linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Icenowy Zheng <icenowy@aosc.xyz>,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Yangtao Li <frank@allwinnertech.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 8/8] arm64: dts: allwinner: Add OrangePi Zero 2 .dts
Date: Wed, 2 Dec 2020 17:07:02 +0100	[thread overview]
Message-ID: <20201202160702.rdigwtcv3avil4n3@gilmour> (raw)
In-Reply-To: <20201202135409.13683-9-andre.przywara@arm.com>

[-- Attachment #1: Type: text/plain, Size: 6853 bytes --]

On Wed, Dec 02, 2020 at 01:54:09PM +0000, Andre Przywara wrote:
> The OrangePi Zero 2 is a development board with the new H616 SoC.
> 
> It features the usual connectors used on those small boards, and comes
> with the AXP305, which seems to be compatible with the AXP805.
> 
> For more details see: http://linux-sunxi.org/Xunlong_Orange_Pi_Zero2
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../allwinner/sun50i-h616-orangepi-zero2.dts  | 228 ++++++++++++++++++
>  2 files changed, 229 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 211d1e9d4701..0cf8299b1ce7 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -35,3 +35,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> new file mode 100644
> index 000000000000..814f5b4fec7c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
> @@ -0,0 +1,228 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2020 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	model = "OrangePi Zero2";
> +	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";

This needs to be documented too

> +	aliases {
> +		ethernet0 = &emac0;
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		power {
> +			label = "orangepi:red:power";
> +			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
> +			default-state = "on";
> +		};
> +
> +		status {
> +			label = "orangepi:green:status";
> +			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
> +		};

Those node names don't follow the led binding convention

> +	};
> +
> +	reg_vcc5v: vcc5v {
> +		/* board wide 5V supply directly from the USB-C socket */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-5v";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_usb1_vbus: usb1-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb1-vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		enable-active-high;
> +		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
> +		status = "okay";
> +	};
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +/* USB 2 & 3 are on headers only. */
> +
> +&emac0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ext_rgmii_pins>;
> +	phy-mode = "rgmii";
> +	phy-handle = <&ext_rgmii_phy>;
> +	phy-supply = <&reg_dcdce>;
> +	allwinner,rx-delay-ps = <3100>;
> +	allwinner,tx-delay-ps = <700>;
> +	status = "okay";
> +};
> +
> +&mdio {
> +	ext_rgmii_phy: ethernet-phy@1 {
> +		compatible = "ethernet-phy-ieee802.3-c22";
> +		reg = <1>;
> +	};
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_dcdce>;
> +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&r_i2c {
> +	status = "okay";
> +
> +	axp305: pmic@36 {
> +		compatible = "x-powers,axp305", "x-powers,axp805",
> +			     "x-powers,axp806";
> +		reg = <0x36>;
> +
> +		/* dummy interrupt to appease the driver for now */
> +		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		x-powers,self-working-mode;
> +		vina-supply = <&reg_vcc5v>;
> +		vinb-supply = <&reg_vcc5v>;
> +		vinc-supply = <&reg_vcc5v>;
> +		vind-supply = <&reg_vcc5v>;
> +		vine-supply = <&reg_vcc5v>;
> +		aldoin-supply = <&reg_vcc5v>;
> +		bldoin-supply = <&reg_vcc5v>;
> +		cldoin-supply = <&reg_vcc5v>;
> +
> +		regulators {
> +			reg_aldo1: aldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc-sys";
> +			};
> +
> +			reg_aldo2: aldo2 {
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc3v3-ext";
> +			};
> +
> +			reg_aldo3: aldo3 {
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc3v3-ext2";
> +			};
> +
> +			reg_bldo1: bldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc1v8";
> +			};
> +
> +			bldo2 {
> +				/* unused */
> +			};
> +
> +			bldo3 {
> +				/* unused */
> +			};
> +
> +			bldo4 {
> +				/* unused */
> +			};
> +
> +			cldo1 {
> +				/* reserved */
> +			};
> +
> +			cldo2 {
> +				/* unused */
> +			};
> +
> +			cldo3 {
> +				/* unused */
> +			};
> +
> +			reg_dcdca: dcdca {
> +				regulator-always-on;
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <1080000>;
> +				regulator-name = "vdd-cpu";
> +			};
> +
> +			reg_dcdcc: dcdcc {
> +				regulator-always-on;
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <1080000>;
> +				regulator-name = "vdd-gpu-sys";
> +			};
> +
> +			reg_dcdcd: dcdcd {
> +				regulator-always-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-name = "vdd-dram";
> +			};
> +
> +			reg_dcdce: dcdce {
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc-eth-mmc";
> +			};
> +
> +			sw {
> +				/* unused */
> +			};
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	usb0_vbus-supply = <&reg_vcc5v>;
> +	usb1_vbus-supply = <&reg_usb1_vbus>;
> +	status = "okay";
> +};

Did you really test it as OTG without an ID pin?

