LKML Archive on
 help / color / Atom feed
From: Maxime Ripard <>
To: Corentin Labbe <>
Subject: Re: [PATCH] arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay
Date: Thu, 22 Oct 2020 18:09:59 +0200
Message-ID: <20201022160959.4gmu3r3pjwh7xtlq@gilmour.lan> (raw)
In-Reply-To: <>

[-- Attachment #1: Type: text/plain, Size: 468 bytes --]

On Mon, Oct 19, 2020 at 06:34:49AM +0000, Corentin Labbe wrote:
> Since commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"),
> the network is unusable on PineH64 model A.
> This is due to phy-mode incorrectly set to rgmii instead of rgmii-id.
> Fixes: 729e1ffcf47e ("arm64: allwinner: h6: add support for the Ethernet on Pine H64")
> Signed-off-by: Corentin Labbe <>

Queued as a fix for 5.10, thanks!

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-19  6:34 Corentin Labbe
2020-10-22 16:09 ` Maxime Ripard [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201022160959.4gmu3r3pjwh7xtlq@gilmour.lan \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone