[PATCH AUTOSEL 4.14 01/12] HID: cypress: Support Varmilo Keyboards' media hotkeys

[PATCH AUTOSEL 4.14 01/12] HID: cypress: Support Varmilo Keyboards' media hotkeys

[Sasha Levin]

From: Frank Yang <puilp0502@gmail.com>

[ Upstream commit 652f3d00de523a17b0cebe7b90debccf13aa8c31 ]

The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.

More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.

Some notes:

* There seem to be multiple variants of the VA104M keyboard. This
  patch specifically targets 04b4:07b1 variant.

* The device works out-of-the-box on Windows platform with the generic
  consumer control device driver (hidserv.inf). This suggests that
  Windows either ignores the Logical Minimum/Logical Maximum or
  interprets the Usage ID assignment differently from the linux
  implementation; Maybe there are other devices out there that only
  works on Windows due to this problem?

Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-cypress.c | 44 ++++++++++++++++++++++++++++++++++-----
 drivers/hid/hid-ids.h     |  2 ++
 2 files changed, 41 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c
index 1689568b597d4..12c5d7c96527a 100644
--- a/drivers/hid/hid-cypress.c
+++ b/drivers/hid/hid-cypress.c
@@ -26,19 +26,17 @@
 #define CP_2WHEEL_MOUSE_HACK		0x02
 #define CP_2WHEEL_MOUSE_HACK_ON		0x04
 
+#define VA_INVAL_LOGICAL_BOUNDARY	0x08
+
 /*
  * Some USB barcode readers from cypress have usage min and usage max in
  * the wrong order
  */
-static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+static __u8 *cp_rdesc_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
 	unsigned int i;
 
-	if (!(quirks & CP_RDESC_SWAPPED_MIN_MAX))
-		return rdesc;
-
 	if (*rsize < 4)
 		return rdesc;
 
@@ -51,6 +49,40 @@ static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	return rdesc;
 }
 
+static __u8 *va_logical_boundary_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	/*
+	 * Varmilo VA104M (with VID Cypress and device ID 07B1) incorrectly
+	 * reports Logical Minimum of its Consumer Control device as 572
+	 * (0x02 0x3c). Fix this by setting its Logical Minimum to zero.
+	 */
+	if (*rsize == 25 &&
+			rdesc[0] == 0x05 && rdesc[1] == 0x0c &&
+			rdesc[2] == 0x09 && rdesc[3] == 0x01 &&
+			rdesc[6] == 0x19 && rdesc[7] == 0x00 &&
+			rdesc[11] == 0x16 && rdesc[12] == 0x3c && rdesc[13] == 0x02) {
+		hid_info(hdev,
+			 "fixing up varmilo VA104M consumer control report descriptor\n");
+		rdesc[12] = 0x00;
+		rdesc[13] = 0x00;
+	}
+	return rdesc;
+}
+
+static __u8 *cp_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+
+	if (quirks & CP_RDESC_SWAPPED_MIN_MAX)
+		rdesc = cp_rdesc_fixup(hdev, rdesc, rsize);
+	if (quirks & VA_INVAL_LOGICAL_BOUNDARY)
+		rdesc = va_logical_boundary_fixup(hdev, rdesc, rsize);
+
+	return rdesc;
+}
+
 static int cp_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
@@ -131,6 +163,8 @@ static const struct hid_device_id cp_devices[] = {
 		.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE),
 		.driver_data = CP_2WHEEL_MOUSE_HACK },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1),
+		.driver_data = VA_INVAL_LOGICAL_BOUNDARY },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, cp_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index a1e5e0529545b..222204c2da22a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -322,6 +322,8 @@
 #define USB_DEVICE_ID_CYPRESS_BARCODE_4	0xed81
 #define USB_DEVICE_ID_CYPRESS_TRUETOUCH	0xc001
 
+#define USB_DEVICE_ID_CYPRESS_VARMILO_VA104M_07B1   0X07b1
+
 #define USB_VENDOR_ID_DATA_MODUL	0x7374
 #define USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH	0x1201
 
-- 
2.27.0

[PATCH AUTOSEL 4.14 02/12] Input: i8042 - allow insmod to succeed on devices without an i8042 controller

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 ]

The i8042 module exports several symbols which may be used by other
modules.

Before this commit it would refuse to load (when built as a module itself)
on systems without an i8042 controller.

