archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <>
To: Matthew Wilcox <>
	Andrew Morton <>,
	Hugh Dickins <>,
	Andrea Arcangeli <>,
	Mike Rapoport <>,
	David Hildenbrand <>
Subject: Re: [PATCH v2] mm: Don't fault around userfaultfd-registered regions on reads
Date: Tue, 1 Dec 2020 17:30:33 -0500	[thread overview]
Message-ID: <20201201223033.GG3277@xz-x1> (raw)
In-Reply-To: <>

On Tue, Dec 01, 2020 at 12:59:27PM +0000, Matthew Wilcox wrote:
> On Mon, Nov 30, 2020 at 06:06:03PM -0500, Peter Xu wrote:
> > Faulting around for reads are in most cases helpful for the performance so that
> > continuous memory accesses may avoid another trip of page fault.  However it
> > may not always work as expected.
> > 
> > For example, userfaultfd registered regions may not be the best candidate for
> > pre-faults around the reads.
> > 
> > For missing mode uffds, fault around does not help because if the page cache
> > existed, then the page should be there already.  If the page cache is not
> > there, nothing else we can do, either.  If the fault-around code is destined to
> > be helpless for userfault-missing vmas, then ideally we can skip it.
> This sounds like you're thinking of a file which has exactly one user.
> If there are multiple processes mapping the same file, then no, there's
> no reason to expect a page to be already present in the page table,
> just because it's present in the page cache.
> > For wr-protected mode uffds, errornously fault in those pages around could lead
> > to threads accessing the pages without uffd server's awareness.  For example,
> > when punching holes on uffd-wp registered shmem regions, we'll first try to
> > unmap all the pages before evicting the page cache but without locking the
> > page (please refer to shmem_fallocate(), where unmap_mapping_range() is called
> > before shmem_truncate_range()).  When fault-around happens near a hole being
> > punched, we might errornously fault in the "holes" right before it will be
> > punched.  Then there's a small window before the page cache was finally
> > dropped, and after the page will be writable again (NOTE: the uffd-wp protect
> > information is totally lost due to the pre-unmap in shmem_fallocate(), so the
> > page can be writable within the small window).  That's severe data loss.
> This still doesn't make sense.  If the page is Uptodate in the page
> cache, then userspace gets to access it.  If you don't want the page to
> be accessible, ClearPageUptodate().  read() can also access it if it's
> marked Uptodate.  A write fault on a page will call the filesystem's
> page_mkwrite() and you can block it there.

I still don't think the page_mkwrite() could help here... Though Andrea pointed
out an more important issue against swap cache (in the v1 thread [1]).  Indeed
if we have those figured out maybe we'll also rethink this patch then it could
become optional; while that seems to be required to allow shmem swap in/out
with uffd-wp which I haven't yet tested.  As Hugh pointed out, purely reuse the
_PAGE_SWP_UFFD_WP in swap cache may not work trivially since uffd-wp is per-pte
rather than per-page, so I probably need to think a bit more on how to do

I don't know whether a patch like this could still be good in the future.  For
now, let's drop this patch until we solve all the rest of the puzzle.

My thanks to all the reviewers, and sorry for the noise!

NAK myself.


Peter Xu

  reply	other threads:[~2020-12-01 22:32 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-30 23:06 [PATCH v2] mm: Don't fault around userfaultfd-registered regions on reads Peter Xu
2020-12-01  9:30 ` David Hildenbrand
2020-12-01 12:59 ` Matthew Wilcox
2020-12-01 22:30   ` Peter Xu [this message]
2020-12-02  0:02     ` Andrea Arcangeli
2020-12-02 22:37       ` Hugh Dickins
2020-12-02 23:41         ` Peter Xu
2020-12-03  5:36           ` Hugh Dickins
2020-12-03 18:02             ` Peter Xu
2020-12-03 19:44               ` Andrea Arcangeli
2020-12-04  2:30                 ` Peter Xu
2020-12-04  4:10                   ` Andrea Arcangeli
2020-12-04  5:59                     ` Hugh Dickins
2020-12-04 16:50                       ` Peter Xu
2020-12-04 18:12                     ` Andrea Arcangeli
2020-12-04 19:23                       ` Peter Xu
2020-12-04 19:37                         ` Andrea Arcangeli
2020-12-04 20:21                           ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201201223033.GG3277@xz-x1 \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).