linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
	tiwai@suse.de, broonie@kernel.org, gregkh@linuxfoundation.org,
	jank@cadence.com, srinivas.kandagatla@linaro.org,
	rander.wang@linux.intel.com, ranjani.sridharan@linux.intel.com,
	hui.wang@canonical.com, pierre-louis.bossart@linux.intel.com,
	sanyog.r.kale@intel.com, bard.liao@intel.com
Subject: [PATCH 6/7] soundwire: bus: fix confusion on device used by pm_runtime
Date: Thu,  3 Dec 2020 04:46:44 +0800	[thread overview]
Message-ID: <20201202204645.23891-7-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20201202204645.23891-1-yung-chuan.liao@linux.intel.com>

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Intel stress-tests routinely report IO timeouts and invalid power
management transitions. Upon further analysis, we seem to be using the
wrong devices in pm_runtime calls.

Before reading and writing registers, we first need to make sure the
Slave is fully resumed. The existing code attempts to do such that,
however because of a confusion dating from 2017 and copy/paste, we
end-up resuming the parent only instead of resuming the codec device.

This can lead to accesses to the Slave registers while the bus is
still being configured and the Slave not enumerated, and as a result
IO errors occur.

This is a classic problem, similar confusions happened for HDaudio
between bus and codec device, leading to power management issues.

Fix by using the relevant device for all uses of pm_runtime functions.

Fixes: 60ee9be255712 ('soundwire: bus: add PM/no-PM versions of read/write functions')
Fixes: aa79293517b39 ('soundwire: bus: fix io error when processing alert event')
Fixes: 9d715fa005ebc ('soundwire: Add IO transfer')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/bus.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index c5ea59673dee..c317f41eba4e 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -514,16 +514,16 @@ int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(slave->bus->dev);
+	ret = pm_runtime_get_sync(&slave->dev);
 	if (ret < 0 && ret != -EACCES) {
-		pm_runtime_put_noidle(slave->bus->dev);
+		pm_runtime_put_noidle(&slave->dev);
 		return ret;
 	}
 
 	ret = sdw_nread_no_pm(slave, addr, count, val);
 
-	pm_runtime_mark_last_busy(slave->bus->dev);
-	pm_runtime_put(slave->bus->dev);
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
 
 	return ret;
 }
@@ -540,16 +540,16 @@ int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(slave->bus->dev);
+	ret = pm_runtime_get_sync(&slave->dev);
 	if (ret < 0 && ret != -EACCES) {
-		pm_runtime_put_noidle(slave->bus->dev);
+		pm_runtime_put_noidle(&slave->dev);
 		return ret;
 	}
 
 	ret = sdw_nwrite_no_pm(slave, addr, count, val);
 
-	pm_runtime_mark_last_busy(slave->bus->dev);
-	pm_runtime_put(slave->bus->dev);
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
 
 	return ret;
 }
@@ -1454,7 +1454,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
 	ret = pm_runtime_get_sync(&slave->dev);
 	if (ret < 0 && ret != -EACCES) {
 		dev_err(&slave->dev, "Failed to resume device: %d\n", ret);
-		pm_runtime_put_noidle(slave->bus->dev);
+		pm_runtime_put_noidle(&slave->dev);
 		return ret;
 	}
 
-- 
2.17.1


  parent reply	other threads:[~2020-12-03  8:43 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-02 20:46 [PATCH 0/7] soundwire/regmap: use _no_pm routines Bard Liao
2020-12-02 20:46 ` [PATCH 1/7] soundwire: bus: use sdw_update_no_pm when initializing a device Bard Liao
2020-12-05  7:45   ` Vinod Koul
2020-12-05 14:59     ` Pierre-Louis Bossart
2020-12-07  4:43       ` Vinod Koul
2020-12-07 15:31         ` Pierre-Louis Bossart
2020-12-08  4:56           ` Vinod Koul
2020-12-02 20:46 ` [PATCH 2/7] soundwire: bus: use sdw_write_no_pm when setting the bus scale registers Bard Liao
2020-12-02 20:46 ` [PATCH 3/7] soundwire: bus: use no_pm IO routines for all interrupt handling Bard Liao
2020-12-02 20:46 ` [PATCH 4/7] soundwire/regmap: use _no_pm functions in regmap_read/write Bard Liao
2020-12-05  7:45   ` Vinod Koul
2020-12-05 14:43     ` Pierre-Louis Bossart
2020-12-02 20:46 ` [PATCH 5/7] regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ Bard Liao
2020-12-05  7:46   ` Vinod Koul
2020-12-05 14:52     ` Pierre-Louis Bossart
2020-12-05 16:31       ` Greg KH
2020-12-07  4:47         ` Vinod Koul
2020-12-02 20:46 ` Bard Liao [this message]
2020-12-02 20:46 ` [PATCH 7/7] soundwire: bus: clarify dev_err/dbg device references Bard Liao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201202204645.23891-7-yung-chuan.liao@linux.intel.com \
    --to=yung-chuan.liao@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bard.liao@intel.com \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hui.wang@canonical.com \
    --cc=jank@cadence.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rander.wang@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=sanyog.r.kale@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.de \
    --cc=vinod.koul@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).