* [PATCH 0/2] drm: panel: add support for the Khadas TS050 panel
@ 2020-11-23 14:33 Neil Armstrong
2020-11-23 14:33 ` [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings Neil Armstrong
2020-11-23 14:33 ` [PATCH 2/2] drm: panel: add Khadas TS050 panel driver Neil Armstrong
0 siblings, 2 replies; 6+ messages in thread
From: Neil Armstrong @ 2020-11-23 14:33 UTC (permalink / raw)
To: sam; +Cc: dri-devel, devicetree, linux-kernel, Neil Armstrong
This add support & bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed
to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
Neil Armstrong (2):
dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings
drm: panel: add Khadas TS050 panel driver
.../display/panel/panel-simple-dsi.yaml | 2 +
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-khadas-ts050.c | 876 ++++++++++++++++++
4 files changed, 890 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-khadas-ts050.c
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings
2020-11-23 14:33 [PATCH 0/2] drm: panel: add support for the Khadas TS050 panel Neil Armstrong
@ 2020-11-23 14:33 ` Neil Armstrong
2020-11-23 20:47 ` Sam Ravnborg
2020-11-23 14:33 ` [PATCH 2/2] drm: panel: add Khadas TS050 panel driver Neil Armstrong
1 sibling, 1 reply; 6+ messages in thread
From: Neil Armstrong @ 2020-11-23 14:33 UTC (permalink / raw)
To: sam; +Cc: dri-devel, devicetree, linux-kernel, Neil Armstrong
This add the bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
.../devicetree/bindings/display/panel/panel-simple-dsi.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
index 72e4b6d4d5e1..fbd71669248f 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -35,6 +35,8 @@ properties:
- boe,tv080wum-nl0
# Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
- innolux,p079zca
+ # Khadas TS050 5" 1080x1920 LCD panel
+ - khadas,ts050
# Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
- kingdisplay,kd097d04
# LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] drm: panel: add Khadas TS050 panel driver
2020-11-23 14:33 [PATCH 0/2] drm: panel: add support for the Khadas TS050 panel Neil Armstrong
2020-11-23 14:33 ` [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings Neil Armstrong
@ 2020-11-23 14:33 ` Neil Armstrong
2020-11-23 21:05 ` Sam Ravnborg
1 sibling, 1 reply; 6+ messages in thread
From: Neil Armstrong @ 2020-11-23 14:33 UTC (permalink / raw)
To: sam; +Cc: dri-devel, devicetree, linux-kernel, Neil Armstrong
This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.
The init values was taken from the vendor source tree, comments were added to the
know values but most of the init table is undocumented.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-khadas-ts050.c | 876 +++++++++++++++++++++
3 files changed, 888 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-khadas-ts050.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index b4e021ea30f9..8fec45b2ce02 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -145,6 +145,17 @@ config DRM_PANEL_JDI_LT070ME05000
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
+config DRM_PANEL_KHADAS_TS050
+ tristate "Khadas TS050 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Khadas TS050 TFT-LCD
+ panel module. The panel has a 1080x1920 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host, a built-in LED backlight and touch controller.
+
config DRM_PANEL_KINGDISPLAY_KD097D04
tristate "Kingdisplay kd097d04 panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index ebbf488c7eac..03496695e03f 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
diff --git a/drivers/gpu/drm/panel/panel-khadas-ts050.c b/drivers/gpu/drm/panel/panel-khadas-ts050.c
new file mode 100644
index 000000000000..856fcad69306
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-khadas-ts050.c
@@ -0,0 +1,876 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+struct khadas_ts050_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link;
+
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *enable_gpio;
+
+ bool prepared;
+ bool enabled;
+};
+
+struct khadas_ts050_panel_cmd {
+ u8 cmd;
+ u8 data;
+};
+
+/* Only the CMD1 User Command set is documented */
+static const struct khadas_ts050_panel_cmd init_code[] = {
+ /* Select Unknown CMD Page (Undocumented) */
+ {0xff, 0xee},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ {0x1f, 0x45},
+ {0x24, 0x4f},
+ {0x38, 0xc8},
+ {0x39, 0x27},
+ {0x1e, 0x77},
+ {0x1d, 0x0f},
+ {0x7e, 0x71},
+ {0x7c, 0x03},
+ {0xff, 0x00},
+ {0xfb, 0x01},
+ {0x35, 0x01},
+ /* Select CMD2 Page0 (Undocumented) */
+ {0xff, 0x01},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ {0x00, 0x01},
+ {0x01, 0x55},
+ {0x02, 0x40},
+ {0x05, 0x40},
+ {0x06, 0x4a},
+ {0x07, 0x24},
+ {0x08, 0x0c},
+ {0x0b, 0x7d},
+ {0x0c, 0x7d},
+ {0x0e, 0xb0},
+ {0x0f, 0xae},
+ {0x11, 0x10},
+ {0x12, 0x10},
+ {0x13, 0x03},
+ {0x14, 0x4a},
+ {0x15, 0x12},
+ {0x16, 0x12},
+ {0x18, 0x00},
+ {0x19, 0x77},
+ {0x1a, 0x55},
+ {0x1b, 0x13},
+ {0x1c, 0x00},
+ {0x1d, 0x00},
+ {0x1e, 0x13},
+ {0x1f, 0x00},
+ {0x23, 0x00},
+ {0x24, 0x00},
+ {0x25, 0x00},
+ {0x26, 0x00},
+ {0x27, 0x00},
+ {0x28, 0x00},
+ {0x35, 0x00},
