linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
	will@kernel.org, joro@8bytes.org, maz@kernel.org,
	robin.murphy@arm.com, alex.williamson@redhat.com
Cc: jean-philippe@linaro.org, zhangfei.gao@linaro.org,
	zhangfei.gao@gmail.com, vivek.gautam@arm.com,
	shameerali.kolothum.thodi@huawei.com,
	jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
	tn@semihalf.com, nicoleotsuka@gmail.com, yuzenghui@huawei.com
Subject: [PATCH v13 01/15] iommu: Introduce attach/detach_pasid_table API
Date: Wed, 18 Nov 2020 12:21:37 +0100	[thread overview]
Message-ID: <20201118112151.25412-2-eric.auger@redhat.com> (raw)
In-Reply-To: <20201118112151.25412-1-eric.auger@redhat.com>

In virtualization use case, when a guest is assigned
a PCI host device, protected by a virtual IOMMU on the guest,
the physical IOMMU must be programmed to be consistent with
the guest mappings. If the physical IOMMU supports two
translation stages it makes sense to program guest mappings
onto the first stage/level (ARM/Intel terminology) while the host
owns the stage/level 2.

In that case, it is mandated to trap on guest configuration
settings and pass those to the physical iommu driver.

This patch adds a new API to the iommu subsystem that allows
to set/unset the pasid table information.

A generic iommu_pasid_table_config struct is introduced in
a new iommu.h uapi header. This is going to be used by the VFIO
user API.

Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>

---

v12 -> v13:
- Fix config check

v11 -> v12:
- add argsz, name the union
---
 drivers/iommu/iommu.c      | 68 ++++++++++++++++++++++++++++++++++++++
 include/linux/iommu.h      | 21 ++++++++++++
 include/uapi/linux/iommu.h | 54 ++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index b53446bb8c6b..978fe34378fb 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -2171,6 +2171,74 @@ int iommu_uapi_sva_unbind_gpasid(struct iommu_domain *domain, struct device *dev
 }
 EXPORT_SYMBOL_GPL(iommu_uapi_sva_unbind_gpasid);
 
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	if (unlikely(!domain->ops->attach_pasid_table))
+		return -ENODEV;
+
+	return domain->ops->attach_pasid_table(domain, cfg);
+}
+
+int iommu_uapi_attach_pasid_table(struct iommu_domain *domain,
+				  void __user *uinfo)
+{
+	struct iommu_pasid_table_config pasid_table_data = { 0 };
+	u32 minsz;
+
+	if (unlikely(!domain->ops->attach_pasid_table))
+		return -ENODEV;
+
+	/*
+	 * No new spaces can be added before the variable sized union, the
+	 * minimum size is the offset to the union.
+	 */
+	minsz = offsetof(struct iommu_pasid_table_config, vendor_data);
+
+	/* Copy minsz from user to get flags and argsz */
+	if (copy_from_user(&pasid_table_data, uinfo, minsz))
+		return -EFAULT;
+
+	/* Fields before the variable size union are mandatory */
+	if (pasid_table_data.argsz < minsz)
+		return -EINVAL;
+
+	/* PASID and address granu require additional info beyond minsz */
+	if (pasid_table_data.version != PASID_TABLE_CFG_VERSION_1)
+		return -EINVAL;
+	if (pasid_table_data.format == IOMMU_PASID_FORMAT_SMMUV3 &&
+	    pasid_table_data.argsz <
+		offsetofend(struct iommu_pasid_table_config, vendor_data.smmuv3))
+		return -EINVAL;
+
+	/*
+	 * User might be using a newer UAPI header which has a larger data
+	 * size, we shall support the existing flags within the current
+	 * size. Copy the remaining user data _after_ minsz but not more
+	 * than the current kernel supported size.
+	 */
+	if (copy_from_user((void *)&pasid_table_data + minsz, uinfo + minsz,
+			   min_t(u32, pasid_table_data.argsz, sizeof(pasid_table_data)) - minsz))
+		return -EFAULT;
+
+	/* Now the argsz is validated, check the content */
+	if (pasid_table_data.config < IOMMU_PASID_CONFIG_TRANSLATE ||
+	    pasid_table_data.config > IOMMU_PASID_CONFIG_ABORT)
+		return -EINVAL;
+
+	return domain->ops->attach_pasid_table(domain, &pasid_table_data);
+}
+EXPORT_SYMBOL_GPL(iommu_uapi_attach_pasid_table);
+
+void iommu_detach_pasid_table(struct iommu_domain *domain)
+{
+	if (unlikely(!domain->ops->detach_pasid_table))
+		return;
+
+	domain->ops->detach_pasid_table(domain);
+}
+EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
+
 static void __iommu_detach_device(struct iommu_domain *domain,
 				  struct device *dev)
 {
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index b95a6f8db6ff..464fcbecf841 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -223,6 +223,8 @@ struct iommu_iotlb_gather {
  * @cache_invalidate: invalidate translation caches
  * @sva_bind_gpasid: bind guest pasid and mm
  * @sva_unbind_gpasid: unbind guest pasid and mm
+ * @attach_pasid_table: attach a pasid table
+ * @detach_pasid_table: detach the pasid table
  * @def_domain_type: device default domain type, return value:
  *		- IOMMU_DOMAIN_IDENTITY: must use an identity domain
  *		- IOMMU_DOMAIN_DMA: must use a dma domain
@@ -287,6 +289,9 @@ struct iommu_ops {
 				      void *drvdata);
 	void (*sva_unbind)(struct iommu_sva *handle);
 	u32 (*sva_get_pasid)(struct iommu_sva *handle);
+	int (*attach_pasid_table)(struct iommu_domain *domain,
+				  struct iommu_pasid_table_config *cfg);
+	void (*detach_pasid_table)(struct iommu_domain *domain);
 
