linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <davem@davemloft.net>, <andrew@lunn.ch>, <f.fainelli@gmail.com>,
	<hkallweit1@gmail.com>, <robh@kernel.org>,
	<ciorneiioana@gmail.com>
Cc: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next v4 1/4] ethtool: Add 10base-T1L link mode entries
Date: Tue, 17 Nov 2020 14:15:52 -0600	[thread overview]
Message-ID: <20201117201555.26723-2-dmurphy@ti.com> (raw)
In-Reply-To: <20201117201555.26723-1-dmurphy@ti.com>

Add entries for the 10base-T1L full and half duplex supported modes.

$ ethtool eth0
        Supported ports: [ TP ]
        Supported link modes:   10baseT1L/Half 10baseT1L/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT1L/Half 10baseT1L/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 10Mb/s
        Duplex: Full
        Auto-negotiation: on
        Port: MII
        PHYAD: 1
        Transceiver: external
        Supports Wake-on: gs
        Wake-on: d
        SecureOn password: 00:00:00:00:00:00
        Current message level: 0x00000000 (0)

        Link detected: yes

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/net/phy/phy-core.c   | 4 +++-
 include/uapi/linux/ethtool.h | 2 ++
 net/ethtool/common.c         | 2 ++
 net/ethtool/linkmodes.c      | 2 ++
 4 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 8d333d3084ed..616fae7f0c86 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -13,7 +13,7 @@
  */
 const char *phy_speed_to_str(int speed)
 {
-	BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92,
+	BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 94,
 		"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
 		"If a speed or mode has been added please update phy_speed_to_str "
 		"and the PHY settings array.\n");
@@ -175,6 +175,8 @@ static const struct phy_setting settings[] = {
 	/* 10M */
 	PHY_SETTING(     10, FULL,     10baseT_Full		),
 	PHY_SETTING(     10, HALF,     10baseT_Half		),
+	PHY_SETTING(     10, FULL,     10baseT1L_Full		),
+	PHY_SETTING(     10, HALF,     10baseT1L_Half		),
 };
 #undef PHY_SETTING
 
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 9ca87bc73c44..16b6ea7548d3 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1619,6 +1619,8 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT	 = 89,
 	ETHTOOL_LINK_MODE_100baseFX_Half_BIT		 = 90,
 	ETHTOOL_LINK_MODE_100baseFX_Full_BIT		 = 91,
+	ETHTOOL_LINK_MODE_10baseT1L_Half_BIT		 = 92,
+	ETHTOOL_LINK_MODE_10baseT1L_Full_BIT		 = 93,
 	/* must be last entry */
 	__ETHTOOL_LINK_MODE_MASK_NBITS
 };
diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index 24036e3055a1..95f87febc742 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -194,6 +194,8 @@ const char link_mode_names[][ETH_GSTRING_LEN] = {
 	__DEFINE_LINK_MODE_NAME(400000, CR4, Full),
 	__DEFINE_LINK_MODE_NAME(100, FX, Half),
 	__DEFINE_LINK_MODE_NAME(100, FX, Full),
+	__DEFINE_LINK_MODE_NAME(10, T1L, Half),
+	__DEFINE_LINK_MODE_NAME(10, T1L, Full),
 };
 static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
 
diff --git a/net/ethtool/linkmodes.c b/net/ethtool/linkmodes.c
index c5bcb9abc8b9..a8fab6fb1b30 100644
--- a/net/ethtool/linkmodes.c
+++ b/net/ethtool/linkmodes.c
@@ -264,6 +264,8 @@ static const struct link_mode_info link_mode_params[] = {
 	__DEFINE_LINK_MODE_PARAMS(400000, CR4, Full),
 	__DEFINE_LINK_MODE_PARAMS(100, FX, Half),
 	__DEFINE_LINK_MODE_PARAMS(100, FX, Full),
+	__DEFINE_LINK_MODE_PARAMS(10, T1L, Half),
+	__DEFINE_LINK_MODE_PARAMS(10, T1L, Full),
 };
 
 const struct nla_policy ethnl_linkmodes_set_policy[] = {
-- 
2.29.2


  reply	other threads:[~2020-11-17 20:16 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17 20:15 [PATCH net-next v4 0/4] DP83TD510 Single Pair 10Mbps Ethernet PHY Dan Murphy
2020-11-17 20:15 ` Dan Murphy [this message]
2020-11-17 20:15 ` [PATCH net-next v4 2/4] dt-bindings: net: Add Rx/Tx output configuration for 10base T1L Dan Murphy
2020-11-17 20:31   ` Andrew Lunn
2020-11-17 20:36     ` Dan Murphy
2020-12-01  0:02   ` Rob Herring
2020-11-17 20:15 ` [PATCH net-next v4 3/4] dt-bindings: dp83td510: Add binding for DP83TD510 Ethernet PHY Dan Murphy
2020-12-01  0:13   ` Rob Herring
2020-11-17 20:15 ` [PATCH net-next v4 4/4] net: phy: dp83td510: Add support for the " Dan Murphy
2020-11-17 20:57   ` Ioana Ciornei
2020-11-18  7:36   ` kernel test robot
2020-11-20  1:49   ` Andrew Lunn
2020-11-30 16:57     ` Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201117201555.26723-2-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=andrew@lunn.ch \
    --cc=ciorneiioana@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).