+ {0x66, 0x00},
+ {0x58, 0x82},
+ {0x59, 0x02},
+ {0x5a, 0x02},
+ {0x5b, 0x02},
+ {0x5c, 0x82},
+ {0x5d, 0x82},
+ {0x5e, 0x02},
+ {0x5f, 0x02},
+ {0x72, 0x31},
+ /* Select CMD2 Page4 (Undocumented) */
+ {0xff, 0x05},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ {0x00, 0x01},
+ {0x01, 0x0b},
+ {0x02, 0x0c},
+ {0x03, 0x09},
+ {0x04, 0x0a},
+ {0x05, 0x00},
+ {0x06, 0x0f},
+ {0x07, 0x10},
+ {0x08, 0x00},
+ {0x09, 0x00},
+ {0x0a, 0x00},
+ {0x0b, 0x00},
+ {0x0c, 0x00},
+ {0x0d, 0x13},
+ {0x0e, 0x15},
+ {0x0f, 0x17},
+ {0x10, 0x01},
+ {0x11, 0x0b},
+ {0x12, 0x0c},
+ {0x13, 0x09},
+ {0x14, 0x0a},
+ {0x15, 0x00},
+ {0x16, 0x0f},
+ {0x17, 0x10},
+ {0x18, 0x00},
+ {0x19, 0x00},
+ {0x1a, 0x00},
+ {0x1b, 0x00},
+ {0x1c, 0x00},
+ {0x1d, 0x13},
+ {0x1e, 0x15},
+ {0x1f, 0x17},
+ {0x20, 0x00},
+ {0x21, 0x03},
+ {0x22, 0x01},
+ {0x23, 0x40},
+ {0x24, 0x40},
+ {0x25, 0xed},
+ {0x29, 0x58},
+ {0x2a, 0x12},
+ {0x2b, 0x01},
+ {0x4b, 0x06},
+ {0x4c, 0x11},
+ {0x4d, 0x20},
+ {0x4e, 0x02},
+ {0x4f, 0x02},
+ {0x50, 0x20},
+ {0x51, 0x61},
+ {0x52, 0x01},
+ {0x53, 0x63},
+ {0x54, 0x77},
+ {0x55, 0xed},
+ {0x5b, 0x00},
+ {0x5c, 0x00},
+ {0x5d, 0x00},
+ {0x5e, 0x00},
+ {0x5f, 0x15},
+ {0x60, 0x75},
+ {0x61, 0x00},
+ {0x62, 0x00},
+ {0x63, 0x00},
+ {0x64, 0x00},
+ {0x65, 0x00},
+ {0x66, 0x00},
+ {0x67, 0x00},
+ {0x68, 0x04},
+ {0x69, 0x00},
+ {0x6a, 0x00},
+ {0x6c, 0x40},
+ {0x75, 0x01},
+ {0x76, 0x01},
+ {0x7a, 0x80},
+ {0x7b, 0xa3},
+ {0x7c, 0xd8},
+ {0x7d, 0x60},
+ {0x7f, 0x15},
+ {0x80, 0x81},
+ {0x83, 0x05},
+ {0x93, 0x08},
+ {0x94, 0x10},
+ {0x8a, 0x00},
+ {0x9b, 0x0f},
+ {0xea, 0xff},
+ {0xec, 0x00},
+ /* Select CMD2 Page0 (Undocumented) */
+ {0xff, 0x01},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ {0x75, 0x00},
+ {0x76, 0xdf},
+ {0x77, 0x00},
+ {0x78, 0xe4},
+ {0x79, 0x00},
+ {0x7a, 0xed},
+ {0x7b, 0x00},
+ {0x7c, 0xf6},
+ {0x7d, 0x00},
+ {0x7e, 0xff},
+ {0x7f, 0x01},
+ {0x80, 0x07},
+ {0x81, 0x01},
+ {0x82, 0x10},
+ {0x83, 0x01},
+ {0x84, 0x18},
+ {0x85, 0x01},
+ {0x86, 0x20},
+ {0x87, 0x01},
+ {0x88, 0x3d},
+ {0x89, 0x01},
+ {0x8a, 0x56},
+ {0x8b, 0x01},
+ {0x8c, 0x84},
+ {0x8d, 0x01},
+ {0x8e, 0xab},
+ {0x8f, 0x01},
+ {0x90, 0xec},
+ {0x91, 0x02},
+ {0x92, 0x22},
+ {0x93, 0x02},
+ {0x94, 0x23},
+ {0x95, 0x02},
+ {0x96, 0x55},
+ {0x97, 0x02},
+ {0x98, 0x8b},
+ {0x99, 0x02},
+ {0x9a, 0xaf},
+ {0x9b, 0x02},
+ {0x9c, 0xdf},
+ {0x9d, 0x03},
+ {0x9e, 0x01},
+ {0x9f, 0x03},
+ {0xa0, 0x2c},
+ {0xa2, 0x03},
+ {0xa3, 0x39},
+ {0xa4, 0x03},
+ {0xa5, 0x47},
+ {0xa6, 0x03},
+ {0xa7, 0x56},
+ {0xa9, 0x03},
+ {0xaa, 0x66},
+ {0xab, 0x03},
+ {0xac, 0x76},
+ {0xad, 0x03},
+ {0xae, 0x85},
+ {0xaf, 0x03},
+ {0xb0, 0x90},
+ {0xb1, 0x03},
+ {0xb2, 0xcb},
+ {0xb3, 0x00},
+ {0xb4, 0xdf},
+ {0xb5, 0x00},
+ {0xb6, 0xe4},
+ {0xb7, 0x00},
+ {0xb8, 0xed},
+ {0xb9, 0x00},
+ {0xba, 0xf6},
+ {0xbb, 0x00},
+ {0xbc, 0xff},
+ {0xbd, 0x01},
+ {0xbe, 0x07},
+ {0xbf, 0x01},
+ {0xc0, 0x10},
+ {0xc1, 0x01},
+ {0xc2, 0x18},
+ {0xc3, 0x01},
+ {0xc4, 0x20},
+ {0xc5, 0x01},
+ {0xc6, 0x3d},
+ {0xc7, 0x01},
+ {0xc8, 0x56},
+ {0xc9, 0x01},
+ {0xca, 0x84},
+ {0xcb, 0x01},
+ {0xcc, 0xab},
+ {0xcd, 0x01},
+ {0xce, 0xec},
+ {0xcf, 0x02},
+ {0xd0, 0x22},
+ {0xd1, 0x02},
+ {0xd2, 0x23},
+ {0xd3, 0x02},
+ {0xd4, 0x55},
+ {0xd5, 0x02},
+ {0xd6, 0x8b},
+ {0xd7, 0x02},
+ {0xd8, 0xaf},
+ {0xd9, 0x02},
+ {0xda, 0xdf},
+ {0xdb, 0x03},
+ {0xdc, 0x01},
+ {0xdd, 0x03},
+ {0xde, 0x2c},
+ {0xdf, 0x03},
+ {0xe0, 0x39},
+ {0xe1, 0x03},
+ {0xe2, 0x47},
+ {0xe3, 0x03},
+ {0xe4, 0x56},
+ {0xe5, 0x03},
+ {0xe6, 0x66},
+ {0xe7, 0x03},
+ {0xe8, 0x76},
+ {0xe9, 0x03},
+ {0xea, 0x85},
+ {0xeb, 0x03},
+ {0xec, 0x90},
+ {0xed, 0x03},
+ {0xee, 0xcb},
+ {0xef, 0x00},
+ {0xf0, 0xbb},
+ {0xf1, 0x00},
+ {0xf2, 0xc0},
+ {0xf3, 0x00},
+ {0xf4, 0xcc},
+ {0xf5, 0x00},
+ {0xf6, 0xd6},
+ {0xf7, 0x00},
+ {0xf8, 0xe1},
+ {0xf9, 0x00},
+ {0xfa, 0xea},
+ /* Select CMD2 Page2 (Undocumented) */
+ {0xff, 0x02},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ {0x00, 0x00},
+ {0x01, 0xf4},
+ {0x02, 0x00},
+ {0x03, 0xef},
+ {0x04, 0x01},
+ {0x05, 0x07},
+ {0x06, 0x01},
+ {0x07, 0x28},
+ {0x08, 0x01},
+ {0x09, 0x44},
+ {0x0a, 0x01},
+ {0x0b, 0x76},
+ {0x0c, 0x01},
+ {0x0d, 0xa0},
+ {0x0e, 0x01},
+ {0x0f, 0xe7},
+ {0x10, 0x02},
+ {0x11, 0x1f},
+ {0x12, 0x02},
+ {0x13, 0x22},
+ {0x14, 0x02},
+ {0x15, 0x54},
+ {0x16, 0x02},
+ {0x17, 0x8b},
+ {0x18, 0x02},
+ {0x19, 0xaf},
+ {0x1a, 0x02},
+ {0x1b, 0xe0},
+ {0x1c, 0x03},
+ {0x1d, 0x01},
+ {0x1e, 0x03},
+ {0x1f, 0x2d},
+ {0x20, 0x03},
+ {0x21, 0x39},
+ {0x22, 0x03},
+ {0x23, 0x47},
+ {0x24, 0x03},
+ {0x25, 0x57},
+ {0x26, 0x03},
+ {0x27, 0x65},
+ {0x28, 0x03},
+ {0x29, 0x77},
+ {0x2a, 0x03},
+ {0x2b, 0x85},
+ {0x2d, 0x03},
+ {0x2f, 0x8f},
+ {0x30, 0x03},
+ {0x31, 0xcb},
+ {0x32, 0x00},
+ {0x33, 0xbb},
+ {0x34, 0x00},
+ {0x35, 0xc0},
+ {0x36, 0x00},
+ {0x37, 0xcc},
+ {0x38, 0x00},
+ {0x39, 0xd6},
+ {0x3a, 0x00},
+ {0x3b, 0xe1},
+ {0x3d, 0x00},
+ {0x3f, 0xea},
+ {0x40, 0x00},
+ {0x41, 0xf4},
+ {0x42, 0x00},
+ {0x43, 0xfe},
+ {0x44, 0x01},
+ {0x45, 0x07},
+ {0x46, 0x01},
+ {0x47, 0x28},
+ {0x48, 0x01},
+ {0x49, 0x44},
+ {0x4a, 0x01},
+ {0x4b, 0x76},
+ {0x4c, 0x01},
+ {0x4d, 0xa0},
+ {0x4e, 0x01},
+ {0x4f, 0xe7},
