From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>,
Jason Gunthorpe <jgg@nvidia.com>,
gregkh <gregkh@linuxfoundation.org>
Cc: Leon Romanovsky <leonro@nvidia.com>,
Jakub Kicinski <kuba@kernel.org>,
Jason Wang <jasowang@redhat.com>,
linux-rdma@vger.kernel.org, "Michael S. Tsirkin" <mst@redhat.com>,
netdev@vger.kernel.org, Parav Pandit <parav@nvidia.com>,
Roi Dayan <roid@nvidia.com>, Saeed Mahameed <saeedm@nvidia.com>,
virtualization@lists.linux-foundation.org,
alsa-devel@alsa-project.org, tiwai@suse.de, broonie@kernel.org,
"David S . Miller" <davem@davemloft.net>,
ranjani.sridharan@linux.intel.com,
pierre-louis.bossart@linux.intel.com, fred.oh@linux.intel.com,
shiraz.saleem@intel.com, dan.j.williams@intel.com,
kiran.patil@intel.com, linux-kernel@vger.kernel.org
Subject: [PATCH mlx5-next v1 06/11] vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
Date: Sun, 1 Nov 2020 22:15:37 +0200 [thread overview]
Message-ID: <20201101201542.2027568-7-leon@kernel.org> (raw)
In-Reply-To: <20201101201542.2027568-1-leon@kernel.org>
From: Leon Romanovsky <leonro@nvidia.com>
Change module registration logic to use auxiliary bus instead of custom
made mlx5 register interface.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/dev.c | 28 ++++++-
drivers/vdpa/mlx5/Makefile | 2 +-
drivers/vdpa/mlx5/net/main.c | 76 -------------------
drivers/vdpa/mlx5/net/mlx5_vnet.c | 51 +++++++++++--
drivers/vdpa/mlx5/net/mlx5_vnet.h | 24 ------
5 files changed, 72 insertions(+), 109 deletions(-)
delete mode 100644 drivers/vdpa/mlx5/net/main.c
delete mode 100644 drivers/vdpa/mlx5/net/mlx5_vnet.h
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
index 8ddf469b2d05..76eb09f4adba 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -31,6 +31,7 @@
*/
#include <linux/mlx5/driver.h>
+#include <linux/mlx5/mlx5_ifc_vdpa.h>
#include "mlx5_core.h"
static LIST_HEAD(intf_list);
@@ -51,10 +52,35 @@ enum {
MLX5_INTERFACE_ATTACHED,
};
+static bool is_vnet_supported(struct mlx5_core_dev *dev)
+{
+ if (!IS_ENABLED(CONFIG_MLX5_VDPA_NET))
+ return false;
+
+ if (mlx5_core_is_pf(dev))
+ return false;
+
+ if (!(MLX5_CAP_GEN_64(dev, general_obj_types) &
+ MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_NET_Q))
+ return false;
+
+ if (!(MLX5_CAP_DEV_VDPA_EMULATION(dev, event_mode) &
+ MLX5_VIRTIO_Q_EVENT_MODE_QP_MODE))
+ return false;
+
+ if (!MLX5_CAP_DEV_VDPA_EMULATION(dev, eth_frame_offload_type))
+ return false;
+
+ return true;
+}
+
static const struct mlx5_adev_device {
const char *suffix;
bool (*is_supported)(struct mlx5_core_dev *dev);
-} mlx5_adev_devices[1] = {};
+} mlx5_adev_devices[] = {
+ [MLX5_INTERFACE_PROTOCOL_VDPA] = { .suffix = "vnet",
+ .is_supported = &is_vnet_supported },
+};
int mlx5_adev_idx_alloc(void)
{
diff --git a/drivers/vdpa/mlx5/Makefile b/drivers/vdpa/mlx5/Makefile
index 89a5bededc9f..f717978c83bf 100644
--- a/drivers/vdpa/mlx5/Makefile
+++ b/drivers/vdpa/mlx5/Makefile
@@ -1,4 +1,4 @@
subdir-ccflags-y += -I$(srctree)/drivers/vdpa/mlx5/core
obj-$(CONFIG_MLX5_VDPA_NET) += mlx5_vdpa.o
-mlx5_vdpa-$(CONFIG_MLX5_VDPA_NET) += net/main.o net/mlx5_vnet.o core/resources.o core/mr.o
+mlx5_vdpa-$(CONFIG_MLX5_VDPA_NET) += net/mlx5_vnet.o core/resources.o core/mr.o
diff --git a/drivers/vdpa/mlx5/net/main.c b/drivers/vdpa/mlx5/net/main.c
deleted file mode 100644
index 4dd3f00f2306..000000000000
--- a/drivers/vdpa/mlx5/net/main.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
-/* Copyright (c) 2020 Mellanox Technologies Ltd. */
-
-#include <linux/module.h>
-#include <linux/mlx5/driver.h>
-#include <linux/mlx5/device.h>
-#include <linux/mlx5/mlx5_ifc_vdpa.h>
-#include "mlx5_vnet.h"
-
-MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
-MODULE_DESCRIPTION("Mellanox VDPA driver");
-MODULE_LICENSE("Dual BSD/GPL");
-
-static bool required_caps_supported(struct mlx5_core_dev *mdev)
-{
- u8 event_mode;
- u64 got;
