linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean V Kelley <sean.v.kelley@intel.com>
To: bhelgaas@google.com, Jonathan.Cameron@huawei.com,
	xerces.zhao@gmail.com, rafael.j.wysocki@intel.com,
	ashok.raj@intel.com, tony.luck@intel.com,
	sathyanarayanan.kuppuswamy@intel.com, qiuxu.zhuo@intel.com
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Sean V Kelley <sean.v.kelley@intel.com>
Subject: [PATCH v12 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
Date: Fri, 20 Nov 2020 16:10:33 -0800	[thread overview]
Message-ID: <20201121001036.8560-13-sean.v.kelley@intel.com> (raw)
In-Reply-To: <20201121001036.8560-1-sean.v.kelley@intel.com>

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

When attempting error recovery for an RCiEP associated with an RCEC device,
there needs to be a way to update the Root Error Status, the Uncorrectable
Error Status and the Uncorrectable Error Severity of the parent RCEC.  In
some non-native cases in which there is no OS-visible device associated
with the RCiEP, there is nothing to act upon as the firmware is acting
before the OS.

Add handling for the linked RCEC in AER/ERR while taking into account
non-native cases.

Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
Link: https://lore.kernel.org/r/20201002184735.1229220-12-seanvk.dev@oregontracks.org
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/pcie/aer.c | 46 +++++++++++++++++++++++++++++++-----------
 drivers/pci/pcie/err.c | 20 +++++++++---------
 2 files changed, 44 insertions(+), 22 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 0ba0b47ae751..51389a6ee4ca 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1358,29 +1358,51 @@ static int aer_probe(struct pcie_device *dev)
  */
 static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 {
-	int aer = dev->aer_cap;
+	int type = pci_pcie_type(dev);
+	struct pci_dev *root;
+	int aer = 0;
+	int rc = 0;
 	u32 reg32;
-	int rc;
 
-	if (pcie_aer_is_native(dev)) {
+	if (type == PCI_EXP_TYPE_RC_END)
+		/*
+		 * The reset should only clear the Root Error Status
+		 * of the RCEC. Only perform this for the
+		 * native case, i.e., an RCEC is present.
+		 */
+		root = dev->rcec;
+	else
+		root = dev;
+
+	if (root)
+		aer = dev->aer_cap;
+
+	if ((aer) && pcie_aer_is_native(dev)) {
 		/* Disable Root's interrupt in response to error messages */
-		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
 		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
-		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
 	}
 
-	rc = pci_bus_error_reset(dev);
-	pci_info(dev, "Root Port link has been reset (%d)\n", rc);
+	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
+		if (pcie_has_flr(dev)) {
+			rc = pcie_flr(dev);
+			pci_info(dev, "has been reset (%d)\n", rc);
+		}
+	} else {
+		rc = pci_bus_error_reset(dev);
+		pci_info(dev, "Root Port link has been reset (%d)\n", rc);
+	}
 
-	if (pcie_aer_is_native(dev)) {
+	if ((aer) && pcie_aer_is_native(dev)) {
 		/* Clear Root Error Status */
-		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
-		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
 
 		/* Enable Root Port's interrupt in response to error messages */
-		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
+		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
 		reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
-		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
 	}
 
 	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 7883c9791562..cbc5abfe767b 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -148,10 +148,10 @@ static int report_resume(struct pci_dev *dev, void *data)
 