+ {0x50, 0x02},
+ {0x51, 0x1f},
+ {0x52, 0x02},
+ {0x53, 0x22},
+ {0x54, 0x02},
+ {0x55, 0x54},
+ {0x56, 0x02},
+ {0x58, 0x8b},
+ {0x59, 0x02},
+ {0x5a, 0xaf},
+ {0x5b, 0x02},
+ {0x5c, 0xe0},
+ {0x5d, 0x03},
+ {0x5e, 0x01},
+ {0x5f, 0x03},
+ {0x60, 0x2d},
+ {0x61, 0x03},
+ {0x62, 0x39},
+ {0x63, 0x03},
+ {0x64, 0x47},
+ {0x65, 0x03},
+ {0x66, 0x57},
+ {0x67, 0x03},
+ {0x68, 0x65},
+ {0x69, 0x03},
+ {0x6a, 0x77},
+ {0x6b, 0x03},
+ {0x6c, 0x85},
+ {0x6d, 0x03},
+ {0x6e, 0x8f},
+ {0x6f, 0x03},
+ {0x70, 0xcb},
+ {0x71, 0x00},
+ {0x72, 0x00},
+ {0x73, 0x00},
+ {0x74, 0x21},
+ {0x75, 0x00},
+ {0x76, 0x4c},
+ {0x77, 0x00},
+ {0x78, 0x6b},
+ {0x79, 0x00},
+ {0x7a, 0x85},
+ {0x7b, 0x00},
+ {0x7c, 0x9a},
+ {0x7d, 0x00},
+ {0x7e, 0xad},
+ {0x7f, 0x00},
+ {0x80, 0xbe},
+ {0x81, 0x00},
+ {0x82, 0xcd},
+ {0x83, 0x01},
+ {0x84, 0x01},
+ {0x85, 0x01},
+ {0x86, 0x29},
+ {0x87, 0x01},
+ {0x88, 0x68},
+ {0x89, 0x01},
+ {0x8a, 0x98},
+ {0x8b, 0x01},
+ {0x8c, 0xe5},
+ {0x8d, 0x02},
+ {0x8e, 0x1e},
+ {0x8f, 0x02},
+ {0x90, 0x30},
+ {0x91, 0x02},
+ {0x92, 0x52},
+ {0x93, 0x02},
+ {0x94, 0x88},
+ {0x95, 0x02},
+ {0x96, 0xaa},
+ {0x97, 0x02},
+ {0x98, 0xd7},
+ {0x99, 0x02},
+ {0x9a, 0xf7},
+ {0x9b, 0x03},
+ {0x9c, 0x21},
+ {0x9d, 0x03},
+ {0x9e, 0x2e},
+ {0x9f, 0x03},
+ {0xa0, 0x3d},
+ {0xa2, 0x03},
+ {0xa3, 0x4c},
+ {0xa4, 0x03},
+ {0xa5, 0x5e},
+ {0xa6, 0x03},
+ {0xa7, 0x71},
+ {0xa9, 0x03},
+ {0xaa, 0x86},
+ {0xab, 0x03},
+ {0xac, 0x94},
+ {0xad, 0x03},
+ {0xae, 0xfa},
+ {0xaf, 0x00},
+ {0xb0, 0x00},
+ {0xb1, 0x00},
+ {0xb2, 0x21},
+ {0xb3, 0x00},
+ {0xb4, 0x4c},
+ {0xb5, 0x00},
+ {0xb6, 0x6b},
+ {0xb7, 0x00},
+ {0xb8, 0x85},
+ {0xb9, 0x00},
+ {0xba, 0x9a},
+ {0xbb, 0x00},
+ {0xbc, 0xad},
+ {0xbd, 0x00},
+ {0xbe, 0xbe},
+ {0xbf, 0x00},
+ {0xc0, 0xcd},
+ {0xc1, 0x01},
+ {0xc2, 0x01},
+ {0xc3, 0x01},
+ {0xc4, 0x29},
+ {0xc5, 0x01},
+ {0xc6, 0x68},
+ {0xc7, 0x01},
+ {0xc8, 0x98},
+ {0xc9, 0x01},
+ {0xca, 0xe5},
+ {0xcb, 0x02},
+ {0xcc, 0x1e},
+ {0xcd, 0x02},
+ {0xce, 0x20},
+ {0xcf, 0x02},
+ {0xd0, 0x52},
+ {0xd1, 0x02},
+ {0xd2, 0x88},
+ {0xd3, 0x02},
+ {0xd4, 0xaa},
+ {0xd5, 0x02},
+ {0xd6, 0xd7},
+ {0xd7, 0x02},
+ {0xd8, 0xf7},
+ {0xd9, 0x03},
+ {0xda, 0x21},
+ {0xdb, 0x03},
+ {0xdc, 0x2e},
+ {0xdd, 0x03},
+ {0xde, 0x3d},
+ {0xdf, 0x03},
+ {0xe0, 0x4c},
+ {0xe1, 0x03},
+ {0xe2, 0x5e},
+ {0xe3, 0x03},
+ {0xe4, 0x71},
+ {0xe5, 0x03},
+ {0xe6, 0x86},
+ {0xe7, 0x03},
+ {0xe8, 0x94},
+ {0xe9, 0x03},
+ {0xea, 0xfa},
+ /* Select CMD2 Page0 (Undocumented) */
+ {0xff, 0x01},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ /* Select CMD2 Page1 (Undocumented) */
+ {0xff, 0x02},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ /* Select CMD2 Page3 (Undocumented) */
+ {0xff, 0x04},
+ /* Reload CMD1: Don't reload default value to register */
+ {0xfb, 0x01},
+ /* Select CMD1 */
+ {0xff, 0x00},
+ {0xd3, 0x05}, /* RGBMIPICTRL: VSYNC back porch = 5 */
+ {0xd4, 0x04}, /* RGBMIPICTRL: VSYNC front porch = 4 */
+};
+
+static inline
+struct khadas_ts050_panel *to_khadas_ts050_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct khadas_ts050_panel, base);
+}
+
+static int khadas_ts050_panel_prepare(struct drm_panel *panel)
+{
+ struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
+ int err, regulator_err;
+ unsigned int i;
+
+ if (khadas_ts050->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
+
+ err = regulator_enable(khadas_ts050->supply);
+ if (err < 0)
+ return err;
+
+ gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 1);
+
+ msleep(60);
+
+ gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 1);
+
+ usleep_range(10000, 11000);
+
+ gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 0);
+
+ /* Select CMD2 page 4 (Undocumented) */
+ mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x05 }, 1);
+
+ /* Reload CMD1: Don't reload default value to register */
+ mipi_dsi_dcs_write(khadas_ts050->link, 0xfb, (u8[]){ 0x01 }, 1);
+
+ mipi_dsi_dcs_write(khadas_ts050->link, 0xc5, (u8[]){ 0x01 }, 1);
+
+ msleep(100);
+
+ for (i = 0; i < ARRAY_SIZE(init_code); i++) {
+ err = mipi_dsi_dcs_write(khadas_ts050->link,
+ init_code[i].cmd,
+ &init_code[i].data, 1);
+ if (err < 0) {
+ dev_err(panel->dev, "failed write cmds: %d\n", err);
+ goto poweroff;
+ }
+ }
+
+ err = mipi_dsi_dcs_exit_sleep_mode(khadas_ts050->link);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+ goto poweroff;
+ }
+
+ msleep(120);
+
+ /* Select CMD1 */
+ mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x00 }, 1);
+
+ err = mipi_dsi_dcs_set_tear_on(khadas_ts050->link,
+ MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set tear on: %d\n", err);
+ goto poweroff;
+ }
+
+
+ err = mipi_dsi_dcs_set_display_on(khadas_ts050->link);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
+ goto poweroff;
+ }
+
+ usleep_range(10000, 11000);
+
+ khadas_ts050->prepared = true;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
+
+ regulator_err = regulator_disable(khadas_ts050->supply);
+ if (regulator_err)
+ dev_err(panel->dev, "failed to disable regulator: %d\n", regulator_err);
+
+ return err;
+}
+
+static int khadas_ts050_panel_unprepare(struct drm_panel *panel)
+{
+ struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
