linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Brazdil <dbrazdil@google.com>
To: kvmarm@lists.cs.columbia.edu
Cc: Jonathan Corbet <corbet@lwn.net>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Marc Zyngier <maz@kernel.org>,
	James Morse <james.morse@arm.com>,
	Julien Thierry <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Dennis Zhou <dennis@kernel.org>, Tejun Heo <tj@kernel.org>,
	Christoph Lameter <cl@linux.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Sudeep Holla <sudeep.holla@arm.com>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kernel-team@android.com,
	David Brazdil <dbrazdil@google.com>
Subject: [PATCH v4 15/26] kvm: arm64: Add SMC handler in nVHE EL2
Date: Wed,  2 Dec 2020 18:41:11 +0000	[thread overview]
Message-ID: <20201202184122.26046-16-dbrazdil@google.com> (raw)
In-Reply-To: <20201202184122.26046-1-dbrazdil@google.com>

Add handler of host SMCs in KVM nVHE trap handler. Forward all SMCs to
EL3 and propagate the result back to EL1. This is done in preparation
for validating host SMCs in KVM protected mode.

The implementation assumes that firmware uses SMCCC v1.2 or older. That
means x0-x17 can be used both for arguments and results, other GPRs are
preserved.

Signed-off-by: David Brazdil <dbrazdil@google.com>
---
 arch/arm64/kvm/hyp/nvhe/host.S     | 38 ++++++++++++++++++++++++++++++
 arch/arm64/kvm/hyp/nvhe/hyp-main.c | 35 ++++++++++++++++++++++++---
 2 files changed, 70 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index fe2740b224cf..2b56f0bdf874 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -180,3 +180,41 @@ SYM_CODE_START(__kvm_hyp_host_vector)
 	invalid_host_el1_vect			// FIQ 32-bit EL1
 	invalid_host_el1_vect			// Error 32-bit EL1
 SYM_CODE_END(__kvm_hyp_host_vector)
+
+/*
+ * Forward SMC with arguments in struct kvm_cpu_context, and
+ * store the result into the same struct. Assumes SMCCC 1.2 or older.
+ *
+ * x0: struct kvm_cpu_context*
+ */
+SYM_CODE_START(__kvm_hyp_host_forward_smc)
+	/*
+	 * Use x18 to keep the pointer to the host context because
+	 * x18 is callee-saved in SMCCC but not in AAPCS64.
+	 */
+	mov	x18, x0
+
+	ldp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	smc	#0
+
+	stp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	stp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	stp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	ret
+SYM_CODE_END(__kvm_hyp_host_forward_smc)
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index a4f1cac714d7..f25680ede080 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -18,6 +18,8 @@
 
 DEFINE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
+void __kvm_hyp_host_forward_smc(struct kvm_cpu_context *host_ctxt);
+
 static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct kvm_vcpu *, vcpu, host_ctxt, 1);
@@ -152,12 +154,39 @@ static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
 	cpu_reg(host_ctxt, 0) = SMCCC_RET_NOT_SUPPORTED;
 }
 
+static void default_host_smc_handler(struct kvm_cpu_context *host_ctxt)
+{
+	__kvm_hyp_host_forward_smc(host_ctxt);
+}
+
+static void skip_host_instruction(void)
+{
+	write_sysreg_el2(read_sysreg_el2(SYS_ELR) + 4, SYS_ELR);
+}
+
+static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	default_host_smc_handler(host_ctxt);
+
+	/*
+	 * Unlike HVC, the return address of an SMC is the instruction's PC.
+	 * Move the return address past the instruction.
+	 */
+	skip_host_instruction();
+}
+
 void handle_trap(struct kvm_cpu_context *host_ctxt)
 {
 	u64 esr = read_sysreg_el2(SYS_ESR);
 
-	if (unlikely(ESR_ELx_EC(esr) != ESR_ELx_EC_HVC64))
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_HVC64:
+		handle_host_hcall(host_ctxt);
+		break;
+	case ESR_ELx_EC_SMC64:
+		handle_host_smc(host_ctxt);
+		break;
+	default:
 		hyp_panic();
-
-	handle_host_hcall(host_ctxt);
+	}
 }
-- 
2.29.2.454.gaff20da3a2-goog


