linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 05/11] iio: adc: at91_adc: rework trigger definition
Date: Tue, 17 Nov 2020 15:06:50 +0100	[thread overview]
Message-ID: <20201117140656.1235055-6-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20201117140656.1235055-1-alexandre.belloni@bootlin.com>

Move the available trigger definition back in the driver to stop cluttering
the device tree. There is no functional change except that it actually
fixes the available triggers for at91sam9rl as it inherited the list from
at91sam9260 but actually has the triggers from at91sam9x5.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
 drivers/iio/adc/at91_adc.c | 80 +++++++++++++++++---------------------
 1 file changed, 36 insertions(+), 44 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0d67c812ef3d..83539422b704 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -207,6 +207,8 @@ struct at91_adc_caps {
 
 	u8	low_res_bits;
 	u8	high_res_bits;
+	u32	trigger_number;
+	const struct at91_adc_trigger *triggers;
 	struct at91_adc_reg_desc registers;
 };
 
@@ -227,8 +229,6 @@ struct at91_adc_state {
 	u8			sample_hold_time;
 	bool			sleep_mode;
 	struct iio_trigger	**trig;
-	struct at91_adc_trigger	*trigger_list;
-	u32			trigger_number;
 	bool			use_external;
 	u32			vref_mv;
 	u32			res;		/* resolution used for convertions */
@@ -537,13 +537,13 @@ static int at91_adc_channel_init(struct iio_dev *idev)
 }
 
 static int at91_adc_get_trigger_value_by_name(struct iio_dev *idev,
-					     struct at91_adc_trigger *triggers,
+					     const struct at91_adc_trigger *triggers,
 					     const char *trigger_name)
 {
 	struct at91_adc_state *st = iio_priv(idev);
 	int i;
 
-	for (i = 0; i < st->trigger_number; i++) {
+	for (i = 0; i < st->caps->trigger_number; i++) {
 		char *name = kasprintf(GFP_KERNEL,
 				"%s-dev%d-%s",
 				idev->name,
@@ -575,7 +575,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 	u8 bit;
 
 	value = at91_adc_get_trigger_value_by_name(idev,
-						   st->trigger_list,
+						   st->caps->triggers,
 						   idev->trig->name);
 	if (value < 0)
 		return value;
@@ -620,7 +620,7 @@ static const struct iio_trigger_ops at91_adc_trigger_ops = {
 };
 
 static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev,
-						     struct at91_adc_trigger *trigger)
+						     const struct at91_adc_trigger *trigger)
 {
 	struct iio_trigger *trig;
 	int ret;
@@ -647,7 +647,7 @@ static int at91_adc_trigger_init(struct iio_dev *idev)
 	int i, ret;
 
 	st->trig = devm_kcalloc(&idev->dev,
-				st->trigger_number, sizeof(*st->trig),
+				st->caps->trigger_number, sizeof(*st->trig),
 				GFP_KERNEL);
 
 	if (st->trig == NULL) {
@@ -655,12 +655,12 @@ static int at91_adc_trigger_init(struct iio_dev *idev)
 		goto error_ret;
 	}
 
-	for (i = 0; i < st->trigger_number; i++) {
-		if (st->trigger_list[i].is_external && !(st->use_external))
+	for (i = 0; i < st->caps->trigger_number; i++) {
+		if (st->caps->triggers[i].is_external && !(st->use_external))
 			continue;
 
 		st->trig[i] = at91_adc_allocate_trigger(idev,
-							st->trigger_list + i);
+							st->caps->triggers + i);
 		if (st->trig[i] == NULL) {
 			dev_err(&idev->dev,
 				"Could not allocate trigger %d\n", i);
@@ -685,7 +685,7 @@ static void at91_adc_trigger_remove(struct iio_dev *idev)
 	struct at91_adc_state *st = iio_priv(idev);
 	int i;
 
-	for (i = 0; i < st->trigger_number; i++) {
+	for (i = 0; i < st->caps->trigger_number; i++) {
 		iio_trigger_unregister(st->trig[i]);
 		iio_trigger_free(st->trig[i]);
 	}
@@ -838,8 +838,7 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
 {
 	struct at91_adc_state *st = iio_priv(idev);
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *trig_node;
-	int i = 0, ret;
+	int ret;
 	u32 prop;
 	char *s;
 
@@ -885,37 +884,6 @@ static int at91_adc_probe_dt(struct iio_dev *idev,
 
 	st->registers = &st->caps->registers;
 	st->num_channels = st->caps->num_channels;
-	st->trigger_number = of_get_child_count(node);
-	st->trigger_list = devm_kcalloc(&idev->dev,
-					st->trigger_number,
-					sizeof(struct at91_adc_trigger),
-					GFP_KERNEL);
-	if (!st->trigger_list) {
-		dev_err(&idev->dev, "Could not allocate trigger list memory.\n");
-		ret = -ENOMEM;
-		goto error_ret;
-	}
-
-	for_each_child_of_node(node, trig_node) {
-		struct at91_adc_trigger *trig = st->trigger_list + i;
-		const char *name;
-
-		if (of_property_read_string(trig_node, "trigger-name", &name)) {
-			dev_err(&idev->dev, "Missing trigger-name property in the DT.\n");
-			ret = -EINVAL;
-			goto error_ret;
-		}
-		trig->name = name;
-
-		if (of_property_read_u32(trig_node, "trigger-value", &prop)) {
-			dev_err(&idev->dev, "Missing trigger-value property in the DT.\n");
-			ret = -EINVAL;
-			goto error_ret;
-		}
-		trig->value = prop;
-		trig->is_external = of_property_read_bool(trig_node, "trigger-external");
-		i++;
-	}
 