+ int err;
+
+ if (!khadas_ts050->prepared)
+ return 0;
+
+ err = mipi_dsi_dcs_enter_sleep_mode(khadas_ts050->link);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
+ return err;
+ }
+
+ msleep(150);
+
+ gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
+
+ err = regulator_disable(khadas_ts050->supply);
+ if (err < 0)
+ return err;
+
+ khadas_ts050->prepared = false;
+
+ return 0;
+}
+
+static int khadas_ts050_panel_enable(struct drm_panel *panel)
+{
+ struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
+
+ if (khadas_ts050->enabled)
+ return 0;
+
+ khadas_ts050->enabled = true;
+
+ return 0;
+}
+
+static int khadas_ts050_panel_disable(struct drm_panel *panel)
+{
+ struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
+ int err;
+
+ if (!khadas_ts050->enabled)
+ return 0;
+
+ err = mipi_dsi_dcs_set_display_off(khadas_ts050->link);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
+
+ usleep_range(10000, 11000);
+
+ khadas_ts050->enabled = false;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 120000,
+ .hdisplay = 1088,
+ .hsync_start = 1088 + 104,
+ .hsync_end = 1088 + 104 + 4,
+ .htotal = 1088 + 104 + 4 + 127,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 4,
+ .vsync_end = 1920 + 4 + 2,
+ .vtotal = 1920 + 4 + 2 + 3,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static int khadas_ts050_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ drm_mode_probed_add(connector, mode);
+
+ connector->display_info.width_mm = 64;
+ connector->display_info.height_mm = 118;
+ connector->display_info.bpc = 8;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs khadas_ts050_panel_funcs = {
+ .prepare = khadas_ts050_panel_prepare,
+ .unprepare = khadas_ts050_panel_unprepare,
+ .enable = khadas_ts050_panel_enable,
+ .disable = khadas_ts050_panel_disable,
+ .get_modes = khadas_ts050_panel_get_modes,
+};
+
+static const struct of_device_id khadas_ts050_of_match[] = {
+ { .compatible = "khadas,ts050", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, khadas_ts050_of_match);
+
+static int khadas_ts050_panel_add(struct khadas_ts050_panel *khadas_ts050)
+{
+ struct device *dev = &khadas_ts050->link->dev;
+ int err;
+
+ khadas_ts050->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(khadas_ts050->supply))
+ return PTR_ERR(khadas_ts050->supply);
+
+ khadas_ts050->reset_gpio = devm_gpiod_get(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(khadas_ts050->reset_gpio)) {
+ err = PTR_ERR(khadas_ts050->reset_gpio);
+ dev_dbg(dev, "failed to get reset gpio: %d\n", err);
+ return err;
+ }
+
+ khadas_ts050->enable_gpio = devm_gpiod_get(dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(khadas_ts050->enable_gpio)) {
+ err = PTR_ERR(khadas_ts050->enable_gpio);
+ dev_dbg(dev, "failed to get enable gpio: %d\n", err);
+ return err;
+ }
+
+ drm_panel_init(&khadas_ts050->base, &khadas_ts050->link->dev,
+ &khadas_ts050_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ err = drm_panel_of_backlight(&khadas_ts050->base);
+ if (err)
+ return err;
+
+ drm_panel_add(&khadas_ts050->base);
+
+ return 0;
+}
+
+static int khadas_ts050_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct khadas_ts050_panel *khadas_ts050;
+ int err;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
+
+ khadas_ts050 = devm_kzalloc(&dsi->dev, sizeof(*khadas_ts050),
+ GFP_KERNEL);
+ if (!khadas_ts050)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, khadas_ts050);
+ khadas_ts050->link = dsi;
+
+ err = khadas_ts050_panel_add(khadas_ts050);
+ if (err < 0)
+ return err;
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int khadas_ts050_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+ drm_panel_remove(&khadas_ts050->base);
+ drm_panel_disable(&khadas_ts050->base);
+ drm_panel_unprepare(&khadas_ts050->base);
+
+ return 0;
+}
+
+static void khadas_ts050_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
+
+ drm_panel_disable(&khadas_ts050->base);
+ drm_panel_unprepare(&khadas_ts050->base);
+}
+
+static struct mipi_dsi_driver khadas_ts050_panel_driver = {
+ .driver = {
+ .name = "panel-khadas-ts050",
+ .of_match_table = khadas_ts050_of_match,
+ },
+ .probe = khadas_ts050_panel_probe,
+ .remove = khadas_ts050_panel_remove,
+ .shutdown = khadas_ts050_panel_shutdown,
+};
+module_mipi_dsi_driver(khadas_ts050_panel_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Khadas TS050 panel driver");
+MODULE_LICENSE("GPL v2");
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings
2020-11-23 14:33 ` [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings Neil Armstrong
@ 2020-11-23 20:47 ` Sam Ravnborg
0 siblings, 0 replies; 6+ messages in thread
From: Sam Ravnborg @ 2020-11-23 20:47 UTC (permalink / raw)
To: Neil Armstrong; +Cc: devicetree, linux-kernel, dri-devel
On Mon, Nov 23, 2020 at 03:33:53PM +0100, Neil Armstrong wrote:
> This add the bindings for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
> with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] drm: panel: add Khadas TS050 panel driver
2020-11-23 14:33 ` [PATCH 2/2] drm: panel: add Khadas TS050 panel driver Neil Armstrong
@ 2020-11-23 21:05 ` Sam Ravnborg
