[PATCH 04/22] dt-bindings: Add bindings for Keem Bay VPU IPC driver

[mgross@linux.intel.com]

From: Paul Murphy <paul.j.murphy@intel.com>

Add DT bindings documentation for the Keem Bay VPU IPC driver.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Paul Murphy <paul.j.murphy@intel.com>
Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
 .../soc/intel/intel,keembay-vpu-ipc.yaml      | 151 ++++++++++++++++++
 1 file changed, 151 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml

diff --git a/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml
new file mode 100644
index 000000000000..60d4a028563c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) Intel Corporation. All rights reserved.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/intel/intel,keembay-vpu-ipc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Keem Bay VPU IPC
+
+maintainers:
+  - Paul Murphy <paul.j.murphy@intel.com>
+
+description:
+  The VPU IPC driver facilitates loading of firmware, control, and communication
+  with the VPU over the IPC FIFO in the Intel Keem Bay SoC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - const: intel,keembay-vpu-ipc
+
+  reg:
+    items:
+      - description: NCE WDT registers
+      - description: NCE TIM_GEN_CONFIG registers
+      - description: MSS WDT registers
+      - description: MSS TIM_GEN_CONFIG registers
+
+  reg-names:
+    items:
+      - const: nce_wdt
+      - const: nce_tim_cfg
+      - const: mss_wdt
+      - const: mss_tim_cfg
+
+  memory-region:
+    items:
+      - description: reference to the VPU reserved memory region
+      - description: reference to the X509 reserved memory region
+      - description: reference to the MSS IPC area
+
+  clocks:
+    items:
+      - description: cpu clock
+      - description: pll 0 out 0 rate
+      - description: pll 0 out 1 rate
+      - description: pll 0 out 2 rate
+      - description: pll 0 out 3 rate
+      - description: pll 1 out 0 rate
+      - description: pll 1 out 1 rate
+      - description: pll 1 out 2 rate
+      - description: pll 1 out 3 rate
+      - description: pll 2 out 0 rate
+      - description: pll 2 out 1 rate
+      - description: pll 2 out 2 rate
+      - description: pll 2 out 3 rate
+
+  clocks-names:
+    items:
+      - const: cpu_clock
+      - const: pll_0_out_0
+      - const: pll_0_out_1
+      - const: pll_0_out_2
+      - const: pll_0_out_3
+      - const: pll_1_out_0
+      - const: pll_1_out_1
+      - const: pll_1_out_2
+      - const: pll_1_out_3
+      - const: pll_2_out_0
+      - const: pll_2_out_1
+      - const: pll_2_out_2
+      - const: pll_2_out_3
+
+  interrupts:
+    items:
+      - description: number of NCE sub-system WDT timeout IRQ
+      - description: number of MSS sub-system WDT timeout IRQ
+
+  interrupt-names:
+    items:
+      - const: nce_wdt
+      - const: mss_wdt
+
+  intel,keembay-vpu-ipc-nce-wdt-redirect:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      Number to which we will request that the NCE sub-system
+      re-directs it's WDT timeout IRQ
+
+  intel,keembay-vpu-ipc-mss-wdt-redirect:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      Number to which we will request that the MSS sub-system
+      re-directs it's WDT timeout IRQ
+
+  intel,keembay-vpu-ipc-imr:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      IMR (isolated memory region) number which we will request
+      the runtime service uses to protect the VPU memory region
+      before authentication
+
+  intel,keembay-vpu-ipc-id:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: The VPU ID to be passed to the VPU firmware.
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    vpu-ipc@3f00209c {
+        compatible = "intel,keembay-vpu-ipc";
+        reg = <0x3f00209c 0x10>,
+              <0x3f003008 0x4>,
+              <0x2082009c 0x10>,
+              <0x20821008 0x4>;
+        reg-names = "nce_wdt",
+                    "nce_tim_cfg",
+                    "mss_wdt",
+                    "mss_tim_cfg";
+        memory-region = <&vpu_reserved>,
+                        <&vpu_x509_reserved>,
+                        <&mss_ipc_reserved>;
+        clocks = <&scmi_clk 0>,
+                 <&scmi_clk 0>,
+                 <&scmi_clk 1>,
+                 <&scmi_clk 2>,
+                 <&scmi_clk 3>,
+                 <&scmi_clk 4>,
+                 <&scmi_clk 5>,
+                 <&scmi_clk 6>,
+                 <&scmi_clk 7>,
+                 <&scmi_clk 8>,
+                 <&scmi_clk 9>,
+                 <&scmi_clk 10>,
+                 <&scmi_clk 11>;
+        clock-names = "cpu_clock",
+                      "pll_0_out_0", "pll_0_out_1",
+                      "pll_0_out_2", "pll_0_out_3",
+                      "pll_1_out_0", "pll_1_out_1",
+                      "pll_1_out_2", "pll_1_out_3",
+                      "pll_2_out_0", "pll_2_out_1",
+                      "pll_2_out_2", "pll_2_out_3";
+        interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "nce_wdt", "mss_wdt";
+        intel,keembay-vpu-ipc-nce-wdt-redirect = <63>;
+        intel,keembay-vpu-ipc-mss-wdt-redirect = <47>;
+        intel,keembay-vpu-ipc-imr = <9>;
+        intel,keembay-vpu-ipc-id = <0>;
+    };
-- 
2.17.1