linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
	Artem Lapkin <art@khadas.com>
Subject: [PATCH] arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards
Date: Mon, 16 Nov 2020 06:41:47 +0000	[thread overview]
Message-ID: <20201116064147.12062-1-christianshewitt@gmail.com> (raw)

Enable the rtc node on VIM1/VIM2 boards so users can simply attach a power
cell and use the on-board RTC without modifying the device-tree.

Cold boot with no cell attached is gracefully handled:

VIM2:~ # dmesg | grep rtc
[    7.716150] rtc-hym8563 1-0051: no valid clock/calendar values available
[    7.716957] rtc-hym8563 1-0051: registered as rtc0
[    7.729850] rtc-hym8563 1-0051: no valid clock/calendar values available
[    7.729877] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[    8.126768] rtc-hym8563 1-0051: no valid clock/calendar values available

Warm boot (and any boot with cell attached) recalls stored values resulting
in consistently faster (re)boot times:

VIM2:~ # dmesg | grep rtc
[    7.441671] rtc-hym8563 1-0051: registered as rtc0
[    7.442663] rtc-hym8563 1-0051: setting system clock to 2020-11-16T05:49:59 UTC (1605505799)

Suggested-by: Artem Lapkin <art@khadas.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---

This supersedes other recent attempts by Art to make the same change [0]
and [1] which were rejected for lack of justification for the change and
leaving comments behind. I have been using the same changes in my own
tree for a while.

Christian

[0] https://patchwork.kernel.org/project/linux-amlogic/patch/20200925033017.1790973-8-art@khadas.com/
[1] https://patchwork.kernel.org/project/linux-amlogic/patch/20200925033017.1790973-9-art@khadas.com/

 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 3 +--
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts      | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 8bcdffdf55d0..638a5992d760 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -97,8 +97,7 @@
 	pinctrl-names = "default";
 
 	rtc: rtc@51 {
-		/* has to be enabled manually when a battery is connected: */
-		status = "disabled";
+		status = "okay";
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index bff8ec2c1c70..da000c10b945 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -228,8 +228,7 @@
 	pinctrl-names = "default";
 
 	rtc: rtc@51 {
-		/* has to be enabled manually when a battery is connected: */
-		status = "disabled";
+		status = "okay";
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-- 
2.17.1


             reply	other threads:[~2020-11-16  6:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-16  6:41 Christian Hewitt [this message]
2020-11-16  8:36 ` [PATCH] arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards Neil Armstrong
2020-11-20 19:12 ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201116064147.12062-1-christianshewitt@gmail.com \
    --to=christianshewitt@gmail.com \
    --cc=art@khadas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).