2020-11-24 9:08 ` Neil Armstrong
0 siblings, 1 reply; 6+ messages in thread
From: Sam Ravnborg @ 2020-11-23 21:05 UTC (permalink / raw)
To: Neil Armstrong; +Cc: devicetree, linux-kernel, dri-devel
Hi Neil.
Looks good but a few comments in the following that needs some attention.
Sam
On Mon, Nov 23, 2020 at 03:33:54PM +0100, Neil Armstrong wrote:
> This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
> with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
> It provides a MIPI DSI interface to the host, a built-in LED backlight
> and touch controller.
>
> The init values was taken from the vendor source tree, comments were added to the
> know values but most of the init table is undocumented.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 11 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-khadas-ts050.c | 876 +++++++++++++++++++++
> 3 files changed, 888 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-khadas-ts050.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index b4e021ea30f9..8fec45b2ce02 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -145,6 +145,17 @@ config DRM_PANEL_JDI_LT070ME05000
> The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
> 24 bit per pixel.
>
> +config DRM_PANEL_KHADAS_TS050
> + tristate "Khadas TS050 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for Khadas TS050 TFT-LCD
> + panel module. The panel has a 1080x1920 resolution and uses
> + 24 bit RGB per pixel. It provides a MIPI DSI interface to
> + the host, a built-in LED backlight and touch controller.
> +
> config DRM_PANEL_KINGDISPLAY_KD097D04
> tristate "Kingdisplay kd097d04 panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index ebbf488c7eac..03496695e03f 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
> obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
> obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
> +obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> diff --git a/drivers/gpu/drm/panel/panel-khadas-ts050.c b/drivers/gpu/drm/panel/panel-khadas-ts050.c
> new file mode 100644
> index 000000000000..856fcad69306
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-khadas-ts050.c
> @@ -0,0 +1,876 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre, SAS
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
Panels do not use DRM_ or drm_ for logging, so this include is not
needed.
> +
> +struct khadas_ts050_panel {
> + struct drm_panel base;
> + struct mipi_dsi_device *link;
> +
> + struct regulator *supply;
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *enable_gpio;
> +
> + bool prepared;
> + bool enabled;
> +};
> +
> +struct khadas_ts050_panel_cmd {
> + u8 cmd;
> + u8 data;
> +};
> +
> +/* Only the CMD1 User Command set is documented */
> +static const struct khadas_ts050_panel_cmd init_code[] = {
> + /* Select Unknown CMD Page (Undocumented) */
> + {0xff, 0xee},
...
> + {0xd4, 0x04}, /* RGBMIPICTRL: VSYNC front porch = 4 */
> +};
> +
> +static inline
> +struct khadas_ts050_panel *to_khadas_ts050_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct khadas_ts050_panel, base);
> +}
> +
> +static int khadas_ts050_panel_prepare(struct drm_panel *panel)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
> + int err, regulator_err;
> + unsigned int i;
> +
> + if (khadas_ts050->prepared)
> + return 0;
> +
> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
> +
> + err = regulator_enable(khadas_ts050->supply);
> + if (err < 0)
> + return err;
> +
> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 1);
> +
> + msleep(60);
> +
> + gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 1);
> +
> + usleep_range(10000, 11000);
> +
> + gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 0);
> +
> + /* Select CMD2 page 4 (Undocumented) */
> + mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x05 }, 1);
> +
> + /* Reload CMD1: Don't reload default value to register */
> + mipi_dsi_dcs_write(khadas_ts050->link, 0xfb, (u8[]){ 0x01 }, 1);
> +
> + mipi_dsi_dcs_write(khadas_ts050->link, 0xc5, (u8[]){ 0x01 }, 1);
> +
> + msleep(100);
> +
> + for (i = 0; i < ARRAY_SIZE(init_code); i++) {
> + err = mipi_dsi_dcs_write(khadas_ts050->link,
> + init_code[i].cmd,
> + &init_code[i].data, 1);
> + if (err < 0) {
> + dev_err(panel->dev, "failed write cmds: %d\n", err);
> + goto poweroff;
> + }
> + }
> +
> + err = mipi_dsi_dcs_exit_sleep_mode(khadas_ts050->link);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
> + goto poweroff;
> + }
> +
> + msleep(120);
> +
> + /* Select CMD1 */
> + mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x00 }, 1);
> +
> + err = mipi_dsi_dcs_set_tear_on(khadas_ts050->link,
> + MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to set tear on: %d\n", err);
> + goto poweroff;
> + }
> +
> +
> + err = mipi_dsi_dcs_set_display_on(khadas_ts050->link);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to set display on: %d\n", err);
> + goto poweroff;
> + }
> +
> + usleep_range(10000, 11000);
> +
> + khadas_ts050->prepared = true;
> +
> + return 0;
> +
> +poweroff:
> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 1);
??
So panel is left in reset mode.