 	int (*page_response)(struct device *dev,
 			     struct iommu_fault_event *evt,
@@ -434,6 +439,11 @@ extern int iommu_uapi_sva_unbind_gpasid(struct iommu_domain *domain,
 					struct device *dev, void __user *udata);
 extern int iommu_sva_unbind_gpasid(struct iommu_domain *domain,
 				   struct device *dev, ioasid_t pasid);
+extern int iommu_attach_pasid_table(struct iommu_domain *domain,
+				    struct iommu_pasid_table_config *cfg);
+extern int iommu_uapi_attach_pasid_table(struct iommu_domain *domain,
+					 void __user *udata);
+extern void iommu_detach_pasid_table(struct iommu_domain *domain);
 extern struct iommu_domain *iommu_get_domain_for_dev(struct device *dev);
 extern struct iommu_domain *iommu_get_dma_domain(struct device *dev);
 extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
@@ -639,6 +649,7 @@ struct iommu_sva *iommu_sva_bind_device(struct device *dev,
 void iommu_sva_unbind_device(struct iommu_sva *handle);
 u32 iommu_sva_get_pasid(struct iommu_sva *handle);
 
+
 #else /* CONFIG_IOMMU_API */
 
 struct iommu_ops {};
@@ -1020,6 +1031,16 @@ iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
 	return -ENODEV;
 }
 
+static inline
+int iommu_attach_pasid_table(struct iommu_domain *domain,
+			     struct iommu_pasid_table_config *cfg)
+{
+	return -ENODEV;
+}
+
+static inline
+void iommu_detach_pasid_table(struct iommu_domain *domain) {}
+
 static inline struct iommu_sva *
 iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void *drvdata)
 {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index e1d9e75f2c94..082d758dd016 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -338,4 +338,58 @@ struct iommu_gpasid_bind_data {
 	} vendor;
 };
 
+/**
+ * struct iommu_pasid_smmuv3 - ARM SMMUv3 Stream Table Entry stage 1 related
+ *     information
+ * @version: API version of this structure
+ * @s1fmt: STE s1fmt (format of the CD table: single CD, linear table
+ *         or 2-level table)
+ * @s1dss: STE s1dss (specifies the behavior when @pasid_bits != 0
+ *         and no PASID is passed along with the incoming transaction)
+ * @padding: reserved for future use (should be zero)
+ *
+ * The PASID table is referred to as the Context Descriptor (CD) table on ARM
+ * SMMUv3. Please refer to the ARM SMMU 3.x spec (ARM IHI 0070A) for full
+ * details.
+ */
+struct iommu_pasid_smmuv3 {
+#define PASID_TABLE_SMMUV3_CFG_VERSION_1 1
+	__u32	version;
+	__u8	s1fmt;
+	__u8	s1dss;
+	__u8	padding[2];
+};
+
+/**
+ * struct iommu_pasid_table_config - PASID table data used to bind guest PASID
+ *     table to the host IOMMU
+ * @argsz: User filled size of this data
+ * @version: API version to prepare for future extensions
+ * @format: format of the PASID table
+ * @base_ptr: guest physical address of the PASID table
+ * @pasid_bits: number of PASID bits used in the PASID table
+ * @config: indicates whether the guest translation stage must
+ *          be translated, bypassed or aborted.
+ * @padding: reserved for future use (should be zero)
+ * @vendor_data.smmuv3: table information when @format is
+ * %IOMMU_PASID_FORMAT_SMMUV3
+ */
+struct iommu_pasid_table_config {
+	__u32	argsz;
+#define PASID_TABLE_CFG_VERSION_1 1
+	__u32	version;
+#define IOMMU_PASID_FORMAT_SMMUV3	1
+	__u32	format;
+	__u64	base_ptr;
+	__u8	pasid_bits;
+#define IOMMU_PASID_CONFIG_TRANSLATE	1
+#define IOMMU_PASID_CONFIG_BYPASS	2
+#define IOMMU_PASID_CONFIG_ABORT	3
+	__u8	config;
+	__u8    padding[2];
+	union {
+		struct iommu_pasid_smmuv3 smmuv3;
+	} vendor_data;
+};
+
 #endif /* _UAPI_IOMMU_H */
-- 
2.21.3