  parent reply	other threads:[~2020-12-02 18:43 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-02 18:40 [PATCH v4 00/26] Opt-in always-on nVHE hypervisor David Brazdil
2020-12-02 18:40 ` [PATCH v4 01/26] kvm: arm64: Add kvm-arm.mode early kernel parameter David Brazdil
2020-12-02 18:40 ` [PATCH v4 02/26] kvm: arm64: Add ARM64_KVM_PROTECTED_MODE CPU capability David Brazdil
2020-12-02 18:40 ` [PATCH v4 03/26] psci: Support psci_ops.get_version for v0.1 David Brazdil
2020-12-02 18:41 ` [PATCH v4 04/26] psci: Split functions to v0.1 and v0.2+ variants David Brazdil
2020-12-03 10:42   ` Mark Rutland
2020-12-02 18:41 ` [PATCH v4 05/26] psci: Replace psci_function_id array with a struct David Brazdil
2020-12-03 10:43   ` Mark Rutland
2020-12-02 18:41 ` [PATCH v4 06/26] psci: Add accessor for psci_0_1_function_ids David Brazdil
2020-12-03 10:47   ` Mark Rutland
2020-12-03 10:51     ` David Brazdil
2020-12-02 18:41 ` [PATCH v4 07/26] arm64: Make cpu_logical_map() take unsigned int David Brazdil
2020-12-02 18:41 ` [PATCH v4 08/26] arm64: Extract parts of el2_setup into a macro David Brazdil
2020-12-02 18:41 ` [PATCH v4 09/26] kvm: arm64: Remove vector_ptr param of hyp-init David Brazdil
2020-12-02 18:41 ` [PATCH v4 10/26] kvm: arm64: Move hyp-init params to a per-CPU struct David Brazdil
2020-12-02 18:41 ` [PATCH v4 11/26] kvm: arm64: Init MAIR/TCR_EL2 from params struct David Brazdil
2020-12-02 18:41 ` [PATCH v4 12/26] kvm: arm64: Add .hyp.data..ro_after_init ELF section David Brazdil
2020-12-02 18:41 ` [PATCH v4 13/26] kvm: arm64: Support per_cpu_ptr in nVHE hyp code David Brazdil
2020-12-02 18:41 ` [PATCH v4 14/26] kvm: arm64: Create nVHE copy of cpu_logical_map David Brazdil
2020-12-02 18:41 ` David Brazdil [this message]
2020-12-03 13:31   ` [PATCH v4 15/26] kvm: arm64: Add SMC handler in nVHE EL2 Marc Zyngier
2020-12-02 18:41 ` [PATCH v4 16/26] kvm: arm64: Bootstrap PSCI " David Brazdil
2020-12-03 10:55   ` Mark Rutland
2020-12-03 13:46   ` Marc Zyngier
2020-12-02 18:41 ` [PATCH v4 17/26] kvm: arm64: Add offset for hyp VA <-> PA conversion David Brazdil
2020-12-07 22:29   ` Qian Cai
2020-12-08 10:08     ` David Brazdil
2020-12-02 18:41 ` [PATCH v4 18/26] kvm: arm64: Forward safe PSCI SMCs coming from host David Brazdil
2020-12-02 18:41 ` [PATCH v4 19/26] kvm: arm64: Extract __do_hyp_init into a helper function David Brazdil
2020-12-02 18:41 ` [PATCH v4 20/26] kvm: arm64: Add function to enter host from KVM nVHE hyp code David Brazdil
2020-12-02 18:41 ` [PATCH v4 21/26] kvm: arm64: Intercept host's CPU_ON SMCs David Brazdil
2020-12-02 18:41 ` [PATCH v4 22/26] kvm: arm64: Intercept host's CPU_SUSPEND PSCI SMCs David Brazdil
2020-12-02 18:41 ` [PATCH v4 23/26] kvm: arm64: Intercept host's SYSTEM_SUSPEND " David Brazdil
2020-12-02 18:41 ` [PATCH v4 24/26] kvm: arm64: Keep nVHE EL2 vector installed David Brazdil
2020-12-02 18:41 ` [PATCH v4 25/26] kvm: arm64: Trap host SMCs in protected mode David Brazdil
2020-12-02 18:41 ` [PATCH v4 26/26] kvm: arm64: Fix EL2 mode availability checks David Brazdil
2020-12-03 19:23 ` [PATCH v4 00/26] Opt-in always-on nVHE hypervisor Marc Zyngier
2020-12-08 19:14   ` David Brazdil
2020-12-08 20:12     ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202184122.26046-16-dbrazdil@google.com \
    --to=dbrazdil@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=cl@linux.com \
    --cc=corbet@lwn.net \
    --cc=dennis@kernel.org \
    --cc=james.morse@arm.com \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=kernel-team@android.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tj@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).