> +
> + regulator_err = regulator_disable(khadas_ts050->supply);
> + if (regulator_err)
> + dev_err(panel->dev, "failed to disable regulator: %d\n", regulator_err);
This check is not really of any value and can be dropped.
> +
> + return err;
> +}
> +
> +static int khadas_ts050_panel_unprepare(struct drm_panel *panel)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
> + int err;
> +
> + if (!khadas_ts050->prepared)
> + return 0;
> +
> + err = mipi_dsi_dcs_enter_sleep_mode(khadas_ts050->link);
> + if (err < 0) {
> + dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
> + return err;
Hmm, even if we fail here or below the panel is no longer prepared.
I think it would be better to set prepared to false unconditionally.
Many panel drivers get this wrong.
> + }
> +
> + msleep(150);
> +
> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
> +
> + err = regulator_disable(khadas_ts050->supply);
> + if (err < 0)
> + return err;
> +
> + khadas_ts050->prepared = false;
> +
> + return 0;
> +}
> +
> +static int khadas_ts050_panel_enable(struct drm_panel *panel)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
> +
> + if (khadas_ts050->enabled)
> + return 0;
No need for the check - just set it to true.
> +
> + khadas_ts050->enabled = true;
> +
> + return 0;
> +}
> +
> +static int khadas_ts050_panel_disable(struct drm_panel *panel)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
> + int err;
> +
> + if (!khadas_ts050->enabled)
> + return 0;
> +
> + err = mipi_dsi_dcs_set_display_off(khadas_ts050->link);
> + if (err < 0)
> + dev_err(panel->dev, "failed to set display off: %d\n", err);
> +
> + usleep_range(10000, 11000);
> +
> + khadas_ts050->enabled = false;
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 120000,
> + .hdisplay = 1088,
> + .hsync_start = 1088 + 104,
> + .hsync_end = 1088 + 104 + 4,
> + .htotal = 1088 + 104 + 4 + 127,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 4,
> + .vsync_end = 1920 + 4 + 2,
> + .vtotal = 1920 + 4 + 2 + 3,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static int khadas_ts050_panel_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &default_mode);
> + if (!mode) {
> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + drm_mode_vrefresh(&default_mode));
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + drm_mode_probed_add(connector, mode);
> +
> + connector->display_info.width_mm = 64;
> + connector->display_info.height_mm = 118;
> + connector->display_info.bpc = 8;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs khadas_ts050_panel_funcs = {
> + .prepare = khadas_ts050_panel_prepare,
> + .unprepare = khadas_ts050_panel_unprepare,
> + .enable = khadas_ts050_panel_enable,
> + .disable = khadas_ts050_panel_disable,
> + .get_modes = khadas_ts050_panel_get_modes,
> +};
> +
> +static const struct of_device_id khadas_ts050_of_match[] = {
> + { .compatible = "khadas,ts050", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, khadas_ts050_of_match);
> +
> +static int khadas_ts050_panel_add(struct khadas_ts050_panel *khadas_ts050)
> +{
> + struct device *dev = &khadas_ts050->link->dev;
> + int err;
> +
> + khadas_ts050->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(khadas_ts050->supply))
> + return PTR_ERR(khadas_ts050->supply);
Use return dev_err_probbe(dev, PTR_ERR(khadas_ts050->supply), "failed to get power supply");
> +
> + khadas_ts050->reset_gpio = devm_gpiod_get(dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(khadas_ts050->reset_gpio)) {
> + err = PTR_ERR(khadas_ts050->reset_gpio);
> + dev_dbg(dev, "failed to get reset gpio: %d\n", err);
> + return err;
Likewise - use return dev_err_probe(...);
> +
> + khadas_ts050->enable_gpio = devm_gpiod_get(dev, "enable",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(khadas_ts050->enable_gpio)) {
> + err = PTR_ERR(khadas_ts050->enable_gpio);
> + dev_dbg(dev, "failed to get enable gpio: %d\n", err);
> + return err;
> + }
dev_err_probe()
> +
> + drm_panel_init(&khadas_ts050->base, &khadas_ts050->link->dev,
> + &khadas_ts050_panel_funcs, DRM_MODE_CONNECTOR_DSI);
> +
> + err = drm_panel_of_backlight(&khadas_ts050->base);
> + if (err)
> + return err;
> +
> + drm_panel_add(&khadas_ts050->base);
> +
> + return 0;
> +}
> +
> +static int khadas_ts050_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct khadas_ts050_panel *khadas_ts050;
> + int err;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
> +
> + khadas_ts050 = devm_kzalloc(&dsi->dev, sizeof(*khadas_ts050),
> + GFP_KERNEL);
> + if (!khadas_ts050)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, khadas_ts050);
> + khadas_ts050->link = dsi;
> +
> + err = khadas_ts050_panel_add(khadas_ts050);
> + if (err < 0)
> + return err;
> +
> + return mipi_dsi_attach(dsi);
> +}
> +
> +static int khadas_ts050_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
> + int err;
> +
> + err = mipi_dsi_detach(dsi);
> + if (err < 0)
> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
> +
> + drm_panel_remove(&khadas_ts050->base);
> + drm_panel_disable(&khadas_ts050->base);
> + drm_panel_unprepare(&khadas_ts050->base);
> +
> + return 0;
> +}
> +
> +static void khadas_ts050_panel_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
> +
> + drm_panel_disable(&khadas_ts050->base);
> + drm_panel_unprepare(&khadas_ts050->base);
> +}
> +
> +static struct mipi_dsi_driver khadas_ts050_panel_driver = {
> + .driver = {
> + .name = "panel-khadas-ts050",
> + .of_match_table = khadas_ts050_of_match,
> + },
> + .probe = khadas_ts050_panel_probe,
> + .remove = khadas_ts050_panel_remove,
> + .shutdown = khadas_ts050_panel_shutdown,
> +};
> +module_mipi_dsi_driver(khadas_ts050_panel_driver);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
> +MODULE_DESCRIPTION("Khadas TS050 panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] drm: panel: add Khadas TS050 panel driver
2020-11-23 21:05 ` Sam Ravnborg
@ 2020-11-24 9:08 ` Neil Armstrong
0 siblings, 0 replies; 6+ messages in thread
From: Neil Armstrong @ 2020-11-24 9:08 UTC (permalink / raw)
To: Sam Ravnborg; +Cc: devicetree, linux-kernel, dri-devel
Hi Sam,
On 23/11/2020 22:05, Sam Ravnborg wrote:
> Hi Neil.
>
> Looks good but a few comments in the following that needs some attention.
>
> Sam
>
> On Mon, Nov 23, 2020 at 03:33:54PM +0100, Neil Armstrong wrote:
>> This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
>> with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
>> It provides a MIPI DSI interface to the host, a built-in LED backlight
>> and touch controller.
