -268,6 +269,7 @@ static int xrx200_tx_housekeeping(struct napi_struct *napi, int budget)
 	net_dev->stats.tx_bytes += bytes;
 	netdev_completed_queue(ch->priv->net_dev, pkts, bytes);
 
+	netif_tx_unlock(net_dev);
 	if (netif_queue_stopped(net_dev))
 		netif_wake_queue(net_dev);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 02/24] platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit efe813d0b0e90a19102a36fd1d448a65dbf5d474 ]

Add touchscreen info for the MPMAN Converter9 2-in-1. This device uses the
same case as the ITworks TW891, but it uses a different digitizer, so it
needs its own firmware.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 5c223015ee71b..dda60f89c9512 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -373,6 +373,23 @@ static const struct ts_dmi_data jumper_ezpad_mini3_data = {
 	.properties	= jumper_ezpad_mini3_props,
 };
 
+static const struct property_entry mpman_converter9_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 8),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1664),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 880),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-mpman-converter9.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data mpman_converter9_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= mpman_converter9_props,
+};
+
 static const struct property_entry mpman_mpwin895cl_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 3),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 9),
@@ -976,6 +993,14 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
 		},
 	},
+	{
+		/* MP Man Converter 9 */
+		.driver_data = (void *)&mpman_converter9_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"),
+		},
+	},
 	{
 		/* MP Man MPWIN895CL */
 		.driver_data = (void *)&mpman_mpwin895cl_data,
-- 
2.25.1

[PATCH AUTOSEL 5.8 03/24] platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA"

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 8a333dab282467562b55096bab941b761ac26a73 ]

The WMI INIT method on for some reason turns on the camera LED on these
2-in-1s, without the WMI interface allowing further control over the LED.

To fix this commit b5f7311d3a2e ("platform/x86: asus-nb-wmi: Do not load
on Asus T100TA and T200TA") added a blacklist with these 2 models on it
since the WMI driver did not add any extra functionality to these models.

Recently I've been working on making more 2-in-1 models report their
tablet-mode (SW_TABLET_MODE) to userspace; and I've found that these 2
Asus models report this through WMI. This commit reverts the adding
of the blacklist, so that the Asus WMI driver can be used on these
models to report their tablet-mode. I have another patch fixing the LED
issue in a different manner.

Note this is the second time the we revert the adding of the
asus_nb_wmi_blacklist. It was reverted before in commit:

aab9e7896ec9 ("platform/x86: asus-nb-wmi: Revert "Do not load on Asus
T100TA and T200TA")"

But some how (accidentally re-applying of the patch?) it got re-added
again in commit 3bd12da7f50b ("platform/x86: asus-nb-wmi: Do not load
on Asus T100TA and T200TA"), so now we need to revert it again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-nb-wmi.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 6c42f73c1dfd3..80d37b9aae898 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -598,33 +598,9 @@ static struct asus_wmi_driver asus_nb_wmi_driver = {
 	.detect_quirks = asus_nb_wmi_quirks,
 };
 
-static const struct dmi_system_id asus_nb_wmi_blacklist[] __initconst = {
-	{
-		/*
-		 * asus-nb-wm adds no functionality. The T100TA has a detachable
-		 * USB kbd, so no hotkeys and it has no WMI rfkill; and loading
-		 * asus-nb-wm causes the camera LED to turn and _stay_ on.
-		 */
-		.matches = {
-			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
-		},
-	},
-	{
-		/* The Asus T200TA has the same issue as the T100TA */
-		.matches = {
-			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T200TA"),
-		},
-	},
-	{} /* Terminating entry */
-};
 
 static int __init asus_nb_wmi_init(void)
 {
-	if (dmi_check_system(asus_nb_wmi_blacklist))
-		return -ENODEV;
-
 	return asus_wmi_register_driver(&asus_nb_wmi_driver);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 04/24] platform/x86: asus-wmi: Add BATC battery name to the list of supported

[Sasha Levin]

From: Marius Iacob <themariusus@gmail.com>

[ Upstream commit 1d2dd379bd99ee4356ae4552fd1b8e43c7ca02cd ]

The Intel Atom Cherry Trail platform reports a new battery
name (BATC). Tested on ASUS Transformer Mini T103HAF.

Signed-off-by: Marius Iacob <themariusus@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-wmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 8f4acdc06b134..fa39ff030bd7c 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -442,6 +442,7 @@ static int asus_wmi_battery_add(struct power_supply *battery)
 	 */
 	if (strcmp(battery->desc->name, "BAT0") != 0 &&
 	    strcmp(battery->desc->name, "BAT1") != 0 &&
+	    strcmp(battery->desc->name, "BATC") != 0 &&
 	    strcmp(battery->desc->name, "BATT") != 0)
 		return -ENODEV;
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 05/24] platform/x86: mlx-platform: Fix extended topology configuration for power supply units

[Sasha Levin]

From: Vadim Pasternak <vadimp@nvidia.com>

[ Upstream commit 2b06a1c889ca33d550675db4b0ca91e1b4dd9873 ]

Fix topology configuration for power supply units in structure
'mlxplat_mlxcpld_ext_pwr_items_data', due to hardware change.

Note: no need to backport the fix, since there is no such hardware yet
(equipped with four power) at the filed.

Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/mlx-platform.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index c27548fd386ac..0443632faed9f 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -163,7 +163,6 @@
 #define MLXPLAT_CPLD_NR_NONE			-1
 #define MLXPLAT_CPLD_PSU_DEFAULT_NR		10
 #define MLXPLAT_CPLD_PSU_MSNXXXX_NR		4
-#define MLXPLAT_CPLD_PSU_MSNXXXX_NR2		3
 #define MLXPLAT_CPLD_FAN1_DEFAULT_NR		11
 #define MLXPLAT_CPLD_FAN2_DEFAULT_NR		12
 #define MLXPLAT_CPLD_FAN3_DEFAULT_NR		13
@@ -337,6 +336,15 @@ static struct i2c_board_info mlxplat_mlxcpld_pwr[] = {
 	},
 };
 
+static struct i2c_board_info mlxplat_mlxcpld_ext_pwr[] = {
+	{
+		I2C_BOARD_INFO("dps460", 0x5b),
+	},
+	{
+		I2C_BOARD_INFO("dps460", 0x5a),
+	},
+};
+
 static struct i2c_board_info mlxplat_mlxcpld_fan[] = {
 	{
 		I2C_BOARD_INFO("24c32", 0x50),
@@ -911,15 +919,15 @@ static struct mlxreg_core_data mlxplat_mlxcpld_ext_pwr_items_data[] = {
 		.label = "pwr3",
 		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
 		.mask = BIT(2),
-		.hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0],
-		.hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR2,
+		.hpdev.brdinfo = &mlxplat_mlxcpld_ext_pwr[0],
+		.hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
 	},
 	{
 		.label = "pwr4",
 		.reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET,
 		.mask = BIT(3),
-		.hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1],
-		.hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR2,
+		.hpdev.brdinfo = &mlxplat_mlxcpld_ext_pwr[1],
+		.hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR,
 	},
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 06/24] mt76: mt7615: reduce maximum VHT MPDU length to 7991

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit efb1676306f664625c0c546dd10d18d33c75e3fc ]

After fixing mac80211 to allow larger A-MSDUs in some cases, there have been
reports of performance regressions and packet loss with some clients.
It appears that the issue occurs when the hardware is transmitting A-MSDUs
bigger than 8k. Limit the local VHT MPDU size capability to 7991, matching
the value used for MT7915 as well.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200923052442.24141-1-nbd@nbd.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index e2d80518e5af9..992a36602ad4c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -453,7 +453,7 @@ void mt7615_init_device(struct mt7615_dev *dev)
 	dev->mphy.sband_2g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
 	dev->mphy.sband_5g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
 	dev->mphy.sband_5g.sband.vht_cap.cap |=
-			IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
+			IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
 			IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
 	mt7615_cap_dbdc_disable(dev);
 	dev->phy.dfs_state = -1;
-- 
2.25.1

[PATCH AUTOSEL 5.8 07/24] drivers/net/wan/x25_asy: Correct the ndo_open and ndo_stop functions

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit ed46cd1d4cc4b2cf05f31fe25fc68d1a9d3589ba ]

1.
Move the lapb_register/lapb_unregister calls into the ndo_open/ndo_stop
functions.
This makes the LAPB protocol start/stop when the network interface
starts/stops. When the network interface is down, the LAPB protocol
shouldn't be running and the LAPB module shoudn't be generating control
frames.

2.
Move netif_start_queue/netif_stop_queue into the ndo_open/ndo_stop
functions.
This makes the TX queue start/stop when the network interface
starts/stops.
(netif_stop_queue was originally in the ndo_stop function. But to make
the code look better, I created a new function to use as ndo_stop, and
made it call the original ndo_stop function. I moved netif_stop_queue
from the original ndo_stop function to the new ndo_stop function.)

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/x25_asy.c | 43 +++++++++++++++++++++++----------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 84640a0c13f35..6b427d5dec7e4 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -456,7 +456,6 @@ static int x25_asy_open(struct net_device *dev)
 {
 	struct x25_asy *sl = netdev_priv(dev);
 	unsigned long len;
-	int err;
 
 	if (sl->tty == NULL)
 		return -ENODEV;
@@ -482,14 +481,7 @@ static int x25_asy_open(struct net_device *dev)
 	sl->xleft    = 0;
 	sl->flags   &= (1 << SLF_INUSE);      /* Clear ESCAPE & ERROR flags */
 
-	netif_start_queue(dev);
-
-	/*
-	 *	Now attach LAPB
-	 */
-	err = lapb_register(dev, &x25_asy_callbacks);
-	if (err == LAPB_OK)
-		return 0;
+	return 0;
 
 	/* Cleanup */
 	kfree(sl->xbuff);
@@ -511,7 +503,6 @@ static int x25_asy_close(struct net_device *dev)
 	if (sl->tty)
 		clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 
-	netif_stop_queue(dev);
 	sl->rcount = 0;
 	sl->xleft  = 0;
 	spin_unlock(&sl->lock);
@@ -596,7 +587,6 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 static void x25_asy_close_tty(struct tty_struct *tty)
 {
 	struct x25_asy *sl = tty->disc_data;
-	int err;
 
 	/* First make sure we're connected. */
 	if (!sl || sl->magic != X25_ASY_MAGIC)
@@ -607,11 +597,6 @@ static void x25_asy_close_tty(struct tty_struct *tty)
 		dev_close(sl->dev);
 	rtnl_unlock();
 
-	err = lapb_unregister(sl->dev);
-	if (err != LAPB_OK)
-		pr_err("%s: lapb_unregister error: %d\n",
-		       __func__, err);
-
 	tty->disc_data = NULL;
 	sl->tty = NULL;
 	x25_asy_free(sl);
@@ -714,15 +699,39 @@ static int x25_asy_ioctl(struct tty_struct *tty, struct file *file,
 
 static int x25_asy_open_dev(struct net_device *dev)
 {
+	int err;
 	struct x25_asy *sl = netdev_priv(dev);
 	if (sl->tty == NULL)
 		return -ENODEV;
+
+	err = lapb_register(dev, &x25_asy_callbacks);
+	if (err != LAPB_OK)
+		return -ENOMEM;
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static int x25_asy_close_dev(struct net_device *dev)
+{
+	int err;
+
+	netif_stop_queue(dev);
+
+	err = lapb_unregister(dev);
+	if (err != LAPB_OK)
+		pr_err("%s: lapb_unregister error: %d\n",
+		       __func__, err);
+
+	x25_asy_close(dev);
+
 	return 0;
 }
 
 static const struct net_device_ops x25_asy_netdev_ops = {
 	.ndo_open	= x25_asy_open_dev,
-	.ndo_stop	= x25_asy_close,
+	.ndo_stop	= x25_asy_close_dev,
 	.ndo_start_xmit	= x25_asy_xmit,
 	.ndo_tx_timeout	= x25_asy_timeout,
 	.ndo_change_mtu	= x25_asy_change_mtu,
-- 
2.25.1

[PATCH AUTOSEL 5.8 08/24] net: mscc: ocelot: fix fields offset in SG_CONFIG_REG_3

[Sasha Levin]

From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>

[ Upstream commit 4ab810a4e04ab6c851007033d39c13e6d3f55110 ]

INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3.
This register is used by stream gate control of PSFP, and it has not
been used before, because PSFP is not implemented in ocelot driver.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/soc/mscc/ocelot_ana.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/soc/mscc/ocelot_ana.h b/include/soc/mscc/ocelot_ana.h
index 841c6ec22b641..1669481d97794 100644
--- a/include/soc/mscc/ocelot_ana.h
+++ b/include/soc/mscc/ocelot_ana.h
@@ -252,10 +252,10 @@
 #define ANA_SG_CONFIG_REG_3_LIST_LENGTH_M                 GENMASK(18, 16)
 #define ANA_SG_CONFIG_REG_3_LIST_LENGTH_X(x)              (((x) & GENMASK(18, 16)) >> 16)
 #define ANA_SG_CONFIG_REG_3_GATE_ENABLE                   BIT(20)
-#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 24) & GENMASK(27, 24))
-#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(27, 24)
-#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(27, 24)) >> 24)
-#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(28)
+#define ANA_SG_CONFIG_REG_3_INIT_IPS(x)                   (((x) << 21) & GENMASK(24, 21))
+#define ANA_SG_CONFIG_REG_3_INIT_IPS_M                    GENMASK(24, 21)
+#define ANA_SG_CONFIG_REG_3_INIT_IPS_X(x)                 (((x) & GENMASK(24, 21)) >> 21)
+#define ANA_SG_CONFIG_REG_3_INIT_GATE_STATE               BIT(25)
 
 #define ANA_SG_GCL_GS_CONFIG_RSZ                          0x4
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 09/24] net/fsl: quieten expected MDIO access failures

[Sasha Levin]

From: Jamie Iles <jamie@nuviainc.com>

[ Upstream commit 1ec8e74855588cecb2620b28b877c08f45765374 ]

MDIO reads can happen during PHY probing, and printing an error with
dev_err can result in a large number of error messages during device
probe.  On a platform with a serial console this can result in
excessively long boot times in a way that looks like an infinite loop
when multiple busses are present.  Since 0f183fd151c (net/fsl: enable
extended scanning in xgmac_mdio) we perform more scanning so there are
potentially more failures.

Reduce the logging level to dev_dbg which is consistent with the
Freescale enetc driver.

Cc: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/xgmac_mdio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index c82c85ef5fb34..61cb4ba0005bd 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -229,7 +229,7 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 	/* Return all Fs if nothing was there */
 	if ((xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
 	    !priv->has_a011043) {
-		dev_err(&bus->dev,
+		dev_dbg(&bus->dev,
 			"Error while reading PHY%d reg at %d.%hhu\n",
 			phy_id, dev_addr, regnum);
 		return 0xffff;
-- 
2.25.1

[PATCH AUTOSEL 5.8 10/24] net: usb: ax88179_178a: add Toshiba usb 3.0 adapter

[Sasha Levin]

From: Wilken Gottwalt <wilken.gottwalt@mailbox.org>

[ Upstream commit e42d72fea91f8f2e82b65808739ca04b7a8cd7a8 ]

Adds the driver_info and usb ids of the AX88179 based Toshiba USB 3.0
ethernet adapter.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index a38e868e44d46..125f7bf57590b 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1828,6 +1828,19 @@ static const struct driver_info belkin_info = {
 	.tx_fixup = ax88179_tx_fixup,
 };
 
+static const struct driver_info toshiba_info = {
+	.description = "Toshiba USB Ethernet Adapter",
+	.bind	= ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset	= ax88179_reset,
+	.stop = ax88179_stop,
+	.flags	= FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
 static const struct usb_device_id products[] = {
 {
 	/* ASIX AX88179 10/100/1000 */
@@ -1861,6 +1874,10 @@ static const struct usb_device_id products[] = {
 	/* Belkin B2B128 USB 3.0 Hub + Gigabit Ethernet Adapter */
 	USB_DEVICE(0x050d, 0x0128),
 	.driver_info = (unsigned long)&belkin_info,
+}, {
+	/* Toshiba USB 3.0 GBit Ethernet Adapter */
+	USB_DEVICE(0x0930, 0x0a13),
+	.driver_info = (unsigned long)&toshiba_info,
 },
 	{ },
 };
-- 
2.25.1

[PATCH AUTOSEL 5.8 11/24] net: atlantic: fix build when object tree is separate

[Sasha Levin]

From: Igor Russkikh <irusskikh@marvell.com>

[ Upstream commit 059432495e209279bae12db3d2b0bc8c8fe987bb ]

Driver subfolder files refer parent folder includes in an
absolute manner.

Makefile contains a -I for this, but apparently that does not
work if object tree is separated.

Adding srctree to fix that.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/Makefile b/drivers/net/ethernet/aquantia/atlantic/Makefile
index 130a105d03f3b..8ebcc68e807fc 100644
--- a/drivers/net/ethernet/aquantia/atlantic/Makefile
+++ b/drivers/net/ethernet/aquantia/atlantic/Makefile
@@ -8,7 +8,7 @@
 
 obj-$(CONFIG_AQTION) += atlantic.o
 
-ccflags-y += -I$(src)
+ccflags-y += -I$(srctree)/$(src)
 
 atlantic-objs := aq_main.o \
 	aq_nic.o \
@@ -33,4 +33,4 @@ atlantic-objs := aq_main.o \
 
 atlantic-$(CONFIG_MACSEC) += aq_macsec.o
 
-atlantic-$(CONFIG_PTP_1588_CLOCK) += aq_ptp.o
\ No newline at end of file
+atlantic-$(CONFIG_PTP_1588_CLOCK) += aq_ptp.o
-- 
2.25.1

[PATCH AUTOSEL 5.8 12/24] net: usb: ax88179_178a: add MCT usb 3.0 adapter

[Sasha Levin]

From: Wilken Gottwalt <wilken.gottwalt@mailbox.org>

[ Upstream commit c92a79829c7c169139874aa1d4bf6da32d10c38a ]

Adds the driver_info and usb ids of the AX88179 based MCT U3-A9003 USB
3.0 ethernet adapter.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 125f7bf57590b..a2f8a93c89269 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1841,6 +1841,19 @@ static const struct driver_info toshiba_info = {
 	.tx_fixup = ax88179_tx_fixup,
 };
 