 /**
  * pci_walk_bridge - walk bridges potentially AER affected
- * @bridge:	bridge which may be a Port, an RCEC with associated RCiEPs,
- *		or an RCiEP associated with an RCEC
- * @cb:		callback to be called for each device found
- * @userdata:	arbitrary pointer to be passed to callback
+ * @bridge   bridge which may be an RCEC with associated RCiEPs,
+ *           or a Port.
+ * @cb       callback to be called for each device found
+ * @userdata arbitrary pointer to be passed to callback.
  *
  * If the device provided is a bridge, walk the subordinate bus, including
  * any bridged devices on buses under this bus.  Call the provided callback
@@ -164,8 +164,14 @@ static void pci_walk_bridge(struct pci_dev *bridge,
 			    int (*cb)(struct pci_dev *, void *),
 			    void *userdata)
 {
+	/*
+	 * In a non-native case where there is no OS-visible reporting
+	 * device the bridge will be NULL, i.e., no RCEC, no Downstream Port.
+	 */
 	if (bridge->subordinate)
 		pci_walk_bus(bridge->subordinate, cb, userdata);
+	else if (bridge->rcec)
+		cb(bridge->rcec, userdata);
 	else
 		cb(bridge, userdata);
 }
@@ -194,12 +200,6 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
 	pci_dbg(bridge, "broadcast error_detected message\n");
 	if (state == pci_channel_io_frozen) {
 		pci_walk_bridge(bridge, report_frozen_detected, &status);
-		if (type == PCI_EXP_TYPE_RC_END) {
-			pci_warn(dev, "subordinate device reset not possible for RCiEP\n");
-			status = PCI_ERS_RESULT_NONE;
-			goto failed;
-		}
-
 		status = reset_subordinates(bridge);
 		if (status != PCI_ERS_RESULT_RECOVERED) {
 			pci_warn(bridge, "subordinate device reset failed\n");
-- 
2.29.2


  parent reply	other threads:[~2020-11-21  0:11 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-21  0:10 [PATCH v12 00/15] Add RCEC handling to PCI/AER Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 01/15] AER: aer_root_reset() non-native handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 02/15] PCI/RCEC: Bind RCEC devices to the Root Port driver Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 03/15] PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 04/15] PCI/ERR: Rename reset_link() to reset_subordinates() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 05/15] PCI/ERR: Simplify by using pci_upstream_bridge() Sean V Kelley
2020-12-03 18:45   ` Kelley, Sean V
2020-12-03 22:25     ` Bjorn Helgaas
2020-11-21  0:10 ` [PATCH v12 06/15] PCI/ERR: Simplify by computing pci_pcie_type() once Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 07/15] PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() Sean V Kelley
2020-12-02 23:18   ` Bjorn Helgaas
2020-11-21  0:10 ` [PATCH v12 08/15] PCI/ERR: Avoid negated conditional for clarity Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 09/15] PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 10/15] PCI/ERR: Limit AER resets in pcie_do_recovery() Sean V Kelley
2020-11-23 23:28   ` Bjorn Helgaas
2020-11-23 23:57     ` Kelley, Sean V
2020-11-24 17:17       ` Bjorn Helgaas
2020-11-30 19:54         ` Kelley, Sean V
2020-12-01  0:25           ` Bjorn Helgaas
2020-12-01  1:09             ` Kuppuswamy, Sathyanarayanan
2020-12-01  1:13             ` Kelley, Sean V
2020-12-02 20:53             ` Kelley, Sean V
2020-12-02 21:27               ` Bjorn Helgaas
2020-12-02 22:54                 ` Kelley, Sean V
2020-11-21  0:10 ` [PATCH v12 11/15] PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs Sean V Kelley
2020-11-21  0:10 ` Sean V Kelley [this message]
2020-12-02 23:44   ` [PATCH v12 12/15] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR Bjorn Helgaas
2020-12-03  0:51     ` Kelley, Sean V
2020-12-04  0:01       ` Bjorn Helgaas
2020-12-04 17:17         ` Kelley, Sean V
2020-12-04 17:24           ` Bjorn Helgaas
2020-12-05 21:30           ` Bjorn Helgaas
2020-12-07 17:23             ` Kelley, Sean V
2020-11-21  0:10 ` [PATCH v12 13/15] PCI/AER: Add pcie_walk_rcec() to RCEC AER handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 14/15] PCI/PME: Add pcie_walk_rcec() to RCEC PME handling Sean V Kelley
2020-11-21  0:10 ` [PATCH v12 15/15] PCI/AER: Add RCEC AER error injection support Sean V Kelley
2020-11-21  4:26 ` [PATCH v12 00/15] Add RCEC handling to PCI/AER Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201121001036.8560-13-sean.v.kelley@intel.com \
    --to=sean.v.kelley@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=ashok.raj@intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=qiuxu.zhuo@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sathyanarayanan.kuppuswamy@intel.com \
    --cc=tony.luck@intel.com \
    --cc=xerces.zhao@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).