This is a problem specifically for the asus-nb-wmi module. Many Asus
laptops support the Asus WMI interface. Some of them have an i8042
controller and need to use i8042_install_filter() to filter some kbd
events. Other models do not have an i8042 controller (e.g. they use an
USB attached kbd).

Before this commit the asus-nb-wmi driver could not be loaded on Asus
models without an i8042 controller, when the i8042 code was built as
a module (as Arch Linux does) because the module_init function of the
i8042 module would fail with -ENODEV and thus the i8042_install_filter
symbol could not be loaded.

This commit fixes this by exiting from module_init with a return code
of 0 if no controller is found.  It also adds a i8042_present bool to
make the module_exit function a no-op in this case and also adds a
check for i8042_present to the exported i8042_command function.

The latter i8042_present check should not really be necessary because
when builtin that function can already be used on systems without
an i8042 controller, but better safe then sorry.

Reported-and-tested-by: Marius Iacob <themariusus@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 824f4c1c1f310..0e9f248370a3f 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -125,6 +125,7 @@ module_param_named(unmask_kbd_data, i8042_unmask_kbd_data, bool, 0600);
 MODULE_PARM_DESC(unmask_kbd_data, "Unconditional enable (may reveal sensitive data) of normally sanitize-filtered kbd data traffic debug log [pre-condition: i8042.debug=1 enabled]");
 #endif
 
+static bool i8042_present;
 static bool i8042_bypass_aux_irq_test;
 static char i8042_kbd_firmware_id[128];
 static char i8042_aux_firmware_id[128];
@@ -345,6 +346,9 @@ int i8042_command(unsigned char *param, int command)
 	unsigned long flags;
 	int retval;
 
+	if (!i8042_present)
+		return -1;
+
 	spin_lock_irqsave(&i8042_lock, flags);
 	retval = __i8042_command(param, command);
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -1599,12 +1603,15 @@ static int __init i8042_init(void)
 
 	err = i8042_platform_init();
 	if (err)
-		return err;
+		return (err == -ENODEV) ? 0 : err;
 
 	err = i8042_controller_check();
 	if (err)
 		goto err_platform_exit;
 
+	/* Set this before creating the dev to allow i8042_command to work right away */
+	i8042_present = true;
+
 	pdev = platform_create_bundle(&i8042_driver, i8042_probe, NULL, 0, NULL, 0);
 	if (IS_ERR(pdev)) {
 		err = PTR_ERR(pdev);
@@ -1623,6 +1630,9 @@ static int __init i8042_init(void)
 
 static void __exit i8042_exit(void)
 {
+	if (!i8042_present)
+		return;
+
 	platform_device_unregister(i8042_platform_device);
 	platform_driver_unregister(&i8042_driver);
 	i8042_platform_exit();
-- 
2.27.0

[PATCH AUTOSEL 4.14 03/12] HID: hid-sensor-hub: Fix issue with devices with no report ID

[Sasha Levin]

From: Pablo Ceballos <pceballos@google.com>

[ Upstream commit 34a9fa2025d9d3177c99351c7aaf256c5f50691f ]

Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.

Signed-off-by: Pablo Ceballos <pceballos@google.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-sensor-hub.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index b5bd5cb7d5324..aa078c1dad14f 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -496,7 +496,8 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 		return 1;
 
 	ptr = raw_data;
-	ptr++; /* Skip report id */
+	if (report->id)
+		ptr++; /* Skip report id */
 
 	spin_lock_irqsave(&pdata->lock, flags);
 
-- 
2.27.0

[PATCH AUTOSEL 4.14 04/12] dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant

[Sasha Levin]

From: Marc Ferland <ferlandm@amotus.ca>

[ Upstream commit 0ba2df09f1500d3f27398a3382b86d39c3e6abe2 ]

The xilinx_dma_poll_timeout macro is sometimes called while holding a
spinlock (see xilinx_dma_issue_pending() for an example) this means we
shouldn't sleep when polling the dma channel registers. To address it
in xilinx poll timeout macro use readl_poll_timeout_atomic instead of
readl_poll_timeout variant.

Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 2db352308e5c0..314f175cf8d05 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -422,8 +422,8 @@ struct xilinx_dma_device {
 #define to_dma_tx_descriptor(tx) \
 	container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
 #define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
-	readl_poll_timeout(chan->xdev->regs + chan->ctrl_offset + reg, val, \
-			   cond, delay_us, timeout_us)
+	readl_poll_timeout_atomic(chan->xdev->regs + chan->ctrl_offset + reg, \
+				  val, cond, delay_us, timeout_us)
 
 /* IO accessors */
 static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
-- 
2.27.0

[PATCH AUTOSEL 4.14 05/12] x86/xen: don't unbind uninitialized lock_kicker_irq

[Sasha Levin]

From: Brian Masney <bmasney@redhat.com>

[ Upstream commit 65cae18882f943215d0505ddc7e70495877308e6 ]

When booting a hyperthreaded system with the kernel parameter
'mitigations=auto,nosmt', the following warning occurs:

    WARNING: CPU: 0 PID: 1 at drivers/xen/events/events_base.c:1112 unbind_from_irqhandler+0x4e/0x60
    ...
    Hardware name: Xen HVM domU, BIOS 4.2.amazon 08/24/2006
    ...
    Call Trace:
     xen_uninit_lock_cpu+0x28/0x62
     xen_hvm_cpu_die+0x21/0x30
     takedown_cpu+0x9c/0xe0
     ? trace_suspend_resume+0x60/0x60
     cpuhp_invoke_callback+0x9a/0x530
     _cpu_up+0x11a/0x130
     cpu_up+0x7e/0xc0
     bringup_nonboot_cpus+0x48/0x50
     smp_init+0x26/0x79
     kernel_init_freeable+0xea/0x229
     ? rest_init+0xaa/0xaa
     kernel_init+0xa/0x106
     ret_from_fork+0x35/0x40

The secondary CPUs are not activated with the nosmt mitigations and only
the primary thread on each CPU core is used. In this situation,
xen_hvm_smp_prepare_cpus(), and more importantly xen_init_lock_cpu(), is
not called, so the lock_kicker_irq is not initialized for the secondary
CPUs. Let's fix this by exiting early in xen_uninit_lock_cpu() if the
irq is not set to avoid the warning from above for each secondary CPU.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20201107011119.631442-1-bmasney@redhat.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/spinlock.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 2527540051ff0..e22ee24396158 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -99,10 +99,20 @@ void xen_init_lock_cpu(int cpu)
 
 void xen_uninit_lock_cpu(int cpu)
 {
+	int irq;
+
 	if (!xen_pvspin)
 		return;
 
-	unbind_from_irqhandler(per_cpu(lock_kicker_irq, cpu), NULL);
+	/*
+	 * When booting the kernel with 'mitigations=auto,nosmt', the secondary
+	 * CPUs are not activated, and lock_kicker_irq is not initialized.
+	 */
+	irq = per_cpu(lock_kicker_irq, cpu);
+	if (irq == -1)
+		return;
+
+	unbind_from_irqhandler(irq, NULL);
 	per_cpu(lock_kicker_irq, cpu) = -1;
 	kfree(per_cpu(irq_name, cpu));
 	per_cpu(irq_name, cpu) = NULL;
-- 
2.27.0

[PATCH AUTOSEL 4.14 06/12] HID: Add Logitech Dinovo Edge battery quirk

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 7940fb035abd88040d56be209962feffa33b03d0 ]

The battery status is also being reported by the logitech-hidpp driver,
so ignore the standard HID battery status to avoid reporting the same
info twice.

Note the logitech-hidpp battery driver provides more info, such as properly
differentiating between charging and discharging. Also the standard HID
battery info seems to be wrong, reporting a capacity of just 26% after
fully charging the device.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h   | 1 +
 drivers/hid/hid-input.c | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 222204c2da22a..be0707cfc0fd1 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -696,6 +696,7 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
 #define USB_DEVICE_ID_LOGITECH_T651	0xb00c
+#define USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD	0xb309
 #define USB_DEVICE_ID_LOGITECH_C007	0xc007
 #define USB_DEVICE_ID_LOGITECH_C077	0xc077
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 07a043ae69f12..0e63cedcc3b51 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -331,6 +331,9 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ASUSTEK,
 		USB_DEVICE_ID_ASUSTEK_T100CHI_KEYBOARD),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 
-- 
2.27.0

[PATCH AUTOSEL 4.14 07/12] proc: don't allow async path resolution of /proc/self components

