[PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Manivannan Sadhasivam]

Hello,

This series adds support for parsing the partitions defined in Shared
Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
Current parser only supports V3 and V4 of the partition tables.

This series has been tested on SDX55 MTP board which has an onboard NAND
device.

Thanks,
Mani

Changes in v3:

* Handled le32 parameters in parser, collected review from Linus W.

Changes in v2:

* Added additionalProperties: false and removed unit address in binding

Manivannan Sadhasivam (4):
  dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
  mtd: parsers: Add Qcom SMEM parser
  mtd: rawnand: qcom: Add support for Qcom SMEM parser
  mtd: parsers: afs: Fix freeing the part name memory in failure

 .../mtd/partitions/qcom,smem-part.yaml        |  33 ++++
 drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
 drivers/mtd/parsers/Kconfig                   |   8 +
 drivers/mtd/parsers/Makefile                  |   1 +
 drivers/mtd/parsers/afs.c                     |   4 +-
 drivers/mtd/parsers/qcomsmempart.c            | 170 ++++++++++++++++++
 6 files changed, 216 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
 create mode 100644 drivers/mtd/parsers/qcomsmempart.c

-- 
2.17.1

[PATCH v3 1/4] dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser

[Manivannan Sadhasivam]

Add YAML binding for Qualcomm Shared Memory (SMEM) Flash partition
parser.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../mtd/partitions/qcom,smem-part.yaml        | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml

diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
new file mode 100644
index 000000000000..cf3f8c1e035d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMEM NAND flash partition parser binding
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Qualcomm SoCs supporting the NAND controller interface features a Shared
+  Memory (SMEM) based partition table scheme. The maximum partitions supported
+  varies between partition table revisions. V3 supports maximum 16 partitions
+  and V4 supports 48 partitions.
+
+properties:
+  compatible:
+    const: qcom,smem-part
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+        partitions {
+            compatible = "qcom,smem-part";
+        };
+    };
-- 
2.17.1

[PATCH v3 2/4] mtd: parsers: Add Qcom SMEM parser

[Manivannan Sadhasivam]

NAND based Qualcomm platforms have the partition table populated in the
Shared Memory (SMEM). Hence, add a parser for parsing the partitions
from it.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/mtd/parsers/Kconfig        |   8 ++
 drivers/mtd/parsers/Makefile       |   1 +
 drivers/mtd/parsers/qcomsmempart.c | 170 +++++++++++++++++++++++++++++
 3 files changed, 179 insertions(+)
 create mode 100644 drivers/mtd/parsers/qcomsmempart.c

diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index e72354322f62..d90c30229052 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -160,3 +160,11 @@ config MTD_REDBOOT_PARTS_READONLY
 	  'FIS directory' images, enable this option.
 
