From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: SW_Drivers@habana.ai
Subject: [PATCH] habanalabs: update firmware files
Date: Fri, 20 Nov 2020 23:06:27 +0200 [thread overview]
Message-ID: <20201120210627.22487-1-ogabbay@kernel.org> (raw)
Update various firmware header files with new defines.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
.../misc/habanalabs/include/common/hl_boot_if.h | 17 +++++++++++++++++
.../misc/habanalabs/include/gaudi/gaudi_fw_if.h | 3 ++-
.../misc/habanalabs/include/goya/goya_fw_if.h | 3 ++-
3 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index 68ac15c53f37..e5801ecf0cb2 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -56,6 +56,20 @@
* CPU_BOOT_ERR0_EFUSE_FAIL Reading from eFuse failed.
* The PCI device ID might be wrong.
*
+ * CPU_BOOT_ERR0_PRI_IMG_VER_FAIL Verification of primary image failed.
+ * It mean that ppboot checksum
+ * verification for the preboot primary
+ * image has failed to match expected
+ * checksum. Trying to program image again
+ * might solve this.
+ *
+ * CPU_BOOT_ERR0_SEC_IMG_VER_FAIL Verification of secondary image failed.
+ * It mean that ppboot checksum
+ * verification for the preboot secondary
+ * image has failed to match expected
+ * checksum. Trying to program image again
+ * might solve this.
+ *
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@@ -72,6 +86,8 @@
#define CPU_BOOT_ERR0_SECURITY_NOT_RDY (1 << 7)
#define CPU_BOOT_ERR0_SECURITY_FAIL (1 << 8)
#define CPU_BOOT_ERR0_EFUSE_FAIL (1 << 9)
+#define CPU_BOOT_ERR0_PRI_IMG_VER_FAIL (1 << 10)
+#define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL (1 << 11)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)
/*
@@ -141,6 +157,7 @@
* bits are not garbage, but actual
* statuses.
* Initialized in: preboot
+ *
*/
#define CPU_BOOT_DEV_STS0_SECURITY_EN (1 << 0)
#define CPU_BOOT_DEV_STS0_DEBUG_EN (1 << 1)
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
index d61a4c87b765..25acd9e87e20 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_fw_if.h
@@ -30,7 +30,8 @@ enum gaudi_pll_index {
MESH_PLL,
MME_PLL,
TPC_PLL,
- IF_PLL
+ IF_PLL,
+ PLL_MAX
};
enum gaudi_nic_axi_error {
diff --git a/drivers/misc/habanalabs/include/goya/goya_fw_if.h b/drivers/misc/habanalabs/include/goya/goya_fw_if.h
index 0fa80fe9f6cc..daf8d8cd14be 100644
--- a/drivers/misc/habanalabs/include/goya/goya_fw_if.h
+++ b/drivers/misc/habanalabs/include/goya/goya_fw_if.h
@@ -22,7 +22,8 @@ enum goya_pll_index {
MME_PLL,
PCI_PLL,
EMMC_PLL,
- TPC_PLL
+ TPC_PLL,
+ PLL_MAX
};
#define GOYA_PLL_FREQ_LOW 50000000 /* 50 MHz */
--
2.17.1
reply other threads:[~2020-11-20 21:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201120210627.22487-1-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=SW_Drivers@habana.ai \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).