From: Maxime Ripard <maxime@cerno.tech>
To: Matteo Scordino <matteo.scordino@gmail.com>
Cc: wens@csie.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/6] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM
Date: Mon, 2 Nov 2020 11:05:40 +0100 [thread overview]
Message-ID: <20201102100540.wkqoy4nilmee7mpv@gilmour.lan> (raw)
In-Reply-To: <20201030234325.5865-4-matteo.scordino@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2088 bytes --]
Hi!
On Fri, Oct 30, 2020 at 11:43:22PM +0000, Matteo Scordino wrote:
> The Elimo Engineering Impetus is an Open Source Hardware System-on-Module
> based on the SoChip S3 SoC.
>
> It is meant for integration into carrier boards or, more generally,
> larger designs, and uses an M2 connector to facilitate that.
>
> Interfaces on the M.2/NGFF 42mm connector:
> WiFi IEEE 802. 11abgn (on-module Realtek)
> Bluetooth 4.2/BLE (on-module Realtek)
> RGB LCD Interface (on-module connector)
> MIPI Camera Interface (on-module connector)
> IEEE 802. 3u Ethernet MAC (external connecto)
> USB2.0 (Host, Device, OTG) (external connector)
> Audio Line In/Out (external connector)
>
> Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> new file mode 100644
> index 000000000000..f219188fc9ba
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-v3.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +/ {
> + model = "Elimo Impetus SoM";
> + compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&mmc0 {
> + broken-cd;
> + bus-width = <4>;
> + vmmc-supply = <®_vcc3v3>;
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pb_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pg_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
What is uart1 used for? the BT chip?
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2020-11-02 10:05 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-29 2:19 [PATCH 0/5] Elimo Impetus and Initium support Matteo Scordino
2020-10-29 2:19 ` [PATCH 1/5] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-10-29 10:05 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 2/5] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Matteo Scordino
2020-10-29 10:04 ` Paul Kocialkowski
2020-10-29 2:19 ` [PATCH 3/5] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-10-29 10:09 ` Paul Kocialkowski
2020-10-30 0:18 ` Matteo Scordino
2020-10-29 2:19 ` [PATCH 4/5] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-29 10:13 ` Maxime Ripard
2020-10-29 10:24 ` Icenowy Zheng
2020-10-30 0:24 ` Matteo Scordino
2020-10-30 10:33 ` Icenowy Zheng
2020-10-29 2:20 ` [PATCH 5/5] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-10-29 10:10 ` Paul Kocialkowski
2020-10-30 0:26 ` Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 0/6] Elimo Impetus and Initium support - rework Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 1/6] dt-bindings: vendors: add Elimo Engineering vendor prefix Matteo Scordino
2020-11-02 10:02 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 2/6] ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi Matteo Scordino
2020-11-02 10:03 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 3/6] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-02 10:05 ` Maxime Ripard [this message]
2020-11-03 16:28 ` Matteo Scordino
2020-11-04 19:04 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 4/6] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-10-30 23:43 ` [PATCH v2 5/6] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-02 10:06 ` Maxime Ripard
2020-11-03 16:33 ` Matteo Scordino
2020-11-04 19:05 ` Maxime Ripard
2020-10-30 23:43 ` [PATCH v2 6/6] ARM: dts: sunxi: align pinecube compatible property to other S3 boards Matteo Scordino
2020-11-02 10:07 ` Maxime Ripard
2020-11-05 14:49 ` [PATCH v3 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 14:49 ` [PATCH v3 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-05 15:00 ` Maxime Ripard
2020-11-05 18:29 ` Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 0/3] Elimo Impetus and Initium support Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 1/3] ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 2/3] dt-bindings: arm: sunxi: add Elimo bindings Matteo Scordino
2020-11-05 18:32 ` [PATCH v4 3/3] ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC Matteo Scordino
2020-11-06 10:47 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201102100540.wkqoy4nilmee7mpv@gilmour.lan \
--to=maxime@cerno.tech \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.scordino@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).