From: Chen-Yu Tsai <wens@kernel.org>
To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] arm64: dts: rockchip: rk3328-roc-cc: Misc improvements
Date: Thu, 26 Nov 2020 15:33:33 +0800 [thread overview]
Message-ID: <20201126073336.30794-1-wens@kernel.org> (raw)
From: Chen-Yu Tsai <wens@csie.org>
Hi,
Here are some improvements for the ROC-RK3328-CC.
Patch 1 sets dr_mode to "host" for OTG. Since the board has a type A
host port wired to the OTG controller, setting this is appropriate.
Patch 2 enables HDMI audio.
Patch 3 enables analog audio.
I opted to use one simple-card for each audio interface since a) the
definitions are already in the .dtsi file and b) having one card per
interface with proper names makes them easier to identify.
The changes are quite trivial. Hope they can be merged for the next
release.
Regards
ChenYu
Chen-Yu Tsai (3):
arm64: dts: rockchip: rk3328-roc-cc: Set dr_mode to "host" for OTG
arm64: dts: rockchip: rk3328-roc-cc: Enable HDMI audio
arm64: dts: rockchip: rk3328-roc-cc: Enable analog audio
.../arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
--
2.29.2
next reply other threads:[~2020-11-26 7:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-26 7:33 Chen-Yu Tsai [this message]
2020-11-26 7:33 ` [PATCH 1/3] arm64: dts: rockchip: rk3328-roc-cc: Set dr_mode to "host" for OTG Chen-Yu Tsai
2020-11-26 7:33 ` [PATCH 2/3] arm64: dts: rockchip: rk3328-roc-cc: Enable HDMI audio Chen-Yu Tsai
2020-11-26 7:33 ` [PATCH 3/3] arm64: dts: rockchip: rk3328-roc-cc: Enable analog audio Chen-Yu Tsai
2020-11-30 1:52 ` [PATCH 0/3] arm64: dts: rockchip: rk3328-roc-cc: Misc improvements Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201126073336.30794-1-wens@kernel.org \
--to=wens@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).