+static const struct driver_info mct_info = {
+	.description = "MCT USB 3.0 Gigabit Ethernet Adapter",
+	.bind	= ax88179_bind,
+	.unbind	= ax88179_unbind,
+	.status	= ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset	= ax88179_reset,
+	.stop	= ax88179_stop,
+	.flags	= FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
 static const struct usb_device_id products[] = {
 {
 	/* ASIX AX88179 10/100/1000 */
@@ -1878,6 +1891,10 @@ static const struct usb_device_id products[] = {
 	/* Toshiba USB 3.0 GBit Ethernet Adapter */
 	USB_DEVICE(0x0930, 0x0a13),
 	.driver_info = (unsigned long)&toshiba_info,
+}, {
+	/* Magic Control Technology U3-A9003 USB 3.0 Gigabit Ethernet Adapter */
+	USB_DEVICE(0x0711, 0x0179),
+	.driver_info = (unsigned long)&mct_info,
 },
 	{ },
 };
-- 
2.25.1

[PATCH AUTOSEL 5.8 13/24] net: dsa: felix: fix incorrect action offsets for VCAP IS2

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 460e985ea07ec23d46af257e84e57b5409576577 ]

The port mask width was larger than the actual number of ports, and
therefore, all fields following this one were also shifted by the number
of excess bits. But the driver doesn't use the REW_OP, SMAC_REPLACE_ENA
or ACL_ID bits from the action vector, so the bug was inconsequential.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 7c167a394b762..885a59c97ff23 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -647,12 +647,12 @@ struct vcap_field vsc9959_vcap_is2_actions[] = {
 	[VCAP_IS2_ACT_POLICE_ENA]		= {  9,  1},
 	[VCAP_IS2_ACT_POLICE_IDX]		= { 10,  9},
 	[VCAP_IS2_ACT_POLICE_VCAP_ONLY]		= { 19,  1},
-	[VCAP_IS2_ACT_PORT_MASK]		= { 20, 11},
-	[VCAP_IS2_ACT_REW_OP]			= { 31,  9},
-	[VCAP_IS2_ACT_SMAC_REPLACE_ENA]		= { 40,  1},
-	[VCAP_IS2_ACT_RSV]			= { 41,  2},
-	[VCAP_IS2_ACT_ACL_ID]			= { 43,  6},
-	[VCAP_IS2_ACT_HIT_CNT]			= { 49, 32},
+	[VCAP_IS2_ACT_PORT_MASK]		= { 20,  6},
+	[VCAP_IS2_ACT_REW_OP]			= { 26,  9},
+	[VCAP_IS2_ACT_SMAC_REPLACE_ENA]		= { 35,  1},
+	[VCAP_IS2_ACT_RSV]			= { 36,  2},
+	[VCAP_IS2_ACT_ACL_ID]			= { 38,  6},
+	[VCAP_IS2_ACT_HIT_CNT]			= { 44, 32},
 };
 
 static const struct vcap_props vsc9959_vcap_props[] = {
-- 
2.25.1

[PATCH AUTOSEL 5.8 14/24] via-rhine: Fix for the hardware having a reset failure after resume

[Sasha Levin]

From: Kevin Brace <kevinbrace@bracecomputerlab.com>

[ Upstream commit d120c9a81e32c43cba8017dec873b6a414898716 ]

In rhine_resume() and rhine_suspend(), the code calls netif_running()
to see if the network interface is down or not.  If it is down (i.e.,
netif_running() returning false), they will skip any housekeeping work
within the function relating to the hardware.  This becomes a problem
when the hardware resumes from a standby since it is counting on
rhine_resume() to map its MMIO and power up rest of the hardware.
Not getting its MMIO remapped and rest of the hardware powered
up lead to a soft reset failure and hardware disappearance.  The
solution is to map its MMIO and power up rest of the hardware inside
rhine_open() before soft reset is to be performed.  This solution was
verified on ASUS P5V800-VM mainboard's integrated Rhine-II Ethernet
MAC inside VIA Technologies VT8251 South Bridge.

Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/via/via-rhine.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 803247d51fe97..a20492da34079 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1706,6 +1706,8 @@ static int rhine_open(struct net_device *dev)
 		goto out_free_ring;
 
 	alloc_tbufs(dev);
+	enable_mmio(rp->pioaddr, rp->quirks);
+	rhine_power_init(dev);
 	rhine_chip_reset(dev);
 	rhine_task_enable(rp);
 	init_registers(dev);
-- 
2.25.1

[PATCH AUTOSEL 5.8 15/24] via-rhine: VTunknown1 device is really VT8251 South Bridge

[Sasha Levin]

From: Kevin Brace <kevinbrace@bracecomputerlab.com>

[ Upstream commit aa15190cf2cf25ec7e6c6d7373ae3ca563d48601 ]

The VIA Technologies VT8251 South Bridge's integrated Rhine-II
Ethernet MAC comes has a PCI revision value of 0x7c.  This was
verified on ASUS P5V800-VM mainboard.

Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/via/via-rhine.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index a20492da34079..d3a2be2e75d09 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -243,7 +243,7 @@ enum rhine_revs {
 	VT8233		= 0x60,	/* Integrated MAC */
 	VT8235		= 0x74,	/* Integrated MAC */
 	VT8237		= 0x78,	/* Integrated MAC */
-	VTunknown1	= 0x7C,
+	VT8251		= 0x7C,	/* Integrated MAC */
 	VT6105		= 0x80,
 	VT6105_B0	= 0x83,
 	VT6105L		= 0x8A,
-- 
2.25.1

[PATCH AUTOSEL 5.8 16/24] vhost vdpa: fix vhost_vdpa_open error handling

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit 37787e9f81e2e586b526ff5c29c94e4f41513e80 ]

We must free the vqs array in the open failure path, because
vhost_vdpa_release will not be called.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/1600712588-9514-2-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vdpa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
index a54b60d6623f0..13cdf38f8578a 100644
--- a/drivers/vhost/vdpa.c
+++ b/drivers/vhost/vdpa.c
@@ -760,6 +760,7 @@ static int vhost_vdpa_open(struct inode *inode, struct file *filep)
 
 err_init_iotlb:
 	vhost_dev_cleanup(&v->vdev);
+	kfree(vqs);
 err:
 	atomic_dec(&v->opened);
 	return r;
-- 
2.25.1

[PATCH AUTOSEL 5.8 17/24] net: usb: pegasus: Proper error handing when setting pegasus' MAC address

[Sasha Levin]

From: Petko Manolov <petko.manolov@konsulko.com>

[ Upstream commit f30e25a9d1b25ac8d40071c4dc2679ad0fcdc55a ]

v2:

If reading the MAC address from eeprom fail don't throw an error, use randomly
generated MAC instead.  Either way the adapter will soldier on and the return
type of set_ethernet_addr() can be reverted to void.

v1:

Fix a bug in set_ethernet_addr() which does not take into account possible
errors (or partial reads) returned by its helpers.  This can potentially lead to
writing random data into device's MAC address registers.

