From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: broonie@kernel.org
Cc: perex@perex.cz, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org, plai@codeaurora.org,
spapothi@codeaurora.org, lgirdwood@gmail.com,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v1 0/6] ASoC: codecs: add support for LPASS Codec macros
Date: Mon, 26 Oct 2020 14:19:39 +0000 [thread overview]
Message-ID: <20201026141945.19707-1-srinivas.kandagatla@linaro.org> (raw)
This patchset adds support for two Codec Macro blocks( WSA and VA) available in
Qualcomm LPASS (Low Power Audio SubSystem).
There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block
has specific connectivity like WSA Macros are intended to connect
to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs,
and TX/RX for Analog codecs via SoundWire like other WCD Codecs to provide
headphone/ear/lineout etc ..
Most of the work is derived from downstream Qualcomm kernels.
Credits to various Qualcomm authors from Patrick Lai's team who have
contributed to this code.
This patchset has been tested on support to Qualcomm Robotics RB5 Development
Kit based on QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers
with onboard DMIC connected to internal LPASS codec via WSA and VA macros
respectively.
yaml bindings depend on gfm headers from "clk: qcom : add sm8250 LPASS GFM drivers"
patches posted at
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2352255.html
Thanks,
srini
Srinivas Kandagatla (6):
ASoC: qcom: dt-bindings: add bindings for lpass wsa macro codec
ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro
ASoC: codecs: lpass-wsa-macro: add dapm widgets and route
ASoC: qcom: dt-bindings: add bindings for lpass va macro codec
ASoC: codecs: lpass-va-macro: Add support to VA Macro
ASoC: codecs: lpass-va-macro: add dapm widgets and routes
.../bindings/sound/qcom,lpass-va-macro.yaml | 68 +
.../bindings/sound/qcom,lpass-wsa-macro.yaml | 70 +
sound/soc/codecs/Kconfig | 8 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/lpass-va-macro.c | 1500 ++++++++++
sound/soc/codecs/lpass-wsa-macro.c | 2503 +++++++++++++++++
sound/soc/codecs/lpass-wsa-macro.h | 15 +
7 files changed, 4168 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
create mode 100644 sound/soc/codecs/lpass-va-macro.c
create mode 100644 sound/soc/codecs/lpass-wsa-macro.c
create mode 100644 sound/soc/codecs/lpass-wsa-macro.h
--
2.21.0
next reply other threads:[~2020-10-26 14:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 14:19 Srinivas Kandagatla [this message]
2020-10-26 14:19 ` [PATCH v1 1/6] ASoC: qcom: dt-bindings: add bindings for lpass wsa macro codec Srinivas Kandagatla
2020-10-26 14:19 ` [PATCH v1 2/6] ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro Srinivas Kandagatla
2020-10-26 19:45 ` Pierre-Louis Bossart
2020-10-26 14:19 ` [PATCH v1 3/6] ASoC: codecs: lpass-wsa-macro: add dapm widgets and route Srinivas Kandagatla
2020-10-26 19:58 ` Pierre-Louis Bossart
2020-10-27 10:15 ` Srinivas Kandagatla
2020-10-27 16:14 ` Pierre-Louis Bossart
2020-10-26 14:19 ` [PATCH v1 4/6] ASoC: qcom: dt-bindings: add bindings for lpass va macro codec Srinivas Kandagatla
2020-10-26 14:19 ` [PATCH v1 5/6] ASoC: codecs: lpass-va-macro: Add support to VA Macro Srinivas Kandagatla
2020-10-26 14:19 ` [PATCH v1 6/6] ASoC: codecs: lpass-va-macro: add dapm widgets and routes Srinivas Kandagatla
2020-10-26 20:01 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026141945.19707-1-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=spapothi@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).