linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Siddharth Gupta <sidgup@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/4] remoteproc: sysmon: Expose the shutdown result
Date: Wed,  4 Nov 2020 20:50:49 -0800	[thread overview]
Message-ID: <20201105045051.1365780-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20201105045051.1365780-1-bjorn.andersson@linaro.org>

A graceful shutdown of the Qualcomm remote processors where
traditionally performed by invoking a shared memory state signal and
waiting for the associated ack.

This was later superseded by the "sysmon" mechanism, where some form of
shared memory bus is used to send a "graceful shutdown request" message
and one of more signals comes back to indicate its success.

But when this newer mechanism is in effect the firmware is shut down by
the time the older mechanism, implemented in the remoteproc drivers,
attempts to perform a graceful shutdown - and as such it will never
receive an ack back.

This patch therefor track the success of the latest shutdown attempt in
sysmon and exposes a new function in the API that the remoteproc driver
can use to query the success and the necessity of invoking the older
mechanism.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- New patch

 drivers/remoteproc/qcom_common.h |  6 +++
 drivers/remoteproc/qcom_sysmon.c | 82 ++++++++++++++++++++++++--------
 2 files changed, 69 insertions(+), 19 deletions(-)

diff --git a/drivers/remoteproc/qcom_common.h b/drivers/remoteproc/qcom_common.h
index dfc641c3a98b..8ba9052955bd 100644
--- a/drivers/remoteproc/qcom_common.h
+++ b/drivers/remoteproc/qcom_common.h
@@ -51,6 +51,7 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 					   const char *name,
 					   int ssctl_instance);
 void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon);
+bool qcom_sysmon_shutdown_acked(struct qcom_sysmon *sysmon);
 #else
 static inline struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 							 const char *name,
@@ -62,6 +63,11 @@ static inline struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
 static inline void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon)
 {
 }
+
+static inline bool qcom_sysmon_shutdown_acked(struct qcom_sysmon *sysmon)
+{
+	return false;
+}
 #endif
 
 #endif
diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
index 38f63c968fa8..1c42f00010d3 100644
--- a/drivers/remoteproc/qcom_sysmon.c
+++ b/drivers/remoteproc/qcom_sysmon.c
@@ -44,6 +44,7 @@ struct qcom_sysmon {
 	struct mutex lock;
 
 	bool ssr_ack;
+	bool shutdown_acked;
 
 	struct qmi_handle qmi;
 	struct sockaddr_qrtr ssctl;
@@ -115,10 +116,13 @@ static void sysmon_send_event(struct qcom_sysmon *sysmon,
 /**
  * sysmon_request_shutdown() - request graceful shutdown of remote
  * @sysmon:	sysmon context
+ *
+ * Return: boolean indicator of the remote processor acking the request
  */
-static void sysmon_request_shutdown(struct qcom_sysmon *sysmon)
+static bool sysmon_request_shutdown(struct qcom_sysmon *sysmon)
 {
 	char *req = "ssr:shutdown";
+	bool acked = false;
 	int ret;
 
 	mutex_lock(&sysmon->lock);
@@ -141,9 +145,13 @@ static void sysmon_request_shutdown(struct qcom_sysmon *sysmon)
 	if (!sysmon->ssr_ack)
 		dev_err(sysmon->dev,
 			"unexpected response to sysmon shutdown request\n");
+	else
+		acked = true;
 
 out_unlock:
 	mutex_unlock(&sysmon->lock);
+
+	return acked;
 }
 
 static int sysmon_callback(struct rpmsg_device *rpdev, void *data, int count,
@@ -297,14 +305,33 @@ static struct qmi_msg_handler qmi_indication_handler[] = {
 	{}
 };
 
+static bool ssctl_request_shutdown_wait(struct qcom_sysmon *sysmon)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&sysmon->shutdown_comp, 10 * HZ);
+	if (ret)
+		return true;
+
+	ret = try_wait_for_completion(&sysmon->ind_comp);
+	if (ret)
+		return true;
+
+	dev_err(sysmon->dev, "timeout waiting for shutdown ack\n");
+	return false;
+}
+
 /**
  * ssctl_request_shutdown() - request shutdown via SSCTL QMI service
  * @sysmon:	sysmon context
+ *
+ * Return: boolean indicator of the remote processor acking the request
  */
-static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
+static bool ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 {
 	struct ssctl_shutdown_resp resp;
 	struct qmi_txn txn;
+	bool acked = false;
 	int ret;
 
 	reinit_completion(&sysmon->ind_comp);
@@ -312,7 +339,7 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 	ret = qmi_txn_init(&sysmon->qmi, &txn, ssctl_shutdown_resp_ei, &resp);
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to allocate QMI txn\n");
-		return;
+		return false;
 	}
 