 	/* Check if touchscreen is supported. */
 	if (st->caps->has_ts)
@@ -1315,6 +1283,13 @@ static int at91_adc_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
 
+static const struct at91_adc_trigger at91sam9260_triggers[] = {
+	{ .name = "timer-counter-0", .value = 0x1 },
+	{ .name = "timer-counter-1", .value = 0x3 },
+	{ .name = "timer-counter-2", .value = 0x5 },
+	{ .name = "external", .value = 0xd, .is_external = true },
+};
+
 static struct at91_adc_caps at91sam9260_caps = {
 	.calc_startup_ticks = calc_startup_ticks_9260,
 	.num_channels = 4,
@@ -1328,6 +1303,15 @@ static struct at91_adc_caps at91sam9260_caps = {
 		.mr_prescal_mask = AT91_ADC_PRESCAL_9260,
 		.mr_startup_mask = AT91_ADC_STARTUP_9260,
 	},
+	.triggers = at91sam9260_triggers,
+	.trigger_number = ARRAY_SIZE(at91sam9260_triggers),
+};
+
+static const struct at91_adc_trigger at91sam9x5_triggers[] = {
+	{ .name = "external-rising", .value = 0x1, .is_external = true },
+	{ .name = "external-falling", .value = 0x2, .is_external = true },
+	{ .name = "external-any", .value = 0x3, .is_external = true },
+	{ .name = "continuous", .value = 0x6 },
 };
 
 static struct at91_adc_caps at91sam9rl_caps = {
@@ -1344,6 +1328,8 @@ static struct at91_adc_caps at91sam9rl_caps = {
 		.mr_prescal_mask = AT91_ADC_PRESCAL_9260,
 		.mr_startup_mask = AT91_ADC_STARTUP_9G45,
 	},
+	.triggers = at91sam9x5_triggers,
+	.trigger_number = ARRAY_SIZE(at91sam9x5_triggers),
 };
 
 static struct at91_adc_caps at91sam9g45_caps = {
@@ -1360,6 +1346,8 @@ static struct at91_adc_caps at91sam9g45_caps = {
 		.mr_prescal_mask = AT91_ADC_PRESCAL_9G45,
 		.mr_startup_mask = AT91_ADC_STARTUP_9G45,
 	},
+	.triggers = at91sam9x5_triggers,
+	.trigger_number = ARRAY_SIZE(at91sam9x5_triggers),
 };
 
 static struct at91_adc_caps at91sam9x5_caps = {
@@ -1380,6 +1368,8 @@ static struct at91_adc_caps at91sam9x5_caps = {
 		.mr_prescal_mask = AT91_ADC_PRESCAL_9G45,
 		.mr_startup_mask = AT91_ADC_STARTUP_9X5,
 	},
+	.triggers = at91sam9x5_triggers,
+	.trigger_number = ARRAY_SIZE(at91sam9x5_triggers),
 };
 
 static struct at91_adc_caps sama5d3_caps = {
@@ -1399,6 +1389,8 @@ static struct at91_adc_caps sama5d3_caps = {
 		.mr_prescal_mask = AT91_ADC_PRESCAL_9G45,
 		.mr_startup_mask = AT91_ADC_STARTUP_9X5,
 	},
+	.triggers = at91sam9x5_triggers,
+	.trigger_number = ARRAY_SIZE(at91sam9x5_triggers),
 };
 
 static const struct of_device_id at91_adc_dt_ids[] = {
-- 
2.28.0


  parent reply	other threads:[~2020-11-17 14:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17 14:06 [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 01/11] iio: adc: at91_adc: remove platform data Alexandre Belloni
2020-11-28 14:04   ` Jonathan Cameron
2020-11-28 14:23     ` Alexandre Belloni
2020-11-28 15:26       ` Jonathan Cameron
2020-11-28 22:28         ` Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 02/11] iio: adc: at91_adc: rework resolution selection Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 03/11] dt-bindings:iio:adc:remove atmel,adc-res and atmel,adc-res-names Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 04/11] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt Alexandre Belloni
2020-11-17 14:06 ` Alexandre Belloni [this message]
2020-11-17 14:06 ` [PATCH v2 06/11] dt-bindings:iio:adc:remove triggers Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 07/11] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe Alexandre Belloni
2020-11-28 15:21   ` Jonathan Cameron
2020-11-17 14:06 ` [PATCH v2 08/11] iio: adc: at91_adc: remove forward declaration Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 09/11] ARM: dts: at91: sama5d3: use proper ADC compatible Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 10/11] ARM: dts: at91: at91sam9rl: fix ADC triggers Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 11/11] ARM: dts: at91: remove deprecated ADC properties Alexandre Belloni
2020-11-21 15:56 ` [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201117140656.1235055-6-alexandre.belloni@bootlin.com \
    --to=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).