  reply	other threads:[~2020-11-18 11:22 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-18 11:21 [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part) Eric Auger
2020-11-18 11:21 ` Eric Auger [this message]
2020-11-18 16:19   ` [PATCH v13 01/15] iommu: Introduce attach/detach_pasid_table API Jacob Pan
2020-11-19 17:02     ` Auger Eric
2021-02-01 11:27   ` Keqian Zhu
2021-02-01 17:18     ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 02/15] iommu: Introduce bind/unbind_guest_msi Eric Auger
2021-02-01 11:52   ` Keqian Zhu
2021-02-12  8:55     ` Auger Eric
2021-02-18  8:43       ` Keqian Zhu
2021-02-18 10:35         ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 03/15] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2021-02-01 12:26   ` Keqian Zhu
2021-02-01 15:15     ` Jean-Philippe Brucker
2021-02-02  6:39       ` Keqian Zhu
2021-02-01 17:19     ` Auger Eric
2021-02-02  7:20       ` Keqian Zhu
2020-11-18 11:21 ` [PATCH v13 04/15] iommu/smmuv3: Allow s1 and s2 configs to coexist Eric Auger
2021-02-01 12:35   ` Keqian Zhu
2020-11-18 11:21 ` [PATCH v13 05/15] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2020-11-19  3:59   ` kernel test robot
     [not found]   ` <a40b90bd-6756-c8cc-b455-c093d16d35f5@huawei.com>
2020-12-03 13:01     ` Auger Eric
2020-12-03 13:23       ` Kunkun Jiang
2020-12-09 14:26   ` Shameerali Kolothum Thodi
2021-02-02  7:14   ` Keqian Zhu
2021-02-11 17:36     ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 06/15] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2021-02-02  8:03   ` Keqian Zhu
2021-02-11 17:35     ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 07/15] iommu/smmuv3: Allow stage 1 invalidation with unmanaged ASIDs Eric Auger
2020-12-01 13:33   ` Xingang Wang
2020-12-01 13:58     ` Auger Eric
2020-12-02 12:59       ` Wang Xingang
2020-12-03 18:42       ` Shameerali Kolothum Thodi
2020-12-04  9:53         ` Jean-Philippe Brucker
2020-12-04 10:20           ` Shameerali Kolothum Thodi
2020-12-04 10:23             ` Auger Eric
2021-01-14 16:58               ` Auger Eric
2021-01-14 17:09                 ` Shameerali Kolothum Thodi
2021-01-14 17:33                 ` Jean-Philippe Brucker
2021-01-14 18:00                   ` Auger Eric
2021-02-15 13:17         ` Auger Eric
2020-11-18 11:21 ` [PATCH v13 08/15] iommu/smmuv3: Implement cache_invalidate Eric Auger
2020-11-18 11:21 ` [PATCH v13 09/15] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2020-11-18 11:21 ` [PATCH v13 10/15] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2020-11-18 11:21 ` [PATCH v13 11/15] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2020-11-18 11:21 ` [PATCH v13 12/15] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2020-11-18 11:21 ` [PATCH v13 13/15] iommu/smmuv3: Report non recoverable faults Eric Auger
2020-11-18 11:21 ` [PATCH v13 14/15] iommu/smmuv3: Accept configs with more than one context descriptor Eric Auger
2020-11-18 11:21 ` [PATCH v13 15/15] iommu/smmuv3: Add PASID cache invalidation per PASID Eric Auger
2021-01-08 17:05 ` [PATCH v13 00/15] SMMUv3 Nested Stage Setup (IOMMU part) Shameerali Kolothum Thodi
2021-01-13 15:37   ` Auger Eric
2021-02-21 18:21   ` Auger Eric
2021-02-22  8:56     ` Shameerali Kolothum Thodi
2021-03-15 18:04 ` Krishna Reddy
2021-03-16  8:22   ` Auger Eric
2021-03-16 18:10     ` Krishna Reddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201118112151.25412-2-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=alex.williamson@redhat.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe@linaro.org \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=robin.murphy@arm.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=tn@semihalf.com \
    --cc=vivek.gautam@arm.com \
    --cc=will@kernel.org \
    --cc=yi.l.liu@intel.com \
    --cc=yuzenghui@huawei.com \
    --cc=zhangfei.gao@gmail.com \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).