 	ret = qmi_send_request(&sysmon->qmi, &sysmon->ssctl, &txn,
@@ -320,27 +347,23 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
 	if (ret < 0) {
 		dev_err(sysmon->dev, "failed to send shutdown request\n");
 		qmi_txn_cancel(&txn);
-		return;
+		return false;
 	}
 
 	ret = qmi_txn_wait(&txn, 5 * HZ);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(sysmon->dev, "failed receiving QMI response\n");
-	else if (resp.resp.result)
+	} else if (resp.resp.result) {
 		dev_err(sysmon->dev, "shutdown request failed\n");
-	else
+	} else {
 		dev_dbg(sysmon->dev, "shutdown request completed\n");
-
-	if (sysmon->shutdown_irq > 0) {
-		ret = wait_for_completion_timeout(&sysmon->shutdown_comp,
-						  10 * HZ);
-		if (!ret) {
-			ret = try_wait_for_completion(&sysmon->ind_comp);
-			if (!ret)
-				dev_err(sysmon->dev,
-					"timeout waiting for shutdown ack\n");
-		}
+		acked = true;
 	}
+
+	if (sysmon->shutdown_irq > 0)
+		return ssctl_request_shutdown_wait(sysmon);
+
+	return acked;
 }
 
 /**
@@ -508,6 +531,9 @@ static void sysmon_stop(struct rproc_subdev *subdev, bool crashed)
 		.subsys_name = sysmon->name,
 		.ssr_event = SSCTL_SSR_EVENT_BEFORE_SHUTDOWN
 	};
+	bool acked;
+
+	sysmon->shutdown_acked = false;
 
 	mutex_lock(&sysmon->state_lock);
 	sysmon->state = SSCTL_SSR_EVENT_BEFORE_SHUTDOWN;
@@ -519,9 +545,11 @@ static void sysmon_stop(struct rproc_subdev *subdev, bool crashed)
 		return;
 
 	if (sysmon->ssctl_version)
-		ssctl_request_shutdown(sysmon);
+		acked = ssctl_request_shutdown(sysmon);
 	else if (sysmon->ept)
-		sysmon_request_shutdown(sysmon);
+		acked = sysmon_request_shutdown(sysmon);
+
+	sysmon->shutdown_acked = acked;
 }
 
 static void sysmon_unprepare(struct rproc_subdev *subdev)
@@ -679,6 +707,22 @@ void qcom_remove_sysmon_subdev(struct qcom_sysmon *sysmon)
 }
 EXPORT_SYMBOL_GPL(qcom_remove_sysmon_subdev);
 
+/**
+ * qcom_sysmon_shutdown_acked() - query the success of the last shutdown
+ * @sysmon:	sysmon context
+ *
+ * When sysmon is used to request a graceful shutdown of the remote processor
+ * this can be used by the remoteproc driver to query the success, in order to
+ * know if it should fall back to other means of requesting a shutdown.
+ *
+ * Return: boolean indicator of the success of the last shutdown request
+ */
+bool qcom_sysmon_shutdown_acked(struct qcom_sysmon *sysmon)
+{
+	return sysmon && sysmon->shutdown_acked;
+}
+EXPORT_SYMBOL_GPL(qcom_sysmon_shutdown_acked);
+
 /**
  * sysmon_probe() - probe sys_mon channel
  * @rpdev:	rpmsg device handle
-- 
2.28.0


  parent reply	other threads:[~2020-11-05  4:50 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-05  4:50 [PATCH v2 0/4] remoteproc: Improvement for the Qualcomm sysmon Bjorn Andersson
2020-11-05  4:50 ` [PATCH v2 1/4] remoteproc: sysmon: Ensure remote notification ordering Bjorn Andersson
2020-11-11  0:57   ` rishabhb
2020-11-11  5:40     ` Bjorn Andersson
2020-11-05  4:50 ` Bjorn Andersson [this message]
2020-11-11  1:01   ` [PATCH v2 2/4] remoteproc: sysmon: Expose the shutdown result rishabhb
2020-11-05  4:50 ` [PATCH v2 3/4] remoteproc: qcom: q6v5: Query sysmon before graceful shutdown Bjorn Andersson
2020-11-11  1:03   ` rishabhb
2020-11-05  4:50 ` [PATCH v2 4/4] remoteproc: sysmon: Improve error messages Bjorn Andersson
2020-11-11  1:04   ` rishabhb
2020-11-12 18:00 ` [PATCH v2 0/4] remoteproc: Improvement for the Qualcomm sysmon Steev Klimaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201105045051.1365780-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sibis@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).