 endif # MTD_REDBOOT_PARTS
+
+config MTD_QCOMSMEM_PARTS
+	tristate "Qualcomm SMEM NAND flash partition parser"
+	depends on MTD_NAND_QCOM || COMPILE_TEST
+	depends on QCOM_SMEM
+	help
+	  This provides support for parsing partitions from Shared Memory (SMEM)
+	  for NAND flash on Qualcomm platforms.
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index b0c5f62f9e85..50eb0b0a2210 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
 obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
 obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
+obj-$(CONFIG_MTD_QCOMSMEM_PARTS)	+= qcomsmempart.o
diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c
new file mode 100644
index 000000000000..808cb33d71f8
--- /dev/null
+++ b/drivers/mtd/parsers/qcomsmempart.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Qualcomm SMEM NAND flash partition parser
+ *
+ * Copyright (C) 2020, Linaro Ltd.
+ */
+
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+#include <linux/soc/qcom/smem.h>
+
+#define SMEM_AARM_PARTITION_TABLE	9
+#define SMEM_APPS			0
+
+#define SMEM_FLASH_PART_MAGIC1		0x55ee73aa
+#define SMEM_FLASH_PART_MAGIC2		0xe35ebddb
+#define SMEM_FLASH_PTABLE_V3		3
+#define SMEM_FLASH_PTABLE_V4		4
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V3	16
+#define SMEM_FLASH_PTABLE_MAX_PARTS_V4	48
+#define SMEM_FLASH_PTABLE_HDR_LEN	(4 * sizeof(u32))
+#define SMEM_FLASH_PTABLE_NAME_SIZE	16
+
+/**
+ * struct smem_flash_pentry - SMEM Flash partition entry
+ * @name: Name of the partition
+ * @offset: Offset in blocks
+ * @length: Length of the partition in blocks
+ * @attr: Flags for this partition
+ */
+struct smem_flash_pentry {
+	char name[SMEM_FLASH_PTABLE_NAME_SIZE];
+	__le32 offset;
+	__le32 length;
+	u8 attr;
+} __packed __aligned(4);
+
+/**
+ * struct smem_flash_ptable - SMEM Flash partition table
+ * @magic1: Partition table Magic 1
+ * @magic2: Partition table Magic 2
+ * @version: Partition table version
+ * @numparts: Number of partitions in this ptable
+ * @pentry: Flash partition entries belonging to this ptable
+ */
+struct smem_flash_ptable {
+	__le32 magic1;
+	__le32 magic2;
+	__le32 version;
+	__le32 numparts;
+	struct smem_flash_pentry pentry[SMEM_FLASH_PTABLE_MAX_PARTS_V4];
+} __packed __aligned(4);
+
+static int parse_qcomsmem_part(struct mtd_info *mtd,
+			       const struct mtd_partition **pparts,
+			       struct mtd_part_parser_data *data)
+{
+	struct smem_flash_pentry *pentry;
+	struct smem_flash_ptable *ptable;
+	size_t len = SMEM_FLASH_PTABLE_HDR_LEN;
+	struct mtd_partition *parts;
+	int ret, i, numparts;
+	char *name, *c;
+
+	pr_debug("Parsing partition table info from SMEM\n");
+	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
+	if (IS_ERR(ptable)) {
+		pr_err("Error reading partition table header\n");
+		return PTR_ERR(ptable);
+	}
+
+	/* Verify ptable magic */
+	if (le32_to_cpu(ptable->magic1) != SMEM_FLASH_PART_MAGIC1 ||
+	    le32_to_cpu(ptable->magic2) != SMEM_FLASH_PART_MAGIC2) {
+		pr_err("Partition table magic verification failed\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that # of partitions is less than the max we have allocated */
+	numparts = le32_to_cpu(ptable->numparts);
+	if (numparts > SMEM_FLASH_PTABLE_MAX_PARTS_V4) {
+		pr_err("Partition numbers exceed the max limit\n");
+		return -EINVAL;
+	}
+
+	/* Find out length of partition data based on table version */
+	if (le32_to_cpu(ptable->version) <= SMEM_FLASH_PTABLE_V3) {
+		len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V3 *
+			sizeof(struct smem_flash_pentry);
+	} else if (le32_to_cpu(ptable->version) == SMEM_FLASH_PTABLE_V4) {
+		len = SMEM_FLASH_PTABLE_HDR_LEN + SMEM_FLASH_PTABLE_MAX_PARTS_V4 *
+			sizeof(struct smem_flash_pentry);
+	} else {
+		pr_err("Unknown ptable version (%d)", le32_to_cpu(ptable->version));
+		return -EINVAL;
+	}
+
+	/*
+	 * Now that the partition table header has been parsed, verified
+	 * and the length of the partition table calculated, read the
+	 * complete partition table
+	 */
+	ptable = qcom_smem_get(SMEM_APPS, SMEM_AARM_PARTITION_TABLE, &len);
+	if (IS_ERR_OR_NULL(ptable)) {
+		pr_err("Error reading partition table\n");
+		return PTR_ERR(ptable);
+	}
+
+	parts = kcalloc(numparts, sizeof(*parts), GFP_KERNEL);
+	if (!parts)
+		return -ENOMEM;
+
+	for (i = 0; i < numparts; i++) {
+		pentry = &ptable->pentry[i];
+		if (pentry->name[0] == '\0')
+			continue;
+
+		name = kstrdup(pentry->name, GFP_KERNEL);
+		if (!name) {
+			ret = -ENOMEM;
+			goto out_free_parts;
+		}
+
+		/* Convert name to lower case */
+		for (c = name; *c != '\0'; c++)
+			*c = tolower(*c);
+
+		parts[i].name = name;
+		parts[i].offset = le32_to_cpu(pentry->offset) * mtd->erasesize;
+		parts[i].mask_flags = pentry->attr;
+		parts[i].size = le32_to_cpu(pentry->length) * mtd->erasesize;
+		pr_debug("%d: %s offs=0x%08x size=0x%08x attr:0x%08x\n",
+			 i, pentry->name, le32_to_cpu(pentry->offset),
+			 le32_to_cpu(pentry->length), pentry->attr);
+	}
+
+	pr_debug("SMEM partition table found: ver: %d len: %d\n",
+		 le32_to_cpu(ptable->version), numparts);
+	*pparts = parts;
+
+	return numparts;
+
+out_free_parts:
+	while (--i >= 0)
+		kfree(parts[i].name);
+	kfree(parts);
+	*pparts = NULL;
+
+	return ret;
+}
+
+static const struct of_device_id qcomsmem_of_match_table[] = {
+	{ .compatible = "qcom,smem-part" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, qcomsmem_of_match_table);
+
+static struct mtd_part_parser mtd_parser_qcomsmem = {
+	.parse_fn = parse_qcomsmem_part,
+	.name = "qcomsmem",
+	.of_match_table = qcomsmem_of_match_table,
+};
+module_mtd_part_parser(mtd_parser_qcomsmem);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMEM NAND flash partition parser");
-- 
2.17.1

