From: Naveen Mamindlapalli <naveenm@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kuba@kernel.org>, <davem@davemloft.net>, <saeed@kernel.org>,
<sgoutham@marvell.com>, <lcherian@marvell.com>,
<gakula@marvell.com>, <jerinj@marvell.com>, <sbhatta@marvell.com>,
<hkelam@marvell.com>
Subject: [PATCH v3 net-next 01/13] octeontx2-af: Modify default KEX profile to extract TX packet fields
Date: Wed, 11 Nov 2020 12:43:52 +0530 [thread overview]
Message-ID: <20201111071404.29620-2-naveenm@marvell.com> (raw)
In-Reply-To: <20201111071404.29620-1-naveenm@marvell.com>
From: Stanislaw Kardach <skardach@marvell.com>
The current default Key Extraction(KEX) profile can only use RX
packet fields while generating the MCAM search key. The profile
can't be used for matching TX packet fields. This patch modifies
the default KEX profile to add support for extracting TX packet
fields into MCAM search key. Enabled Tx KPU packet parsing by
configuring TX PKIND in tx_parse_cfg.
Also modified the default KEX profile to extract VLAN TCI from
the LB_PTR and exact byte offset of VLAN header. The NPC KPU
parser was modified to point LB_PTR to the starting byte offset
of VLAN header which points to the tpid field.
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
---
.../ethernet/marvell/octeontx2/af/npc_profile.h | 71 ++++++++++++++++++++--
.../net/ethernet/marvell/octeontx2/af/rvu_nix.c | 6 ++
2 files changed, 72 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
index 199448610e3e..c5b13385c81d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h
@@ -13386,8 +13386,8 @@ static struct npc_mcam_kex npc_mkex_default = {
.kpu_version = NPC_KPU_PROFILE_VER,
.keyx_cfg = {
/* nibble: LA..LE (ltype only) + Channel */
- [NIX_INTF_RX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x49247,
- [NIX_INTF_TX] = ((u64)NPC_MCAM_KEY_X2 << 32) | ((1ULL << 19) - 1),
+ [NIX_INTF_RX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x249207,
+ [NIX_INTF_TX] = ((u64)NPC_MCAM_KEY_X2 << 32) | 0x249200,
},
.intf_lid_lt_ld = {
/* Default RX MCAM KEX profile */
@@ -13405,12 +13405,14 @@ static struct npc_mcam_kex npc_mkex_default = {
/* Layer B: Single VLAN (CTAG) */
/* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
[NPC_LT_LB_CTAG] = {
- KEX_LD_CFG(0x03, 0x0, 0x1, 0x0, 0x4),
+ KEX_LD_CFG(0x03, 0x2, 0x1, 0x0, 0x4),
},
/* Layer B: Stacked VLAN (STAG|QinQ) */
[NPC_LT_LB_STAG_QINQ] = {
- /* CTAG VLAN[2..3] + Ethertype, 4 bytes, KW0[63:32] */
- KEX_LD_CFG(0x03, 0x4, 0x1, 0x0, 0x4),
+ /* Outer VLAN: 2 bytes, KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* Ethertype: 2 bytes, KW0[47:32] */
+ KEX_LD_CFG(0x01, 0x8, 0x1, 0x0, 0x4),
},
[NPC_LT_LB_FDSA] = {
/* SWITCH PORT: 1 byte, KW0[63:48] */
@@ -13450,6 +13452,65 @@ static struct npc_mcam_kex npc_mkex_default = {
},
},
},
+
+ /* Default TX MCAM KEX profile */
+ [NIX_INTF_TX] = {
+ [NPC_LID_LA] = {
+ /* Layer A: Ethernet: */
+ [NPC_LT_LA_IH_NIX_ETHER] = {
+ /* PF_FUNC: 2B , KW0 [47:32] */
+ KEX_LD_CFG(0x01, 0x0, 0x1, 0x0, 0x4),
+ /* DMAC: 6 bytes, KW1[63:16] */
+ KEX_LD_CFG(0x05, 0x8, 0x1, 0x0, 0xa),
+ },
+ },
+ [NPC_LID_LB] = {
+ /* Layer B: Single VLAN (CTAG) */
+ [NPC_LT_LB_CTAG] = {
+ /* CTAG VLAN[2..3] KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* CTAG VLAN[2..3] KW1[15:0] */
+ KEX_LD_CFG(0x01, 0x4, 0x1, 0x0, 0x8),
+ },
+ /* Layer B: Stacked VLAN (STAG|QinQ) */
+ [NPC_LT_LB_STAG_QINQ] = {
+ /* Outer VLAN: 2 bytes, KW0[63:48] */
+ KEX_LD_CFG(0x01, 0x2, 0x1, 0x0, 0x6),
+ /* Outer VLAN: 2 Bytes, KW1[15:0] */
+ KEX_LD_CFG(0x01, 0x8, 0x1, 0x0, 0x8),
+ },
+ },
+ [NPC_LID_LC] = {
+ /* Layer C: IPv4 */
+ [NPC_LT_LC_IP] = {
+ /* SIP+DIP: 8 bytes, KW2[63:0] */
+ KEX_LD_CFG(0x07, 0xc, 0x1, 0x0, 0x10),
+ /* TOS: 1 byte, KW1[63:56] */
+ KEX_LD_CFG(0x0, 0x1, 0x1, 0x0, 0xf),
+ },
+ /* Layer C: IPv6 */
+ [NPC_LT_LC_IP6] = {
+ /* Everything up to SADDR: 8 bytes, KW2[63:0] */
+ KEX_LD_CFG(0x07, 0x0, 0x1, 0x0, 0x10),
+ },
+ },
+ [NPC_LID_LD] = {
+ /* Layer D:UDP */
+ [NPC_LT_LD_UDP] = {
+ /* SPORT: 2 bytes, KW3[15:0] */
+ KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18),
+ /* DPORT: 2 bytes, KW3[31:16] */
+ KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a),
+ },
+ /* Layer D:TCP */
+ [NPC_LT_LD_TCP] = {
+ /* SPORT: 2 bytes, KW3[15:0] */
+ KEX_LD_CFG(0x1, 0x0, 0x1, 0x0, 0x18),
+ /* DPORT: 2 bytes, KW3[31:16] */
+ KEX_LD_CFG(0x1, 0x2, 0x1, 0x0, 0x1a),
+ },
+ },
+ },
},
};
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8bac1dd3a1c2..8c11abdbd9d1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -57,6 +57,8 @@ enum nix_makr_fmt_indexes {
NIX_MARK_CFG_MAX,
};
+#define NIX_TX_PKIND 63ULL
+
/* For now considering MC resources needed for broadcast
* pkt replication only. i.e 256 HWVFs + 12 PFs.
