The variable 'tmp' is used multiple times in the brcm_pcie_setup() function. One such usage did not initialize 'tmp' to the current value of the target register. By luck the mistake does not currently affect behavior; regardless 'tmp' is now initialized properly. Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Suggested-by: Rafał Miłecki Signed-off-by: Jim Quinlan --- drivers/pci/controller/pcie-brcmstb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index bea86899bd5d..9c3d2982248d 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -893,6 +893,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) burst = 0x2; /* 512 bytes */ /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */ + tmp = readl(base + PCIE_MISC_MISC_CTRL); u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK); u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK); u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK); -- 2.17.1