[PATCH v3 3/4] mtd: rawnand: qcom: Add support for Qcom SMEM parser

[Manivannan Sadhasivam]

Add support for using Qualcomm SMEM based flash partition parser in
Qualcomm NAND controller.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 777fb0de0680..1b031aeac18b 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2797,6 +2797,8 @@ static int qcom_nandc_setup(struct qcom_nand_controller *nandc)
 	return 0;
 }
 
+static const char * const probes[] = { "qcomsmem", NULL };
+
 static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 					    struct qcom_nand_host *host,
 					    struct device_node *dn)
@@ -2860,7 +2862,7 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc,
 		}
 	}
 
-	ret = mtd_device_register(mtd, NULL, 0);
+	ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
 	if (ret)
 		nand_cleanup(chip);
 
-- 
2.17.1

[PATCH v3 4/4] mtd: parsers: afs: Fix freeing the part name memory in failure

[Manivannan Sadhasivam]

In the case of failure while parsing the partitions, the iterator should
be pre decremented by one before starting to free the memory allocated
by kstrdup(). Because in the failure case, kstrdup() will not succeed
and thus no memory will be allocated for the current iteration.

Cc: Linus Walleij <linus.walleij@linaro.org>
Fixes: 1fca1f6abb38 ("mtd: afs: simplify partition parsing")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/mtd/parsers/afs.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/mtd/parsers/afs.c b/drivers/mtd/parsers/afs.c
index 980e332bdac4..26116694c821 100644
--- a/drivers/mtd/parsers/afs.c
+++ b/drivers/mtd/parsers/afs.c
@@ -370,10 +370,8 @@ static int parse_afs_partitions(struct mtd_info *mtd,
 	return i;
 
 out_free_parts:
-	while (i >= 0) {
+	while (--i >= 0)
 		kfree(parts[i].name);
-		i--;
-	}
 	kfree(parts);
 	*pparts = NULL;
 	return ret;
-- 
2.17.1

Re: [PATCH v3 1/4] dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser

[Rob Herring]