Signed-off-by: Petko Manolov <petko.manolov@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/pegasus.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 0ef7e1f443e33..2e7b67fc7e64d 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -360,28 +360,47 @@ fail:
 }
 #endif				/* PEGASUS_WRITE_EEPROM */
 
-static inline void get_node_id(pegasus_t *pegasus, __u8 *id)
+static inline int get_node_id(pegasus_t *pegasus, u8 *id)
 {
-	int i;
-	__u16 w16;
+	int i, ret;
+	u16 w16;
 
 	for (i = 0; i < 3; i++) {
-		read_eprom_word(pegasus, i, &w16);
+		ret = read_eprom_word(pegasus, i, &w16);
+		if (ret < 0)
+			return ret;
 		((__le16 *) id)[i] = cpu_to_le16(w16);
 	}
+
+	return 0;
 }
 
 static void set_ethernet_addr(pegasus_t *pegasus)
 {
-	__u8 node_id[6];
+	int ret;
+	u8 node_id[6];
 
 	if (pegasus->features & PEGASUS_II) {
-		get_registers(pegasus, 0x10, sizeof(node_id), node_id);
+		ret = get_registers(pegasus, 0x10, sizeof(node_id), node_id);
+		if (ret < 0)
+			goto err;
 	} else {
-		get_node_id(pegasus, node_id);
-		set_registers(pegasus, EthID, sizeof(node_id), node_id);
+		ret = get_node_id(pegasus, node_id);
+		if (ret < 0)
+			goto err;
+		ret = set_registers(pegasus, EthID, sizeof(node_id), node_id);
+		if (ret < 0)
+			goto err;
 	}
+
 	memcpy(pegasus->net->dev_addr, node_id, sizeof(node_id));
+
+	return;
+err:
+	eth_hw_addr_random(pegasus->net);
+	dev_info(&pegasus->intf->dev, "software assigned MAC address.\n");
+
+	return;
 }
 
 static inline int reset_mac(pegasus_t *pegasus)
-- 
2.25.1

[PATCH AUTOSEL 5.8 18/24] net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails

[Sasha Levin]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

[ Upstream commit f45a4248ea4cc13ed50618ff066849f9587226b2 ]

When get_registers() fails in set_ethernet_addr(),the uninitialized
value of node_id gets copied over as the address.
So, check the return value of get_registers().

If get_registers() executed successfully (i.e., it returns
sizeof(node_id)), copy over the MAC address using ether_addr_copy()
(instead of using memcpy()).

Else, if get_registers() failed instead, a randomly generated MAC
address is set as the MAC address instead.

Reported-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com
Tested-by: syzbot+abbc768b560c84d92fd3@syzkaller.appspotmail.com
Acked-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/rtl8150.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index e7c630d375899..63a4da0b2d6dd 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -274,12 +274,20 @@ static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
 		return 1;
 }
 
-static inline void set_ethernet_addr(rtl8150_t * dev)
+static void set_ethernet_addr(rtl8150_t *dev)
 {
-	u8 node_id[6];
+	u8 node_id[ETH_ALEN];
+	int ret;
+
+	ret = get_registers(dev, IDR, sizeof(node_id), node_id);
 
-	get_registers(dev, IDR, sizeof(node_id), node_id);
-	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
+	if (ret == sizeof(node_id)) {
+		ether_addr_copy(dev->netdev->dev_addr, node_id);
+	} else {
+		eth_hw_addr_random(dev->netdev);
+		netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n",
+			      dev->netdev->dev_addr);
+	}
 }
 
 static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
-- 
2.25.1

[PATCH AUTOSEL 5.8 19/24] usermodehelper: reset umask to default before executing user process

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 4013c1496c49615d90d36b9d513eee8e369778e9 ]

Kernel threads intentionally do CLONE_FS in order to follow any changes
that 'init' does to set up the root directory (or cwd).

It is admittedly a bit odd, but it avoids the situation where 'init'
does some extensive setup to initialize the system environment, and then
we execute a usermode helper program, and it uses the original FS setup
from boot time that may be very limited and incomplete.

[ Both Al Viro and Eric Biederman point out that 'pivot_root()' will
  follow the root regardless, since it fixes up other users of root (see
  chroot_fs_refs() for details), but overmounting root and doing a
  chroot() would not. ]

However, Vegard Nossum noticed that the CLONE_FS not only means that we
follow the root and current working directories, it also means we share
umask with whatever init changed it to. That wasn't intentional.

Just reset umask to the original default (0022) before actually starting
the usermode helper program.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/umh.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/kernel/umh.c b/kernel/umh.c
index 79f139a7ca03c..6aaf456d402d9 100644
--- a/kernel/umh.c
+++ b/kernel/umh.c
@@ -14,6 +14,7 @@
 #include <linux/cred.h>
 #include <linux/file.h>
 #include <linux/fdtable.h>
+#include <linux/fs_struct.h>
 #include <linux/workqueue.h>
 #include <linux/security.h>
 #include <linux/mount.h>
@@ -75,6 +76,14 @@ static int call_usermodehelper_exec_async(void *data)
 	flush_signal_handlers(current, 1);
 	spin_unlock_irq(&current->sighand->siglock);
 
+	/*
+	 * Initial kernel threads share ther FS with init, in order to
+	 * get the init root directory. But we've now created a new
+	 * thread that is going to execve a user process and has its own
+	 * 'struct fs_struct'. Reset umask to the default.
+	 */
+	current->fs->umask = 0022;
+
 	/*
 	 * Our parent (unbound workqueue) runs with elevated scheduling
 	 * priority. Avoid propagating that into the userspace child.
-- 
2.25.1

[PATCH AUTOSEL 5.8 20/24] riscv: Fixup bootup failure with HARDENED_USERCOPY

[Sasha Levin]

From: Guo Ren <guoren@linux.alibaba.com>

[ Upstream commit 84814460eef9af0fb56a4698341c9cb7996a6312 ]

6184358da000 ("riscv: Fixup static_obj() fail") attempted to elide a lockdep
failure by rearranging our kernel image to place all initdata within [_stext,
_end], thus triggering lockdep to treat these as static objects.  These objects
are released and eventually reallocated, causing check_kernel_text_object() to
trigger a BUG().