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 8d4c3e76e3be11a64df95ddee52e99092d42fc19 ]

If this is attempted by a kthread, then return -EOPNOTSUPP as we don't
currently support that. Once we can get task_pid_ptr() doing the right
thing, then this can go away again.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/self.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/proc/self.c b/fs/proc/self.c
index 398cdf9a9f0c6..eba167e1700ef 100644
--- a/fs/proc/self.c
+++ b/fs/proc/self.c
@@ -15,6 +15,13 @@ static const char *proc_self_get_link(struct dentry *dentry,
 	pid_t tgid = task_tgid_nr_ns(current, ns);
 	char *name;
 
+	/*
+	 * Not currently supported. Once we can inherit all of struct pid,
+	 * we can allow this.
+	 */
+	if (current->flags & PF_KTHREAD)
+		return ERR_PTR(-EOPNOTSUPP);
+
 	if (!tgid)
 		return ERR_PTR(-ENOENT);
 	/* 11 for max length of signed int in decimal + NULL term */
-- 
2.27.0

[PATCH AUTOSEL 4.14 08/12] nvme: free sq/cq dbbuf pointers when dbbuf set fails

[Sasha Levin]

From: Minwoo Im <minwoo.im.dev@gmail.com>

[ Upstream commit 0f0d2c876c96d4908a9ef40959a44bec21bdd6cf ]

If Doorbell Buffer Config command fails even 'dev->dbbuf_dbs != NULL'
which means OACS indicates that NVME_CTRL_OACS_DBBUF_SUPP is set,
nvme_dbbuf_update_and_check_event() will check event even it's not been
successfully set.

This patch fixes mismatch among dbbuf for sq/cqs in case that dbbuf
command fails.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 3788c053a0b19..540fab9f850dd 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -266,9 +266,21 @@ static void nvme_dbbuf_init(struct nvme_dev *dev,
 	nvmeq->dbbuf_cq_ei = &dev->dbbuf_eis[cq_idx(qid, dev->db_stride)];
 }
 
+static void nvme_dbbuf_free(struct nvme_queue *nvmeq)
+{
+	if (!nvmeq->qid)
+		return;
+
+	nvmeq->dbbuf_sq_db = NULL;
+	nvmeq->dbbuf_cq_db = NULL;
+	nvmeq->dbbuf_sq_ei = NULL;
+	nvmeq->dbbuf_cq_ei = NULL;
+}
+
 static void nvme_dbbuf_set(struct nvme_dev *dev)
 {
 	struct nvme_command c;
+	unsigned int i;
 
 	if (!dev->dbbuf_dbs)
 		return;
@@ -282,6 +294,9 @@ static void nvme_dbbuf_set(struct nvme_dev *dev)
 		dev_warn(dev->ctrl.device, "unable to set dbbuf\n");
 		/* Free memory and continue on */
 		nvme_dbbuf_dma_free(dev);
+
+		for (i = 1; i <= dev->online_queues; i++)
+			nvme_dbbuf_free(&dev->queues[i]);
 	}
 }
 
-- 
2.27.0

[PATCH AUTOSEL 4.14 09/12] dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size

[Sasha Levin]

From: Sugar Zhang <sugar.zhang@rock-chips.com>

[ Upstream commit e773ca7da8beeca7f17fe4c9d1284a2b66839cc1 ]

Actually, burst size is equal to '1 << desc->rqcfg.brst_size'.
we should use burst size, not desc->rqcfg.brst_size.

dma memcpy performance on Rockchip RV1126
@ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA:

dmatest:

/# echo dma0chan0 > /sys/module/dmatest/parameters/channel
/# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size
/# echo 8 > /sys/module/dmatest/parameters/iterations
/# echo y > /sys/module/dmatest/parameters/norandom
/# echo y > /sys/module/dmatest/parameters/verbose
/# echo 1 > /sys/module/dmatest/parameters/run

dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000
dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000

Before:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0)

After this patch:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0)

After this patch and increase dma clk to 400MHz:

  dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0)

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pl330.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index ff8b7042d28f4..c034f506e015a 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2666,7 +2666,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	 * If burst size is smaller than bus width then make sure we only
 	 * transfer one at a time to avoid a burst stradling an MFIFO entry.
 	 */
-	if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
+	if (burst * 8 < pl330->pcfg.data_bus_width)
 		desc->rqcfg.brst_len = 1;
 
 	desc->bytes_requested = len;
-- 
2.27.0

[PATCH AUTOSEL 4.14 10/12] scsi: libiscsi: Fix NOP race condition

[Sasha Levin]

From: Lee Duncan <lduncan@suse.com>

[ Upstream commit fe0a8a95e7134d0b44cd407bc0085b9ba8d8fe31 ]

iSCSI NOPs are sometimes "lost", mistakenly sent to the user-land iscsid
daemon instead of handled in the kernel, as they should be, resulting in a
message from the daemon like:

  iscsid: Got nop in, but kernel supports nop handling.

