From: Rob Herring <robh@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: "Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
"Andy Gross" <agross@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>,
"Martin Botka" <martin.botka1@gmail.com>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pwm@vger.kernel.org
Subject: Re: [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
Date: Mon, 26 Oct 2020 10:02:35 -0500 [thread overview]
Message-ID: <20201026150235.GA140013@bogus> (raw)
In-Reply-To: <20201021201224.3430546-2-bjorn.andersson@linaro.org>
On Wed, Oct 21, 2020 at 01:12:21PM -0700, Bjorn Andersson wrote:
> This adds the binding document describing the three hardware blocks
> related to the Light Pulse Generator found in a wide range of Qualcomm
> PMICs.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v5:
> - None
>
> .../bindings/leds/leds-qcom-lpg.yaml | 170 ++++++++++++++++++
> 1 file changed, 170 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> new file mode 100644
> index 000000000000..5ccf0f3d8f1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> @@ -0,0 +1,170 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Light Pulse Generator
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description: >
> + The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> + a ramp generator with lookup table, the light pulse generator and a three
> + channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,pm8916-pwm
Are the LED properties valid when PWM is used/enabled? The schema
suggests yes, the example suggests no. If not, I think this should be 2
schema docs.
> + - qcom,pm8941-lpg
> + - qcom,pm8994-lpg
> + - qcom,pmi8994-lpg
> + - qcom,pmi8998-lpg
> +
> + "#pwm-cells":
> + const: 2
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + qcom,power-source:
> + $ref: /schemas/types.yaml#definitions/uint32
led-sources can't be made to work for this?
> + description: >
> + power-source used to drive the output, as defined in the datasheet.
> + Should be specified if the TRILED block is present
> + enum:
> + - 0
> + - 1
> + - 3
> +
> + multi-led:
> + type: object
> + $ref: leds-class-multicolor.yaml#
> + properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + "^led@[0-9a-f]$":
> + type: object
> + $ref: common.yaml#
> +
> + properties:
> + "qcom,dtest":
Don't need quotes.
> + $ref: /schemas/types.yaml#definitions/uint32-array
The description sounds like a matrix rather than an array.
> + description: >
> + configures the output into an internal test line of the pmic. Specified
> + by a list of u32 pairs, one pair per channel, where each pair denotes the
> + test line to drive and the second configures how the value should be
> + outputed, as defined in the datasheet
> + minItems: 2
> + maxItems: 2
If so, then you'd want:
items:
minItems: 2
maxItems: 2
> +
> + required:
> + - reg
> +
> +patternProperties:
> + "^led@[0-9a-f]$":
> + type: object
> + $ref: common.yaml#
> + properties:
> + "qcom,dtest":
> + $ref: /schemas/types.yaml#definitions/uint32-array
> + description: >
> + configures the output into an internal test line of the pmic. Specified
> + by a list of u32 pairs, one pair per channel, where each pair denotes the
> + test line to drive and the second configures how the value should be
> + outputed, as defined in the datasheet
> + minItems: 2
> + maxItems: 2
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/leds/common.h>
> +
> + lpg {
> + compatible = "qcom,pmi8994-lpg";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qcom,power-source = <1>;
> +
> + led@1 {
> + reg = <1>;
> + label = "green:user1";
> + };
> +
> + led@2 {
> + reg = <2>;
> + label = "green:user0";
> + default-state = "on";
> + };
> +
> + led@3 {
> + reg = <3>;
> + label = "green:user2";
> + };
> +
> + led@4 {
> + reg = <4>;
> + label = "green:user3";
> +
> + qcom,dtest = <4 1>;
> + };
> + };
> + - |
> + #include <dt-bindings/leds/common.h>
> +
> + lpg {
> + compatible = "qcom,pmi8994-lpg";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qcom,power-source = <1>;
> +
> + multi-led {
> + color = <LED_COLOR_ID_MULTI>;
> + label = "rgb:notification";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_RED>;
> + };
> +
> + led@2 {
> + reg = <2>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@3 {
> + reg = <3>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> + };
> + - |
> + lpg {
> + compatible = "qcom,pm8916-pwm";
> + #pwm-cells = <2>;
> + };
> +...
> --
> 2.28.0
>
next prev parent reply other threads:[~2020-10-26 15:02 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-21 20:12 [PATCH v6 0/4] Qualcomm Light Pulse Generator Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding Bjorn Andersson
2020-10-26 15:02 ` Rob Herring [this message]
2020-10-21 20:12 ` [PATCH v6 2/4] leds: Add driver for Qualcomm LPG Bjorn Andersson
2020-10-22 19:25 ` Luca Weiss
2020-10-29 18:13 ` Pavel Machek
2021-04-29 0:12 ` Bjorn Andersson
2021-04-29 21:12 ` Pavel Machek
2021-04-29 21:29 ` Bjorn Andersson
2021-05-04 15:43 ` Pavel Machek
2021-05-04 16:13 ` Bjorn Andersson
2021-05-05 5:21 ` Uwe Kleine-König
2021-04-18 21:54 ` Marijn Suijten
2021-04-28 22:39 ` Bjorn Andersson
2021-04-29 19:31 ` Marijn Suijten
2021-04-29 20:54 ` Bjorn Andersson
2021-05-05 5:15 ` Uwe Kleine-König
2021-05-05 5:19 ` Uwe Kleine-König
2021-05-13 17:43 ` Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 4/4] arm64: dts: qcom: Add user LEDs on db820c Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026150235.GA140013@bogus \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.botka1@gmail.com \
--cc=pavel@ucw.cz \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).