This backs out the change to make [_stext, _end] all-encompassing, instead just
moving initdata.  This results in initdata being outside of [__init_begin,
__init_end], which means initdata can't be freed.

Link: https://lore.kernel.org/linux-riscv/1593266228-61125-1-git-send-email-guoren@kernel.org/T/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
[Palmer: Clean up commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/vmlinux.lds.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index f3586e31ed1ec..34d00d9e6eac0 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -22,13 +22,11 @@ SECTIONS
 	/* Beginning of code and text segment */
 	. = LOAD_OFFSET;
 	_start = .;
-	_stext = .;
 	HEAD_TEXT_SECTION
 	. = ALIGN(PAGE_SIZE);
 
 	__init_begin = .;
 	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
 	. = ALIGN(8);
 	__soc_early_init_table : {
 		__soc_early_init_table_start = .;
@@ -55,6 +53,7 @@ SECTIONS
 	. = ALIGN(SECTION_ALIGN);
 	.text : {
 		_text = .;
+		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
 		CPUIDLE_TEXT
@@ -67,6 +66,8 @@ SECTIONS
 		_etext = .;
 	}
 
+	INIT_DATA_SECTION(16)
+
 	/* Start of data section */
 	_sdata = .;
 	RO_DATA(SECTION_ALIGN)
-- 
2.25.1

[PATCH AUTOSEL 5.8 21/24] arm/arm64: xen: Fix to convert percpu address to gfn correctly

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5a0677110b73dd3e1766f89159701bfe8ac06808 ]

Use per_cpu_ptr_to_phys() instead of virt_to_phys() for per-cpu
address conversion.

In xen_starting_cpu(), per-cpu xen_vcpu_info address is converted
to gfn by virt_to_gfn() macro. However, since the virt_to_gfn(v)
assumes the given virtual address is in linear mapped kernel memory
area, it can not convert the per-cpu memory if it is allocated on
vmalloc area.

This depends on CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK.
If it is enabled, the first chunk of percpu memory is linear mapped.
In the other case, that is allocated from vmalloc area. Moreover,
if the first chunk of percpu has run out until allocating
xen_vcpu_info, it will be allocated on the 2nd chunk, which is
based on kernel memory or vmalloc memory (depends on
CONFIG_NEED_PER_CPU_KM).

Without this fix and kernel configured to use vmalloc area for
the percpu memory, the Dom0 kernel will fail to boot with following
errors.

[    0.466172] Xen: initializing cpu0
[    0.469601] ------------[ cut here ]------------
[    0.474295] WARNING: CPU: 0 PID: 1 at arch/arm64/xen/../../arm/xen/enlighten.c:153 xen_starting_cpu+0x160/0x180
[    0.484435] Modules linked in:
[    0.487565] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc4+ #4
[    0.493895] Hardware name: Socionext Developer Box (DT)
[    0.499194] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[    0.504836] pc : xen_starting_cpu+0x160/0x180
[    0.509263] lr : xen_starting_cpu+0xb0/0x180
[    0.513599] sp : ffff8000116cbb60
[    0.516984] x29: ffff8000116cbb60 x28: ffff80000abec000
[    0.522366] x27: 0000000000000000 x26: 0000000000000000
[    0.527754] x25: ffff80001156c000 x24: fffffdffbfcdb600
[    0.533129] x23: 0000000000000000 x22: 0000000000000000
[    0.538511] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[    0.543892] x19: ffff8000113a9988 x18: 0000000000000010
[    0.549274] x17: 0000000094fe0f81 x16: 00000000deadbeef
[    0.554655] x15: ffffffffffffffff x14: 0720072007200720
[    0.560037] x13: 0720072007200720 x12: 0720072007200720
[    0.565418] x11: 0720072007200720 x10: 0720072007200720
[    0.570801] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[    0.576182] x7 : 0000000000000054 x6 : ffff00001b790f00
[    0.581564] x5 : ffff800010bbf880 x4 : 0000000000000000
[    0.586945] x3 : 0000000000000000 x2 : ffff80000abec000
[    0.592327] x1 : 000000000000002f x0 : 0000800000000000
[    0.597716] Call trace:
[    0.600232]  xen_starting_cpu+0x160/0x180
[    0.604309]  cpuhp_invoke_callback+0xac/0x640
[    0.608736]  cpuhp_issue_call+0xf4/0x150
[    0.612728]  __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[    0.618030]  __cpuhp_setup_state+0x84/0xf8
[    0.622192]  xen_guest_init+0x324/0x364
[    0.626097]  do_one_initcall+0x54/0x250
[    0.630003]  kernel_init_freeable+0x12c/0x2c8
[    0.634428]  kernel_init+0x1c/0x128
[    0.637988]  ret_from_fork+0x10/0x18
[    0.641635] ---[ end trace d95b5309a33f8b27 ]---
[    0.646337] ------------[ cut here ]------------
[    0.651005] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:158!
[    0.657697] Internal error: Oops - BUG: 0 [#1] SMP
[    0.662548] Modules linked in:
[    0.665676] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         5.9.0-rc4+ #4
[    0.673398] Hardware name: Socionext Developer Box (DT)
[    0.678695] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[    0.684338] pc : xen_starting_cpu+0x178/0x180
[    0.688765] lr : xen_starting_cpu+0x144/0x180
[    0.693188] sp : ffff8000116cbb60
[    0.696573] x29: ffff8000116cbb60 x28: ffff80000abec000
[    0.701955] x27: 0000000000000000 x26: 0000000000000000
[    0.707344] x25: ffff80001156c000 x24: fffffdffbfcdb600
[    0.712718] x23: 0000000000000000 x22: 0000000000000000
[    0.718107] x21: ffff8000113a99c8 x20: ffff800010fe4f68
[    0.723481] x19: ffff8000113a9988 x18: 0000000000000010
[    0.728863] x17: 0000000094fe0f81 x16: 00000000deadbeef
[    0.734245] x15: ffffffffffffffff x14: 0720072007200720
[    0.739626] x13: 0720072007200720 x12: 0720072007200720
[    0.745008] x11: 0720072007200720 x10: 0720072007200720
[    0.750390] x9 : ffff8000100fbdc0 x8 : ffff800010715208
[    0.755771] x7 : 0000000000000054 x6 : ffff00001b790f00
[    0.761153] x5 : ffff800010bbf880 x4 : 0000000000000000
[    0.766534] x3 : 0000000000000000 x2 : 00000000deadbeef
[    0.771916] x1 : 00000000deadbeef x0 : ffffffffffffffea
[    0.777304] Call trace:
[    0.779819]  xen_starting_cpu+0x178/0x180
[    0.783898]  cpuhp_invoke_callback+0xac/0x640
[    0.788325]  cpuhp_issue_call+0xf4/0x150
[    0.792317]  __cpuhp_setup_state_cpuslocked+0x128/0x2c8
[    0.797619]  __cpuhp_setup_state+0x84/0xf8
[    0.801779]  xen_guest_init+0x324/0x364
[    0.805683]  do_one_initcall+0x54/0x250
[    0.809590]  kernel_init_freeable+0x12c/0x2c8
[    0.814016]  kernel_init+0x1c/0x128
[    0.817583]  ret_from_fork+0x10/0x18
[    0.821226] Code: d0006980 f9427c00 cb000300 17ffffea (d4210000)
[    0.827415] ---[ end trace d95b5309a33f8b28 ]---
[    0.832076] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.839815] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/160196697165.60224.17470743378683334995.stgit@devnote2
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/xen/enlighten.c | 2 +-
 include/xen/arm/page.h   | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index e93145d72c26e..a6ab3689b2f4a 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -150,7 +150,7 @@ static int xen_starting_cpu(unsigned int cpu)
 	pr_info("Xen: initializing cpu%d\n", cpu);
 	vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
 