This can occur because of the new forward- and back-locks, and the fact
that an iSCSI NOP response can occur before processing of the NOP send is
complete. This can result in "conn->ping_task" being NULL in
iscsi_nop_out_rsp(), when the pointer is actually in the process of being
set.

To work around this, we add a new state to the "ping_task" pointer. In
addition to NULL (not assigned) and a pointer (assigned), we add the state
"being set", which is signaled with an INVALID pointer (using "-1").

Link: https://lore.kernel.org/r/20201106193317.16993-1-leeman.duncan@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 23 +++++++++++++++--------
 include/scsi/libiscsi.h |  3 +++
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 662df16b07a40..f7e1af90849b3 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -571,8 +571,8 @@ static void iscsi_complete_task(struct iscsi_task *task, int state)
 	if (conn->task == task)
 		conn->task = NULL;
 
-	if (conn->ping_task == task)
-		conn->ping_task = NULL;
+	if (READ_ONCE(conn->ping_task) == task)
+		WRITE_ONCE(conn->ping_task, NULL);
 
 	/* release get from queueing */
 	__iscsi_put_task(task);
@@ -781,6 +781,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 						   task->conn->session->age);
 	}
 
+	if (unlikely(READ_ONCE(conn->ping_task) == INVALID_SCSI_TASK))
+		WRITE_ONCE(conn->ping_task, task);
+
 	if (!ihost->workq) {
 		if (iscsi_prep_mgmt_task(conn, task))
 			goto free_task;
@@ -988,8 +991,11 @@ static int iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
         struct iscsi_nopout hdr;
 	struct iscsi_task *task;
 
-	if (!rhdr && conn->ping_task)
-		return -EINVAL;
+	if (!rhdr) {
+		if (READ_ONCE(conn->ping_task))
+			return -EINVAL;
+		WRITE_ONCE(conn->ping_task, INVALID_SCSI_TASK);
+	}
 
 	memset(&hdr, 0, sizeof(struct iscsi_nopout));
 	hdr.opcode = ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE;
@@ -1004,11 +1010,12 @@ static int iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
 
 	task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
 	if (!task) {
+		if (!rhdr)
+			WRITE_ONCE(conn->ping_task, NULL);
 		iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
 		return -EIO;
 	} else if (!rhdr) {
 		/* only track our nops */
-		conn->ping_task = task;
 		conn->last_ping = jiffies;
 	}
 
@@ -1021,7 +1028,7 @@ static int iscsi_nop_out_rsp(struct iscsi_task *task,
 	struct iscsi_conn *conn = task->conn;
 	int rc = 0;
 
-	if (conn->ping_task != task) {
+	if (READ_ONCE(conn->ping_task) != task) {
 		/*
 		 * If this is not in response to one of our
 		 * nops then it must be from userspace.
@@ -1961,7 +1968,7 @@ static void iscsi_start_tx(struct iscsi_conn *conn)
  */
 static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
 {
-	if (conn->ping_task &&
+	if (READ_ONCE(conn->ping_task) &&
 	    time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
 			   (conn->ping_timeout * HZ), jiffies))
 		return 1;
@@ -2096,7 +2103,7 @@ enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
 	 * Checking the transport already or nop from a cmd timeout still
 	 * running
 	 */
-	if (conn->ping_task) {
+	if (READ_ONCE(conn->ping_task)) {
 		task->have_checked_conn = true;
 		rc = BLK_EH_RESET_TIMER;
 		goto done;
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index c9bd935f4fd1c..1ee0f30ae190b 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -145,6 +145,9 @@ struct iscsi_task {
 	void			*dd_data;	/* driver/transport data */
 };
 
+/* invalid scsi_task pointer */
+#define	INVALID_SCSI_TASK	(struct iscsi_task *)-1l
+
 static inline int iscsi_task_has_unsol_data(struct iscsi_task *task)
 {
 	return task->unsol_r2t.data_length > task->unsol_r2t.sent;
-- 
2.27.0

[PATCH AUTOSEL 4.14 11/12] scsi: target: iscsi: Fix cmd abort fabric stop race

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit f36199355c64a39fe82cfddc7623d827c7e050da ]

Maurizio found a race where the abort and cmd stop paths can race as
follows:

 1. thread1 runs iscsit_release_commands_from_conn and sets
    CMD_T_FABRIC_STOP.