On Thu, Nov 19, 2020 at 12:43:05PM +0530, Manivannan Sadhasivam wrote:
> Add YAML binding for Qualcomm Shared Memory (SMEM) Flash partition
> parser.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../mtd/partitions/qcom,smem-part.yaml        | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> new file mode 100644
> index 000000000000..cf3f8c1e035d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> @@ -0,0 +1,33 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SMEM NAND flash partition parser binding
> +
> +maintainers:
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +description: |
> +  The Qualcomm SoCs supporting the NAND controller interface features a Shared
> +  Memory (SMEM) based partition table scheme. The maximum partitions supported
> +  varies between partition table revisions. V3 supports maximum 16 partitions
> +  and V4 supports 48 partitions.

V3 vs. V4 (and any other version for that matter) is discoverable?

> +
> +properties:
> +  compatible:
> +    const: qcom,smem-part
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    flash {
> +        partitions {
> +            compatible = "qcom,smem-part";
> +        };
> +    };
> -- 
> 2.17.1
> 

Re: [PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Manivannan Sadhasivam]

Hi,

On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This series adds support for parsing the partitions defined in Shared
> Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
> Current parser only supports V3 and V4 of the partition tables.
> 
> This series has been tested on SDX55 MTP board which has an onboard NAND
> device.
> 

Any update on this series?

Thanks,
Mani

> Thanks,
> Mani
> 
> Changes in v3:
> 
> * Handled le32 parameters in parser, collected review from Linus W.
> 
> Changes in v2:
> 
> * Added additionalProperties: false and removed unit address in binding
> 
> Manivannan Sadhasivam (4):
>   dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
>   mtd: parsers: Add Qcom SMEM parser
>   mtd: rawnand: qcom: Add support for Qcom SMEM parser
>   mtd: parsers: afs: Fix freeing the part name memory in failure
> 
>  .../mtd/partitions/qcom,smem-part.yaml        |  33 ++++
>  drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
>  drivers/mtd/parsers/Kconfig                   |   8 +
>  drivers/mtd/parsers/Makefile                  |   1 +
>  drivers/mtd/parsers/afs.c                     |   4 +-
>  drivers/mtd/parsers/qcomsmempart.c            | 170 ++++++++++++++++++
>  6 files changed, 216 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
>  create mode 100644 drivers/mtd/parsers/qcomsmempart.c
> 
> -- 
> 2.17.1
> 

Re: [PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Miquel Raynal]

Hi Manivannan,

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Thu,
10 Dec 2020 09:39:42 +0530:

> Hi,
> 
> On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote:
> > Hello,
> > 
> > This series adds support for parsing the partitions defined in Shared
> > Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
> > Current parser only supports V3 and V4 of the partition tables.
> > 
> > This series has been tested on SDX55 MTP board which has an onboard NAND
> > device.
> >   
> 
> Any update on this series?

Patches lgtm, I think Rob's Ack is still missing, let's wait for his
review.


Thanks,
Miquèl

Re: [PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Rob Herring]

On Thu, Dec 10, 2020 at 10:24:47PM +0100, Miquel Raynal wrote:
> Hi Manivannan,
> 
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Thu,
> 10 Dec 2020 09:39:42 +0530:
> 
> > Hi,
> > 
> > On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote:
> > > Hello,
> > > 
> > > This series adds support for parsing the partitions defined in Shared
> > > Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
> > > Current parser only supports V3 and V4 of the partition tables.
> > > 
> > > This series has been tested on SDX55 MTP board which has an onboard NAND
> > > device.
> > >   
> > 
> > Any update on this series?
> 
> Patches lgtm, I think Rob's Ack is still missing, let's wait for his
> review.

Perhaps answer my reply on Dec 7.