-	info.mfn = virt_to_gfn(vcpup);
+	info.mfn = percpu_to_gfn(vcpup);
 	info.offset = xen_offset_in_page(vcpup);
 
 	err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, xen_vcpu_nr(cpu),
diff --git a/include/xen/arm/page.h b/include/xen/arm/page.h
index d7f6af50e200b..0bd3967f6df1e 100644
--- a/include/xen/arm/page.h
+++ b/include/xen/arm/page.h
@@ -79,6 +79,9 @@ static inline unsigned long bfn_to_pfn(unsigned long bfn)
 #define virt_to_gfn(v)		(pfn_to_gfn(virt_to_phys(v) >> XEN_PAGE_SHIFT))
 #define gfn_to_virt(m)		(__va(gfn_to_pfn(m) << XEN_PAGE_SHIFT))
 
+#define percpu_to_gfn(v)	\
+	(pfn_to_gfn(per_cpu_ptr_to_phys(v) >> XEN_PAGE_SHIFT))
+
 /* Only used in PV code. But ARM guests are always HVM. */
 static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
-- 
2.25.1

[PATCH AUTOSEL 5.8 22/24] exfat: fix pointer error checking

[Sasha Levin]

From: Tetsuhiro Kohada <kohada.t2@gmail.com>

[ Upstream commit d6c9efd92443b23307995f34246c2374056ebbd8 ]

Fix missing result check of exfat_build_inode().
And use PTR_ERR_OR_ZERO instead of PTR_ERR.

Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/exfat/namei.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/fs/exfat/namei.c b/fs/exfat/namei.c
index 2b9e21094a96d..4b53a3efd6d46 100644
--- a/fs/exfat/namei.c
+++ b/fs/exfat/namei.c
@@ -578,7 +578,8 @@ static int exfat_create(struct inode *dir, struct dentry *dentry, umode_t mode,
 
 	i_pos = exfat_make_i_pos(&info);
 	inode = exfat_build_inode(sb, &info, i_pos);
-	if (IS_ERR(inode))
+	err = PTR_ERR_OR_ZERO(inode);
+	if (err)
 		goto unlock;
 
 	inode_inc_iversion(inode);
@@ -745,10 +746,9 @@ static struct dentry *exfat_lookup(struct inode *dir, struct dentry *dentry,
 
 	i_pos = exfat_make_i_pos(&info);
 	inode = exfat_build_inode(sb, &info, i_pos);
-	if (IS_ERR(inode)) {
-		err = PTR_ERR(inode);
+	err = PTR_ERR_OR_ZERO(inode);
+	if (err)
 		goto unlock;
-	}
 
 	i_mode = inode->i_mode;
 	alias = d_find_alias(inode);
@@ -890,10 +890,9 @@ static int exfat_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
 
 	i_pos = exfat_make_i_pos(&info);
 	inode = exfat_build_inode(sb, &info, i_pos);
-	if (IS_ERR(inode)) {
-		err = PTR_ERR(inode);
+	err = PTR_ERR_OR_ZERO(inode);
+	if (err)
 		goto unlock;
-	}
 
 	inode_inc_iversion(inode);
 	inode->i_mtime = inode->i_atime = inode->i_ctime =
-- 
2.25.1

[PATCH AUTOSEL 5.8 23/24] gpio: pca953x: Survive spurious interrupts

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 8b81edd80baf12d64420daff1759380aa9a14998 ]

The pca953x driver never checks the result of irq_find_mapping(),
which returns 0 when no mapping is found. When a spurious interrupt
is delivered (which can happen under obscure circumstances), the
kernel explodes as it still tries to handle the error code as
a real interrupt.

Handle this particular case and warn on spurious interrupts.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201005140217.1390851-1-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pca953x.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 11c3bbd105f11..1de182b85e4c4 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -821,8 +821,21 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid)
 	ret = pca953x_irq_pending(chip, pending);
 	mutex_unlock(&chip->i2c_lock);
 
-	for_each_set_bit(level, pending, gc->ngpio)
-		handle_nested_irq(irq_find_mapping(gc->irq.domain, level));
+	if (ret) {
+		ret = 0;
+
+		for_each_set_bit(level, pending, gc->ngpio) {
+			int nested_irq = irq_find_mapping(gc->irq.domain, level);
+
+			if (unlikely(nested_irq <= 0)) {
+				dev_warn_ratelimited(gc->parent, "unmapped interrupt %d\n", level);
+				continue;
+			}
+
+			handle_nested_irq(nested_irq);
+			ret = 1;
+		}
+	}
 
 	return IRQ_RETVAL(ret);
 }
-- 
2.25.1

[PATCH AUTOSEL 5.8 24/24] net: usb: qmi_wwan: add Cellient MPL200 card

[Sasha Levin]

From: Wilken Gottwalt <wilken.gottwalt@mailbox.org>

[ Upstream commit 28802e7c0c9954218d1830f7507edc9d49b03a00 ]

Add usb ids of the Cellient MPL200 card.

Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 07c42c0719f5b..5ca1356b8656f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1375,6 +1375,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
+	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
2.25.1

Re: [PATCH AUTOSEL 5.8 18/24] net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails

[Joe Perches]

On Mon, 2020-10-12 at 15:02 -0400, Sasha Levin wrote:
> From: Anant Thazhemadam <anant.thazhemadam@gmail.com>
> 
> [ Upstream commit f45a4248ea4cc13ed50618ff066849f9587226b2 ]
> 
> When get_registers() fails in set_ethernet_addr(),the uninitialized
> value of node_id gets copied over as the address.
> So, check the return value of get_registers().
> 
> If get_registers() executed successfully (i.e., it returns
> sizeof(node_id)), copy over the MAC address using ether_addr_copy()
> (instead of using memcpy()).
> 
> Else, if get_registers() failed instead, a randomly generated MAC
> address is set as the MAC address instead.

This autosel is premature.

This patch always sets a random MAC.
See the follow on patch: https://lkml.org/lkml/2020/10/11/131
To my knowledge, this follow-ob has yet to be applied:

> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
[]
> @@ -274,12 +274,20 @@ static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
>  		return 1;
>  }
>  
> -static inline void set_ethernet_addr(rtl8150_t * dev)
> +static void set_ethernet_addr(rtl8150_t *dev)
>  {
> -	u8 node_id[6];
> +	u8 node_id[ETH_ALEN];
> +	int ret;
> +
> +	ret = get_registers(dev, IDR, sizeof(node_id), node_id);
>  
> -	get_registers(dev, IDR, sizeof(node_id), node_id);
> -	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
> +	if (ret == sizeof(node_id)) {

So this needs to use
	if (!ret) {

or 
	if (ret < 0)

and reversed code blocks

> +		ether_addr_copy(dev->netdev->dev_addr, node_id);
> +	} else {
> +		eth_hw_addr_random(dev->netdev);
> +		netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n",
> +			      dev->netdev->dev_addr);
> +	}
>  }
>  
>  static int rtl8150_set_mac_address(struct net_device *netdev, void *p)

Re: [PATCH AUTOSEL 5.8 18/24] net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails

[Petko Manolov]

On 20-10-12 12:11:18, Joe Perches wrote:
> On Mon, 2020-10-12 at 15:02 -0400, Sasha Levin wrote:
> > From: Anant Thazhemadam <anant.thazhemadam@gmail.com>
> > 
> > [ Upstream commit f45a4248ea4cc13ed50618ff066849f9587226b2 ]
> > 
> > When get_registers() fails in set_ethernet_addr(),the uninitialized
> > value of node_id gets copied over as the address.
> > So, check the return value of get_registers().
> > 
> > If get_registers() executed successfully (i.e., it returns
> > sizeof(node_id)), copy over the MAC address using ether_addr_copy()
> > (instead of using memcpy()).
> > 
> > Else, if get_registers() failed instead, a randomly generated MAC
> > address is set as the MAC address instead.
> 
> This autosel is premature.
> 
> This patch always sets a random MAC.
> See the follow on patch: https://lkml.org/lkml/2020/10/11/131
> To my knowledge, this follow-ob has yet to be applied:

ACK, the follow-on patch has got the correct semantics.


		Petko


> > diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> []
> > @@ -274,12 +274,20 @@ static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
> >  		return 1;
> >  }
> >  
> > -static inline void set_ethernet_addr(rtl8150_t * dev)
> > +static void set_ethernet_addr(rtl8150_t *dev)
> >  {
> > -	u8 node_id[6];
> > +	u8 node_id[ETH_ALEN];
> > +	int ret;
> > +
> > +	ret = get_registers(dev, IDR, sizeof(node_id), node_id);
> >  
> > -	get_registers(dev, IDR, sizeof(node_id), node_id);
> > -	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
> > +	if (ret == sizeof(node_id)) {
> 
> So this needs to use
> 	if (!ret) {
> 
> or 
> 	if (ret < 0)
> 
> and reversed code blocks
> 
> > +		ether_addr_copy(dev->netdev->dev_addr, node_id);
> > +	} else {
> > +		eth_hw_addr_random(dev->netdev);
> > +		netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n",
> > +			      dev->netdev->dev_addr);
> > +	}
> >  }
> >  
> >  static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
> 
> 

Re: [PATCH AUTOSEL 5.8 18/24] net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails

[Sasha Levin]

On Tue, Oct 13, 2020 at 12:01:06AM +0300, Petko Manolov wrote:
>On 20-10-12 12:11:18, Joe Perches wrote:
>> On Mon, 2020-10-12 at 15:02 -0400, Sasha Levin wrote:
>> > From: Anant Thazhemadam <anant.thazhemadam@gmail.com>
>> >
>> > [ Upstream commit f45a4248ea4cc13ed50618ff066849f9587226b2 ]
>> >
>> > When get_registers() fails in set_ethernet_addr(),the uninitialized
>> > value of node_id gets copied over as the address.
>> > So, check the return value of get_registers().
>> >
>> > If get_registers() executed successfully (i.e., it returns
>> > sizeof(node_id)), copy over the MAC address using ether_addr_copy()
>> > (instead of using memcpy()).
>> >
>> > Else, if get_registers() failed instead, a randomly generated MAC
>> > address is set as the MAC address instead.
>>
>> This autosel is premature.
>>
>> This patch always sets a random MAC.
>> See the follow on patch: https://lkml.org/lkml/2020/10/11/131
>> To my knowledge, this follow-ob has yet to be applied:
>
>ACK, the follow-on patch has got the correct semantics.

I'll hold off on this patch until the follow-on is merged, thanks!

-- 
Thanks,
Sasha