>>
>> The init values was taken from the vendor source tree, comments were added to the
>> know values but most of the init table is undocumented.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/panel/Kconfig | 11 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-khadas-ts050.c | 876 +++++++++++++++++++++
>> 3 files changed, 888 insertions(+)
>> create mode 100644 drivers/gpu/drm/panel/panel-khadas-ts050.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index b4e021ea30f9..8fec45b2ce02 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -145,6 +145,17 @@ config DRM_PANEL_JDI_LT070ME05000
>> The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
>> 24 bit per pixel.
>>
>> +config DRM_PANEL_KHADAS_TS050
>> + tristate "Khadas TS050 panel"
>> + depends on OF
>> + depends on DRM_MIPI_DSI
>> + depends on BACKLIGHT_CLASS_DEVICE
>> + help
>> + Say Y here if you want to enable support for Khadas TS050 TFT-LCD
>> + panel module. The panel has a 1080x1920 resolution and uses
>> + 24 bit RGB per pixel. It provides a MIPI DSI interface to
>> + the host, a built-in LED backlight and touch controller.
>> +
>> config DRM_PANEL_KINGDISPLAY_KD097D04
>> tristate "Kingdisplay kd097d04 panel"
>> depends on OF
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index ebbf488c7eac..03496695e03f 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
>> obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
>> obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
>> obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
>> +obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
>> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
>> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
>> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
>> diff --git a/drivers/gpu/drm/panel/panel-khadas-ts050.c b/drivers/gpu/drm/panel/panel-khadas-ts050.c
>> new file mode 100644
>> index 000000000000..856fcad69306
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-khadas-ts050.c
>> @@ -0,0 +1,876 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2020 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_device.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_print.h>
> Panels do not use DRM_ or drm_ for logging, so this include is not
> needed.
Ok forgot to remove this
>
>> +
>> +struct khadas_ts050_panel {
>> + struct drm_panel base;
>> + struct mipi_dsi_device *link;
>> +
>> + struct regulator *supply;
>> + struct gpio_desc *reset_gpio;
>> + struct gpio_desc *enable_gpio;
>> +
>> + bool prepared;
>> + bool enabled;
>> +};
>> +
>> +struct khadas_ts050_panel_cmd {
>> + u8 cmd;
>> + u8 data;
>> +};
>> +
>> +/* Only the CMD1 User Command set is documented */
>> +static const struct khadas_ts050_panel_cmd init_code[] = {
>> + /* Select Unknown CMD Page (Undocumented) */
>> + {0xff, 0xee},
> ...
>> + {0xd4, 0x04}, /* RGBMIPICTRL: VSYNC front porch = 4 */
>> +};
>> +
>> +static inline
>> +struct khadas_ts050_panel *to_khadas_ts050_panel(struct drm_panel *panel)
>> +{
>> + return container_of(panel, struct khadas_ts050_panel, base);
>> +}
>> +
>> +static int khadas_ts050_panel_prepare(struct drm_panel *panel)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
>> + int err, regulator_err;
>> + unsigned int i;
>> +
>> + if (khadas_ts050->prepared)
>> + return 0;
>> +
>> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
>> +
>> + err = regulator_enable(khadas_ts050->supply);
>> + if (err < 0)
>> + return err;
>> +
>> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 1);
>> +
>> + msleep(60);
>> +
>> + gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 1);
>> +
>> + usleep_range(10000, 11000);
>> +
>> + gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 0);
>> +
>> + /* Select CMD2 page 4 (Undocumented) */
>> + mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x05 }, 1);
>> +
>> + /* Reload CMD1: Don't reload default value to register */
>> + mipi_dsi_dcs_write(khadas_ts050->link, 0xfb, (u8[]){ 0x01 }, 1);
>> +
>> + mipi_dsi_dcs_write(khadas_ts050->link, 0xc5, (u8[]){ 0x01 }, 1);
>> +
>> + msleep(100);
>> +
>> + for (i = 0; i < ARRAY_SIZE(init_code); i++) {
>> + err = mipi_dsi_dcs_write(khadas_ts050->link,
>> + init_code[i].cmd,
>> + &init_code[i].data, 1);
>> + if (err < 0) {
>> + dev_err(panel->dev, "failed write cmds: %d\n", err);
>> + goto poweroff;
>> + }
>> + }
>> +
>> + err = mipi_dsi_dcs_exit_sleep_mode(khadas_ts050->link);
>> + if (err < 0) {
>> + dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
>> + goto poweroff;
>> + }
>> +
>> + msleep(120);
>> +
>> + /* Select CMD1 */
>> + mipi_dsi_dcs_write(khadas_ts050->link, 0xff, (u8[]){ 0x00 }, 1);
>> +
>> + err = mipi_dsi_dcs_set_tear_on(khadas_ts050->link,
>> + MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>> + if (err < 0) {
>> + dev_err(panel->dev, "failed to set tear on: %d\n", err);
>> + goto poweroff;
>> + }
>> +
>> +
>> + err = mipi_dsi_dcs_set_display_on(khadas_ts050->link);
>> + if (err < 0) {
>> + dev_err(panel->dev, "failed to set display on: %d\n", err);
>> + goto poweroff;
>> + }
>> +
>> + usleep_range(10000, 11000);
>> +
>> + khadas_ts050->prepared = true;
>> +
>> + return 0;
>> +
>> +poweroff:
>> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
>
> gpiod_set_value_cansleep(khadas_ts050->reset_gpio, 1);
> ??
> So panel is left in reset mode.
Indeed, forgot this one
>> +
>> + regulator_err = regulator_disable(khadas_ts050->supply);
>> + if (regulator_err)
>> + dev_err(panel->dev, "failed to disable regulator: %d\n", regulator_err);
> This check is not really of any value and can be dropped.
ok
>
>> +
>> + return err;
>> +}
>> +
>> +static int khadas_ts050_panel_unprepare(struct drm_panel *panel)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
>> + int err;
>> +
>> + if (!khadas_ts050->prepared)
>> + return 0;
>> +
>> + err = mipi_dsi_dcs_enter_sleep_mode(khadas_ts050->link);
>> + if (err < 0) {
>> + dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
>> + return err;
> Hmm, even if we fail here or below the panel is no longer prepared.
> I think it would be better to set prepared to false unconditionally.