Rob

Re: [PATCH v3 1/4] dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser

[Manivannan Sadhasivam]

On Mon, Dec 07, 2020 at 03:52:36PM -0600, Rob Herring wrote:
> On Thu, Nov 19, 2020 at 12:43:05PM +0530, Manivannan Sadhasivam wrote:
> > Add YAML binding for Qualcomm Shared Memory (SMEM) Flash partition
> > parser.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  .../mtd/partitions/qcom,smem-part.yaml        | 33 +++++++++++++++++++
> >  1 file changed, 33 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > new file mode 100644
> > index 000000000000..cf3f8c1e035d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > @@ -0,0 +1,33 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm SMEM NAND flash partition parser binding
> > +
> > +maintainers:
> > +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > +
> > +description: |
> > +  The Qualcomm SoCs supporting the NAND controller interface features a Shared
> > +  Memory (SMEM) based partition table scheme. The maximum partitions supported
> > +  varies between partition table revisions. V3 supports maximum 16 partitions
> > +  and V4 supports 48 partitions.
> 
> V3 vs. V4 (and any other version for that matter) is discoverable?
> 

Yes, it is discoverable based on the partition header and we do that in
the parser.

Thanks,
Mani

> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,smem-part
> > +
> > +required:
> > +  - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    flash {
> > +        partitions {
> > +            compatible = "qcom,smem-part";
> > +        };
> > +    };
> > -- 
> > 2.17.1
> > 

Re: [PATCH v3 0/4] Add support for Qcom SMEM based NAND parser

[Manivannan Sadhasivam]

On Thu, Dec 10, 2020 at 09:10:48PM -0600, Rob Herring wrote:
> On Thu, Dec 10, 2020 at 10:24:47PM +0100, Miquel Raynal wrote:
> > Hi Manivannan,
> > 
> > Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Thu,
> > 10 Dec 2020 09:39:42 +0530:
> > 
> > > Hi,
> > > 
> > > On Thu, Nov 19, 2020 at 12:43:04PM +0530, Manivannan Sadhasivam wrote:
> > > > Hello,
> > > > 
> > > > This series adds support for parsing the partitions defined in Shared
> > > > Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
> > > > Current parser only supports V3 and V4 of the partition tables.
> > > > 
> > > > This series has been tested on SDX55 MTP board which has an onboard NAND
> > > > device.
> > > >   
> > > 
> > > Any update on this series?
> > 
> > Patches lgtm, I think Rob's Ack is still missing, let's wait for his
> > review.
> 
> Perhaps answer my reply on Dec 7.
> 

Sorry missed that... Just replied.

Thanks,
Mani

> Rob

Re: [PATCH v3 1/4] dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser

[Rob Herring]

On Fri, Dec 11, 2020 at 09:01:40AM +0530, Manivannan Sadhasivam wrote:
> On Mon, Dec 07, 2020 at 03:52:36PM -0600, Rob Herring wrote:
> > On Thu, Nov 19, 2020 at 12:43:05PM +0530, Manivannan Sadhasivam wrote:
> > > Add YAML binding for Qualcomm Shared Memory (SMEM) Flash partition
> > > parser.
> > > 
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > ---
> > >  .../mtd/partitions/qcom,smem-part.yaml        | 33 +++++++++++++++++++
> > >  1 file changed, 33 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > > new file mode 100644
> > > index 000000000000..cf3f8c1e035d
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
> > > @@ -0,0 +1,33 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm SMEM NAND flash partition parser binding
> > > +
> > > +maintainers:
> > > +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > +
> > > +description: |
> > > +  The Qualcomm SoCs supporting the NAND controller interface features a Shared
> > > +  Memory (SMEM) based partition table scheme. The maximum partitions supported
> > > +  varies between partition table revisions. V3 supports maximum 16 partitions
> > > +  and V4 supports 48 partitions.
> > 
> > V3 vs. V4 (and any other version for that matter) is discoverable?
> > 
> 
> Yes, it is discoverable based on the partition header and we do that in
> the parser.

Okay,

Reviewed-by: Rob Herring <robh@kernel.org>

> 
> Thanks,
> Mani
> 
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: qcom,smem-part
> > > +
> > > +required:
> > > +  - compatible
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    flash {
> > > +        partitions {
> > > +            compatible = "qcom,smem-part";
> > > +        };
> > > +    };
> > > -- 
> > > 2.17.1
> > >