 2. thread2 runs iscsit_aborted_task and then does __iscsit_free_cmd. It
    then returns from the aborted_task callout and we finish
    target_handle_abort and do:

    target_handle_abort -> transport_cmd_check_stop_to_fabric ->
	lio_check_stop_free -> target_put_sess_cmd

    The cmd is now freed.

 3. thread1 now finishes iscsit_release_commands_from_conn and runs
    iscsit_free_cmd while accessing a command we just released.

In __target_check_io_state we check for CMD_T_FABRIC_STOP and set the
CMD_T_ABORTED if the driver is not cleaning up the cmd because of a session
shutdown. However, iscsit_release_commands_from_conn only sets the
CMD_T_FABRIC_STOP and does not check to see if the abort path has claimed
completion ownership of the command.

This adds a check in iscsit_release_commands_from_conn so only the abort or
fabric stop path cleanup the command.

Link: https://lore.kernel.org/r/1605318378-9269-1-git-send-email-michael.christie@oracle.com
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/iscsi/iscsi_target.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index da80c03de6ea4..d9fcef82ddf59 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -490,8 +490,7 @@ EXPORT_SYMBOL(iscsit_queue_rsp);
 void iscsit_aborted_task(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
 {
 	spin_lock_bh(&conn->cmd_lock);
-	if (!list_empty(&cmd->i_conn_node) &&
-	    !(cmd->se_cmd.transport_state & CMD_T_FABRIC_STOP))
+	if (!list_empty(&cmd->i_conn_node))
 		list_del_init(&cmd->i_conn_node);
 	spin_unlock_bh(&conn->cmd_lock);
 
@@ -4086,12 +4085,22 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn)
 	spin_lock_bh(&conn->cmd_lock);
 	list_splice_init(&conn->conn_cmd_list, &tmp_list);
 
-	list_for_each_entry(cmd, &tmp_list, i_conn_node) {
+	list_for_each_entry_safe(cmd, cmd_tmp, &tmp_list, i_conn_node) {
 		struct se_cmd *se_cmd = &cmd->se_cmd;
 
 		if (se_cmd->se_tfo != NULL) {
 			spin_lock_irq(&se_cmd->t_state_lock);
-			se_cmd->transport_state |= CMD_T_FABRIC_STOP;
+			if (se_cmd->transport_state & CMD_T_ABORTED) {
+				/*
+				 * LIO's abort path owns the cleanup for this,
+				 * so put it back on the list and let
+				 * aborted_task handle it.
+				 */
+				list_move_tail(&cmd->i_conn_node,
+					       &conn->conn_cmd_list);
+			} else {
+				se_cmd->transport_state |= CMD_T_FABRIC_STOP;
+			}
 			spin_unlock_irq(&se_cmd->t_state_lock);
 		}
 	}
-- 
2.27.0

[PATCH AUTOSEL 4.14 12/12] perf/x86: fix sysfs type mismatches

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit ebd19fc372e3e78bf165f230e7c084e304441c08 ]

This change switches rapl to use PMU_FORMAT_ATTR, and fixes two other
macros to use device_attribute instead of kobj_attribute to avoid
callback type mismatches that trip indirect call checking with Clang's
Control-Flow Integrity (CFI).

