* [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v
@ 2020-11-27 3:35 Chris Ruehl
2020-11-29 12:29 ` Avri Altman
0 siblings, 1 reply; 2+ messages in thread
From: Chris Ruehl @ 2020-11-27 3:35 UTC (permalink / raw)
Cc: Chris Ruehl, Ulf Hansson, Michał Mirosław,
Gustavo A. R. Silva, Yoshihiro Shimoda, Matthias Schiffer,
Seungwon Jeon, Chris Ball, linux-mmc, linux-kernel
This patch remove the MMC_CAP2_HS200_1_8V_SDR capacity from
host->cap2 when the dt property mmc-hs400-1v8 set. It cause
error and occasionally hang on boot and reboot.
Board with this issue: rk3399 with SanDisk DG4008 eMMC.
This patch did not change the mmc-hs400-1_2v host->cap2
added the MMC_CAP2_HS200_1_2V_SDR.
Log shows a boot process with a HS400 5.1 capable SanDisk 8G
with mmc-hs400-1_8v dt property and the MMC_CAP2_HS200_1_8V_SDR
append to the host->cap2.
[ 1.775721] mmc1: CQHCI version 5.10
[ 1.802342] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 2.007581] mmc1: mmc_select_hs200 failed, error -110
[ 2.007589] mmc1: error -110 whilst initialising MMC card
[ 2.413559] mmc1: mmc_select_hs200 failed, error -110
[ 2.413562] mmc1: error -110 whilst initialising MMC card
[ 3.183343] mmc1: Command Queue Engine enabled
[ 3.183355] mmc1: new HS400 MMC card at address 0001
[ 3.197163] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[ 3.197256] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[ 3.197360] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[ 3.197479] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (242:0)
after patch applied
[ 1.746691] mmc1: CQHCI version 5.10
[ 1.773316] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.858410] mmc1: Command Queue Engine enabled
[ 1.858418] mmc1: new HS400 MMC card at address 0001
[ 1.858897] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[ 1.859002] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[ 1.859097] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[ 1.859182] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (242:0)
Fixes: c373eb489b27b mmc: core: add DT bindings for eMMC HS400 1.8/1.2V
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
drivers/mmc/core/host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 96b2ca1f1b06..f55113e24c68 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -295,7 +295,7 @@ int mmc_of_parse(struct mmc_host *host)
if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
- host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+ host->caps2 |= MMC_CAP2_HS400_1_8V;
if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* RE: [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v
2020-11-27 3:35 [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v Chris Ruehl
@ 2020-11-29 12:29 ` Avri Altman
0 siblings, 0 replies; 2+ messages in thread
From: Avri Altman @ 2020-11-29 12:29 UTC (permalink / raw)
To: Chris Ruehl
Cc: Ulf Hansson, Michał Mirosław, Gustavo A. R. Silva,
Yoshihiro Shimoda, Matthias Schiffer, Seungwon Jeon, Chris Ball,
linux-mmc, linux-kernel
> This patch remove the MMC_CAP2_HS200_1_8V_SDR capacity from
> host->cap2 when the dt property mmc-hs400-1v8 set. It cause
> error and occasionally hang on boot and reboot.
> Board with this issue: rk3399 with SanDisk DG4008 eMMC.
>
> This patch did not change the mmc-hs400-1_2v host->cap2
> added the MMC_CAP2_HS200_1_2V_SDR.
>
> Log shows a boot process with a HS400 5.1 capable SanDisk 8G
> with mmc-hs400-1_8v dt property and the MMC_CAP2_HS200_1_8V_SDR
> append to the host->cap2.
>
> [ 1.775721] mmc1: CQHCI version 5.10
> [ 1.802342] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci]
> using ADMA
> [ 2.007581] mmc1: mmc_select_hs200 failed, error -110
> [ 2.007589] mmc1: error -110 whilst initialising MMC card
> [ 2.413559] mmc1: mmc_select_hs200 failed, error -110
> [ 2.413562] mmc1: error -110 whilst initialising MMC card
> [ 3.183343] mmc1: Command Queue Engine enabled
> [ 3.183355] mmc1: new HS400 MMC card at address 0001
> [ 3.197163] mmcblk1: mmc1:0001 DG4008 7.28 GiB
> [ 3.197256] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
> [ 3.197360] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
> [ 3.197479] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev
> (242:0)
>
> after patch applied
> [ 1.746691] mmc1: CQHCI version 5.10
> [ 1.773316] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci]
> using ADMA
> [ 1.858410] mmc1: Command Queue Engine enabled
> [ 1.858418] mmc1: new HS400 MMC card at address 0001
> [ 1.858897] mmcblk1: mmc1:0001 DG4008 7.28 GiB
> [ 1.859002] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
> [ 1.859097] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
> [ 1.859182] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev
> (242:0)
>
> Fixes: c373eb489b27b mmc: core: add DT bindings for eMMC HS400 1.8/1.2V
>
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Acked-by: Avri Altman <avri.altman@wdc.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-11-29 12:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-27 3:35 [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v Chris Ruehl
2020-11-29 12:29 ` Avri Altman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).