-
- got = MLX5_CAP_GEN_64(mdev, general_obj_types);
-
- if (!(got & MLX5_GENERAL_OBJ_TYPES_CAP_VIRTIO_NET_Q))
- return false;
-
- event_mode = MLX5_CAP_DEV_VDPA_EMULATION(mdev, event_mode);
- if (!(event_mode & MLX5_VIRTIO_Q_EVENT_MODE_QP_MODE))
- return false;
-
- if (!MLX5_CAP_DEV_VDPA_EMULATION(mdev, eth_frame_offload_type))
- return false;
-
- return true;
-}
-
-static void *mlx5_vdpa_add(struct mlx5_core_dev *mdev)
-{
- struct mlx5_vdpa_dev *vdev;
-
- if (mlx5_core_is_pf(mdev))
- return NULL;
-
- if (!required_caps_supported(mdev)) {
- dev_info(mdev->device, "virtio net emulation not supported\n");
- return NULL;
- }
- vdev = mlx5_vdpa_add_dev(mdev);
- if (IS_ERR(vdev))
- return NULL;
-
- return vdev;
-}
-
-static void mlx5_vdpa_remove(struct mlx5_core_dev *mdev, void *context)
-{
- struct mlx5_vdpa_dev *vdev = context;
-
- mlx5_vdpa_remove_dev(vdev);
-}
-
-static struct mlx5_interface mlx5_vdpa_interface = {
- .add = mlx5_vdpa_add,
- .remove = mlx5_vdpa_remove,
- .protocol = MLX5_INTERFACE_PROTOCOL_VDPA,
-};
-
-static int __init mlx5_vdpa_init(void)
-{
- return mlx5_register_interface(&mlx5_vdpa_interface);
-}
-
-static void __exit mlx5_vdpa_exit(void)
-{
- mlx5_unregister_interface(&mlx5_vdpa_interface);
-}
-
-module_init(mlx5_vdpa_init);
-module_exit(mlx5_vdpa_exit);
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 6c218b47b9f1..5316e51e72d4 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -1,18 +1,27 @@
// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
/* Copyright (c) 2020 Mellanox Technologies Ltd. */
+#include <linux/module.h>
#include <linux/vdpa.h>
+#include <linux/vringh.h>
+#include <uapi/linux/virtio_net.h>
#include <uapi/linux/virtio_ids.h>
#include <linux/virtio_config.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/mlx5/cq.h>
#include <linux/mlx5/qp.h>
#include <linux/mlx5/device.h>
+#include <linux/mlx5/driver.h>
#include <linux/mlx5/vport.h>
#include <linux/mlx5/fs.h>
-#include <linux/mlx5/device.h>
#include <linux/mlx5/mlx5_ifc_vdpa.h>
-#include "mlx5_vnet.h"
#include "mlx5_vdpa.h"
+MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox VDPA driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+#define to_mlx5_vdpa_ndev(__mvdev) container_of(__mvdev, struct mlx5_vdpa_net, mvdev)
#define to_mvdev(__vdev) container_of((__vdev), struct mlx5_vdpa_dev, vdev)
#define VALID_FEATURES_MASK \
@@ -159,6 +168,11 @@ static bool mlx5_vdpa_debug;
mlx5_vdpa_info(mvdev, "%s\n", #_status); \
} while (0)
+static inline u32 mlx5_vdpa_max_qps(int max_vqs)
+{
+ return max_vqs / 2;
+}
+
static void print_status(struct mlx5_vdpa_dev *mvdev, u8 status, bool set)
{
if (status & ~VALID_STATUS_MASK)
@@ -1928,8 +1942,11 @@ static void init_mvqs(struct mlx5_vdpa_net *ndev)
}
}
-void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
+static int mlx5v_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
{
+ struct mlx5_adev *madev = container_of(adev, struct mlx5_adev, adev);
+ struct mlx5_core_dev *mdev = madev->mdev;
struct virtio_net_config *config;
struct mlx5_vdpa_dev *mvdev;
struct mlx5_vdpa_net *ndev;
@@ -1943,7 +1960,7 @@ void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
ndev = vdpa_alloc_device(struct mlx5_vdpa_net, mvdev.vdev, mdev->device, &mlx5_vdpa_ops,
2 * mlx5_vdpa_max_qps(max_vqs));
if (IS_ERR(ndev))
- return ndev;
+ return PTR_ERR(ndev);
ndev->mvdev.max_vqs = max_vqs;
mvdev = &ndev->mvdev;
@@ -1972,7 +1989,8 @@ void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
if (err)
goto err_reg;
- return ndev;
+ dev_set_drvdata(&adev->dev, ndev);
+ return 0;
err_reg:
free_resources(ndev);
@@ -1981,10 +1999,29 @@ void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev)
err_mtu:
mutex_destroy(&ndev->reslock);
put_device(&mvdev->vdev.dev);
- return ERR_PTR(err);
+ return err;
}
-void mlx5_vdpa_remove_dev(struct mlx5_vdpa_dev *mvdev)