*/
@@ -1182,6 +1184,10 @@ int rvu_mbox_handler_nix_lf_alloc(struct rvu *rvu,
/* Config Rx pkt length, csum checks and apad enable / disable */
rvu_write64(rvu, blkaddr, NIX_AF_LFX_RX_CFG(nixlf), req->rx_cfg);
+ /* Configure pkind for TX parse config, 63 from npc_profile */
+ cfg = NIX_TX_PKIND;
+ rvu_write64(rvu, blkaddr, NIX_AF_LFX_TX_PARSE_CFG(nixlf), cfg);
+
intf = is_afvf(pcifunc) ? NIX_INTF_TYPE_LBK : NIX_INTF_TYPE_CGX;
err = nix_interface_init(rvu, pcifunc, intf, nixlf);
if (err)
--
2.16.5
next prev parent reply other threads:[~2020-11-11 7:21 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 7:13 [PATCH v3 net-next 00/13] Add ethtool ntuple filters support Naveen Mamindlapalli
2020-11-11 7:13 ` Naveen Mamindlapalli [this message]
2020-11-12 19:57 ` [PATCH v3 net-next 01/13] octeontx2-af: Modify default KEX profile to extract TX packet fields Saeed Mahameed
2020-11-14 18:59 ` [EXT] " Naveen Mamindlapalli
2020-11-12 20:02 ` Alexander Duyck
2020-11-11 7:13 ` [PATCH v3 net-next 02/13] octeontx2-af: Verify MCAM entry channel and PF_FUNC Naveen Mamindlapalli
2020-11-12 20:03 ` Alexander Duyck
2020-11-11 7:13 ` [PATCH v3 net-next 03/13] octeontx2-af: Generate key field bit mask from KEX profile Naveen Mamindlapalli
2020-11-12 21:24 ` Alexander Duyck
2020-11-11 7:13 ` [PATCH v3 net-next 04/13] octeontx2-af: Add mbox messages to install and delete MCAM rules Naveen Mamindlapalli
2020-11-12 21:46 ` Alexander Duyck
2020-11-11 7:13 ` [PATCH v3 net-next 05/13] octeontx2-pf: Add support for ethtool ntuple filters Naveen Mamindlapalli
2020-11-11 7:13 ` [PATCH v3 net-next 06/13] octeontx2-pf: Add support for unicast MAC address filtering Naveen Mamindlapalli
2020-11-11 7:13 ` [PATCH v3 net-next 07/13] octeontx2-af: Add debugfs entry to dump the MCAM rules Naveen Mamindlapalli
2020-11-12 19:48 ` Saeed Mahameed
2020-11-11 7:13 ` [PATCH v3 net-next 08/13] octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries Naveen Mamindlapalli
2020-11-11 7:14 ` [PATCH v3 net-next 09/13] octeontx2-pf: Implement ingress/egress VLAN offload Naveen Mamindlapalli
2020-11-11 7:14 ` [PATCH v3 net-next 10/13] octeontx2-pf: Add support for SR-IOV management functions Naveen Mamindlapalli
2020-11-11 7:14 ` [PATCH v3 net-next 11/13] octeontx2-af: Handle PF-VF mac address changes Naveen Mamindlapalli
2020-11-11 7:14 ` [PATCH v3 net-next 12/13] octeontx2-af: Add new mbox messages to retrieve MCAM entries Naveen Mamindlapalli
2020-11-11 7:14 ` [PATCH v3 net-next 13/13] octeontx2-af: Delete NIX_RXVLAN_ALLOC mailbox message Naveen Mamindlapalli
2020-11-12 20:16 ` [PATCH v3 net-next 00/13] Add ethtool ntuple filters support Saeed Mahameed
2020-11-14 19:00 ` [EXT] " Naveen Mamindlapalli
2020-11-14 18:33 [PATCH v3 net-next 01/13] octeontx2-af: Modify default KEX profile to extract TX packet fields Naveen Mamindlapalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201111071404.29620-2-naveenm@marvell.com \
--to=naveenm@marvell.com \
--cc=davem@davemloft.net \
--cc=gakula@marvell.com \
--cc=hkelam@marvell.com \
--cc=jerinj@marvell.com \
--cc=kuba@kernel.org \
--cc=lcherian@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeed@kernel.org \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).