>
> Many panel drivers get this wrong.
ok
>
>
>> + }
>> +
>> + msleep(150);
>> +
>> + gpiod_set_value_cansleep(khadas_ts050->enable_gpio, 0);
>> +
>> + err = regulator_disable(khadas_ts050->supply);
>> + if (err < 0)
>> + return err;
>> +
>> + khadas_ts050->prepared = false;
>> +
>> + return 0;
>> +}
>> +
>> +static int khadas_ts050_panel_enable(struct drm_panel *panel)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
>> +
>> + if (khadas_ts050->enabled)
>> + return 0;
> No need for the check - just set it to true.
ok
>> +
>> + khadas_ts050->enabled = true;
>> +
>> + return 0;
>> +}
>> +
>> +static int khadas_ts050_panel_disable(struct drm_panel *panel)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = to_khadas_ts050_panel(panel);
>> + int err;
>> +
>> + if (!khadas_ts050->enabled)
>> + return 0;
>> +
>> + err = mipi_dsi_dcs_set_display_off(khadas_ts050->link);
>> + if (err < 0)
>> + dev_err(panel->dev, "failed to set display off: %d\n", err);
>> +
>> + usleep_range(10000, 11000);
>> +
>> + khadas_ts050->enabled = false;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct drm_display_mode default_mode = {
>> + .clock = 120000,
>> + .hdisplay = 1088,
>> + .hsync_start = 1088 + 104,
>> + .hsync_end = 1088 + 104 + 4,
>> + .htotal = 1088 + 104 + 4 + 127,
>> + .vdisplay = 1920,
>> + .vsync_start = 1920 + 4,
>> + .vsync_end = 1920 + 4 + 2,
>> + .vtotal = 1920 + 4 + 2 + 3,
>> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>> +};
>> +
>> +static int khadas_ts050_panel_get_modes(struct drm_panel *panel,
>> + struct drm_connector *connector)
>> +{
>> + struct drm_display_mode *mode;
>> +
>> + mode = drm_mode_duplicate(connector->dev, &default_mode);
>> + if (!mode) {
>> + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
>> + default_mode.hdisplay, default_mode.vdisplay,
>> + drm_mode_vrefresh(&default_mode));
>> + return -ENOMEM;
>> + }
>> +
>> + drm_mode_set_name(mode);
>> +
>> + drm_mode_probed_add(connector, mode);
>> +
>> + connector->display_info.width_mm = 64;
>> + connector->display_info.height_mm = 118;
>> + connector->display_info.bpc = 8;
>> +
>> + return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs khadas_ts050_panel_funcs = {
>> + .prepare = khadas_ts050_panel_prepare,
>> + .unprepare = khadas_ts050_panel_unprepare,
>> + .enable = khadas_ts050_panel_enable,
>> + .disable = khadas_ts050_panel_disable,
>> + .get_modes = khadas_ts050_panel_get_modes,
>> +};
>> +
>> +static const struct of_device_id khadas_ts050_of_match[] = {
>> + { .compatible = "khadas,ts050", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, khadas_ts050_of_match);
>> +
>> +static int khadas_ts050_panel_add(struct khadas_ts050_panel *khadas_ts050)
>> +{
>> + struct device *dev = &khadas_ts050->link->dev;
>> + int err;
>> +
>> + khadas_ts050->supply = devm_regulator_get(dev, "power");
>> + if (IS_ERR(khadas_ts050->supply))
>> + return PTR_ERR(khadas_ts050->supply);
> Use return dev_err_probbe(dev, PTR_ERR(khadas_ts050->supply), "failed to get power supply");
ok
>
>
>> +
>> + khadas_ts050->reset_gpio = devm_gpiod_get(dev, "reset",
>> + GPIOD_OUT_LOW);
>> + if (IS_ERR(khadas_ts050->reset_gpio)) {
>> + err = PTR_ERR(khadas_ts050->reset_gpio);
>> + dev_dbg(dev, "failed to get reset gpio: %d\n", err);
>> + return err;
> Likewise - use return dev_err_probe(...);
>
>> +
>> + khadas_ts050->enable_gpio = devm_gpiod_get(dev, "enable",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(khadas_ts050->enable_gpio)) {
>> + err = PTR_ERR(khadas_ts050->enable_gpio);
>> + dev_dbg(dev, "failed to get enable gpio: %d\n", err);
>> + return err;
>> + }
> dev_err_probe()
>
>> +
>> + drm_panel_init(&khadas_ts050->base, &khadas_ts050->link->dev,
>> + &khadas_ts050_panel_funcs, DRM_MODE_CONNECTOR_DSI);
>> +
>> + err = drm_panel_of_backlight(&khadas_ts050->base);
>> + if (err)
>> + return err;
>> +
>> + drm_panel_add(&khadas_ts050->base);
>> +
>> + return 0;
>> +}
>> +
>> +static int khadas_ts050_panel_probe(struct mipi_dsi_device *dsi)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050;
>> + int err;
>> +
>> + dsi->lanes = 4;
>> + dsi->format = MIPI_DSI_FMT_RGB888;
>> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
>> +
>> + khadas_ts050 = devm_kzalloc(&dsi->dev, sizeof(*khadas_ts050),
>> + GFP_KERNEL);
>> + if (!khadas_ts050)
>> + return -ENOMEM;
>> +
>> + mipi_dsi_set_drvdata(dsi, khadas_ts050);
>> + khadas_ts050->link = dsi;
>> +
>> + err = khadas_ts050_panel_add(khadas_ts050);
>> + if (err < 0)
>> + return err;
>> +
>> + return mipi_dsi_attach(dsi);
>> +}
>> +
>> +static int khadas_ts050_panel_remove(struct mipi_dsi_device *dsi)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
>> + int err;
>> +
>> + err = mipi_dsi_detach(dsi);
>> + if (err < 0)
>> + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
>> +
>> + drm_panel_remove(&khadas_ts050->base);
>> + drm_panel_disable(&khadas_ts050->base);
>> + drm_panel_unprepare(&khadas_ts050->base);
>> +
>> + return 0;
>> +}
>> +
>> +static void khadas_ts050_panel_shutdown(struct mipi_dsi_device *dsi)
>> +{
>> + struct khadas_ts050_panel *khadas_ts050 = mipi_dsi_get_drvdata(dsi);
>> +
>> + drm_panel_disable(&khadas_ts050->base);
>> + drm_panel_unprepare(&khadas_ts050->base);
>> +}
>> +
>> +static struct mipi_dsi_driver khadas_ts050_panel_driver = {
>> + .driver = {
>> + .name = "panel-khadas-ts050",
>> + .of_match_table = khadas_ts050_of_match,
>> + },
>> + .probe = khadas_ts050_panel_probe,
>> + .remove = khadas_ts050_panel_remove,
>> + .shutdown = khadas_ts050_panel_shutdown,
>> +};
>> +module_mipi_dsi_driver(khadas_ts050_panel_driver);
>> +
>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
>> +MODULE_DESCRIPTION("Khadas TS050 panel driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.25.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Thanks for the review!
Neil
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-24 9:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-23 14:33 [PATCH 0/2] drm: panel: add support for the Khadas TS050 panel Neil Armstrong
2020-11-23 14:33 ` [PATCH 1/2] dt-bindings: panel-simple-dsi: add Khadas TS050 panel bindings Neil Armstrong
2020-11-23 20:47 ` Sam Ravnborg
2020-11-23 14:33 ` [PATCH 2/2] drm: panel: add Khadas TS050 panel driver Neil Armstrong
2020-11-23 21:05 ` Sam Ravnborg
2020-11-24 9:08 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).