+static int mlx5v_remove(struct auxiliary_device *adev)
{
+ struct mlx5_vdpa_dev *mvdev = dev_get_drvdata(&adev->dev);
+
vdpa_unregister_device(&mvdev->vdev);
+ return 0;
}
+
+static const struct auxiliary_device_id mlx5v_id_table[] = {
+ { .name = MLX5_ADEV_NAME ".vnet", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(auxiliary, mlx5v_id_table);
+
+static struct auxiliary_driver mlx5v_driver = {
+ .name = "vnet",
+ .probe = mlx5v_probe,
+ .remove = mlx5v_remove,
+ .id_table = mlx5v_id_table,
+};
+
+module_auxiliary_driver(mlx5v_driver);
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.h b/drivers/vdpa/mlx5/net/mlx5_vnet.h
deleted file mode 100644
index f2d6d68b020e..000000000000
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
-/* Copyright (c) 2020 Mellanox Technologies Ltd. */
-
-#ifndef __MLX5_VNET_H_
-#define __MLX5_VNET_H_
-
-#include <linux/vdpa.h>
-#include <linux/virtio_net.h>
-#include <linux/vringh.h>
-#include <linux/mlx5/driver.h>
-#include <linux/mlx5/cq.h>
-#include <linux/mlx5/qp.h>
-#include "mlx5_vdpa.h"
-
-static inline u32 mlx5_vdpa_max_qps(int max_vqs)
-{
- return max_vqs / 2;
-}
-
-#define to_mlx5_vdpa_ndev(__mvdev) container_of(__mvdev, struct mlx5_vdpa_net, mvdev)
-void *mlx5_vdpa_add_dev(struct mlx5_core_dev *mdev);
-void mlx5_vdpa_remove_dev(struct mlx5_vdpa_dev *mvdev);
-
-#endif /* __MLX5_VNET_H_ */
--
2.28.0
next prev parent reply other threads:[~2020-11-01 20:16 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-01 20:15 [PATCH mlx5-next v1 00/11] Convert mlx5 to use auxiliary bus Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 01/11] net/mlx5: Don't skip vport check Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 02/11] net/mlx5: Properly convey driver version to firmware Leon Romanovsky
2020-11-02 14:47 ` Roi Dayan
2020-11-01 20:15 ` [PATCH mlx5-next v1 03/11] net/mlx5_core: Clean driver version and name Leon Romanovsky
2020-11-02 5:07 ` Parav Pandit
2020-11-02 5:56 ` Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 04/11] vdpa/mlx5: Make hardware definitions visible to all mlx5 devices Leon Romanovsky
2020-11-05 20:31 ` Saeed Mahameed
2020-11-05 20:36 ` Jason Gunthorpe
2020-11-06 7:05 ` Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 05/11] net/mlx5: Register mlx5 devices to auxiliary virtual bus Leon Romanovsky
2020-11-05 20:59 ` Saeed Mahameed
2020-11-05 21:09 ` Jason Gunthorpe
2020-11-06 6:56 ` Leon Romanovsky
2020-11-01 20:15 ` Leon Romanovsky [this message]
2020-11-03 15:45 ` [PATCH mlx5-next v1 06/11] vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus Jason Gunthorpe
2020-11-04 23:21 ` Dan Williams
2020-11-05 7:33 ` gregkh
2020-11-05 7:49 ` Dan Williams
2020-11-05 16:47 ` Jason Gunthorpe
2020-11-05 16:57 ` gregkh
2020-11-01 20:15 ` [PATCH mlx5-next v1 07/11] net/mlx5e: Connect ethernet part " Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 08/11] RDMA/mlx5: Convert mlx5_ib to use " Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 09/11] net/mlx5: Delete custom device management logic Leon Romanovsky
2020-11-01 20:15 ` [PATCH mlx5-next v1 10/11] net/mlx5: Simplify eswitch mode check Leon Romanovsky
2020-11-02 14:54 ` Roi Dayan
2020-11-01 20:15 ` [PATCH mlx5-next v1 11/11] RDMA/mlx5: Remove IB representors dead code Leon Romanovsky
2020-11-03 7:10 ` Roi Dayan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201101201542.2027568-7-leon@kernel.org \
--to=leon@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=fred.oh@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jasowang@redhat.com \
--cc=jgg@nvidia.com \
--cc=kiran.patil@intel.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=parav@nvidia.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=roid@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=shiraz.saleem@intel.com \
--cc=tiwai@suse.de \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).