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  parent reply	other threads:[~2020-12-02 16:08 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-02 13:54 [PATCH 0/8] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2020-12-02 13:54 ` [PATCH 1/8] clk: sunxi-ng: h6: Fix clock divider range on some clocks Andre Przywara
2020-12-02 16:17   ` Jernej Škrabec
2020-12-02 13:54 ` [PATCH 2/8] pinctrl: sunxi: Add support for the Allwinner H616 pin controller Andre Przywara
2020-12-02 15:52   ` Maxime Ripard
2020-12-05 22:41     ` Linus Walleij
2020-12-02 18:15   ` Jernej Škrabec
2020-12-06 12:32   ` [linux-sunxi] " Clément Péron
2020-12-06 12:42     ` Jernej Škrabec
2020-12-06 14:52       ` André Przywara
2020-12-06 16:01         ` Icenowy Zheng
2020-12-07  1:07           ` André Przywara
2020-12-07  1:45             ` André Przywara
2020-12-13 16:27   ` Icenowy Zheng
2020-12-14  9:26     ` Chen-Yu Tsai
2020-12-02 13:54 ` [PATCH 3/8] pinctrl: sunxi: Add support for the Allwinner H616-R " Andre Przywara
2020-12-02 15:54   ` Maxime Ripard
2020-12-02 17:55   ` Jernej Škrabec
2020-12-02 13:54 ` [PATCH 4/8] clk: sunxi-ng: Add support for the Allwinner H616 R-CCU Andre Przywara
2020-12-02 14:31   ` Icenowy Zheng
2020-12-03 11:07     ` André Przywara
2020-12-03 14:02       ` [linux-sunxi] " Icenowy Zheng
2020-12-02 18:20   ` Jernej Škrabec
2020-12-03  2:44     ` Samuel Holland
2020-12-03 10:52     ` André Przywara
2020-12-02 13:54 ` [PATCH 5/8] clk: sunxi-ng: Add support for the Allwinner H616 CCU Andre Przywara
2020-12-02 15:56   ` Maxime Ripard
2020-12-02 21:03   ` Jernej Škrabec
2020-12-02 23:06     ` André Przywara
2020-12-05 16:36       ` [linux-sunxi] " Icenowy Zheng
2020-12-09 14:33   ` [linux-sunxi] " Clément Péron
2020-12-09 21:35     ` André Przywara
2020-12-09 22:20       ` Jernej Škrabec
2020-12-09 22:45         ` André Przywara
2020-12-10 13:31   ` Icenowy Zheng
2020-12-10 14:34     ` André Przywara
2020-12-02 13:54 ` [PATCH 6/8] mmc: sunxi: add support for A100 mmc controller Andre Przywara
2020-12-02 13:54 ` [PATCH 7/8] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2020-12-02 16:03   ` Icenowy Zheng
2020-12-02 16:19     ` André Przywara
2020-12-02 16:05   ` Maxime Ripard
2020-12-02 16:13     ` Icenowy Zheng
2020-12-03  3:10     ` Samuel Holland
2020-12-02 16:33   ` Jernej Škrabec
2020-12-03  1:35     ` André Przywara
2020-12-03  3:16   ` Samuel Holland
2020-12-03 10:53     ` André Przywara
2020-12-03 15:02       ` [linux-sunxi] " Chen-Yu Tsai
2020-12-03 15:44         ` André Przywara
2020-12-03 16:20           ` Chen-Yu Tsai
2020-12-08  0:47             ` André Przywara
2020-12-02 13:54 ` [PATCH 8/8] arm64: dts: allwinner: Add OrangePi Zero 2 .dts Andre Przywara
2020-12-02 15:57   ` Icenowy Zheng
2020-12-02 16:43     ` André Przywara
2020-12-02 16:07   ` Maxime Ripard [this message]
2020-12-02 16:25     ` Jernej Škrabec
2020-12-06 12:51   ` [linux-sunxi] " Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202160702.rdigwtcv3avil4n3@gilmour \
    --to=maxime@cerno.tech \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frank@allwinnertech.com \
    --cc=icenowy@aosc.xyz \
    --cc=jernej.skrabec@siol.net \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).