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20201113183126.1239404-1-samitolvanen@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/cstate.c |  6 +++---
 arch/x86/events/intel/rapl.c   | 14 +-------------
 arch/x86/events/intel/uncore.c |  4 ++--
 arch/x86/events/intel/uncore.h | 12 ++++++------
 4 files changed, 12 insertions(+), 24 deletions(-)

diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 59521c71c98a4..4ebeaa3c67100 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -99,14 +99,14 @@
 MODULE_LICENSE("GPL");
 
 #define DEFINE_CSTATE_FORMAT_ATTR(_var, _name, _format)		\
-static ssize_t __cstate_##_var##_show(struct kobject *kobj,	\
-				struct kobj_attribute *attr,	\
+static ssize_t __cstate_##_var##_show(struct device *dev,	\
+				struct device_attribute *attr,	\
 				char *page)			\
 {								\
 	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);		\
 	return sprintf(page, _format "\n");			\
 }								\
-static struct kobj_attribute format_attr_##_var =		\
+static struct device_attribute format_attr_##_var =		\
 	__ATTR(_name, 0444, __cstate_##_var##_show, NULL)
 
 static ssize_t cstate_get_attr_cpumask(struct device *dev,
diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c
index d36a5fac6a18b..7d3f861e31654 100644
--- a/arch/x86/events/intel/rapl.c
+++ b/arch/x86/events/intel/rapl.c
@@ -115,18 +115,6 @@ static const char *const rapl_domain_names[NR_RAPL_DOMAINS] __initconst = {
  * any other bit is reserved
  */
 #define RAPL_EVENT_MASK	0xFFULL
-
-#define DEFINE_RAPL_FORMAT_ATTR(_var, _name, _format)		\
-static ssize_t __rapl_##_var##_show(struct kobject *kobj,	\
-				struct kobj_attribute *attr,	\
-				char *page)			\
-{								\
-	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);		\
-	return sprintf(page, _format "\n");			\
-}								\
-static struct kobj_attribute format_attr_##_var =		\
-	__ATTR(_name, 0444, __rapl_##_var##_show, NULL)
-
 #define RAPL_CNTR_WIDTH 32
 
 #define RAPL_EVENT_ATTR_STR(_name, v, str)					\
@@ -548,7 +536,7 @@ static struct attribute_group rapl_pmu_events_group = {
 	.attrs = NULL, /* patched at runtime */
 };
 
-DEFINE_RAPL_FORMAT_ATTR(event, event, "config:0-7");
+PMU_FORMAT_ATTR(event, "config:0-7");
 static struct attribute *rapl_formats_attr[] = {
 	&format_attr_event.attr,
 	NULL,
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index c56cb37b88e33..4ad93871508cd 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -90,8 +90,8 @@ struct pci2phy_map *__find_pci2phy_map(int segment)
 	return map;
 }
 
-ssize_t uncore_event_show(struct kobject *kobj,
-			  struct kobj_attribute *attr, char *buf)
+ssize_t uncore_event_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
 {
 	struct uncore_event_desc *event =
 		container_of(attr, struct uncore_event_desc, attr);
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 4364191e7c6b2..ae4ab89e16c7d 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -125,7 +125,7 @@ struct intel_uncore_box {
 #define UNCORE_BOX_FLAG_CTL_OFFS8	1 /* event config registers are 8-byte apart */
 
 struct uncore_event_desc {
-	struct kobj_attribute attr;
+	struct device_attribute attr;
 	const char *config;
 };
 
@@ -137,8 +137,8 @@ struct pci2phy_map {
 
 struct pci2phy_map *__find_pci2phy_map(int segment);
 
-ssize_t uncore_event_show(struct kobject *kobj,
-			  struct kobj_attribute *attr, char *buf);
+ssize_t uncore_event_show(struct device *dev,
+			  struct device_attribute *attr, char *buf);
 
 #define INTEL_UNCORE_EVENT_DESC(_name, _config)			\
 {								\
@@ -147,14 +147,14 @@ ssize_t uncore_event_show(struct kobject *kobj,
 }
 
 #define DEFINE_UNCORE_FORMAT_ATTR(_var, _name, _format)			\
-static ssize_t __uncore_##_var##_show(struct kobject *kobj,		\
-				struct kobj_attribute *attr,		\
+static ssize_t __uncore_##_var##_show(struct device *dev,		\
+				struct device_attribute *attr,		\
 				char *page)				\
 {									\
 	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);			\
 	return sprintf(page, _format "\n");				\
 }									\
-static struct kobj_attribute format_attr_##_var =			\
+static struct device_attribute format_attr_##_var =			\
 	__ATTR(_name, 0444, __uncore_##_var##_show, NULL)
 
 static inline unsigned uncore_pci_box_ctl(struct intel_uncore_box *box)
-- 
2.27.0