From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 336A0C8300F for ; Wed, 2 Dec 2020 20:54:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id CD9E8221FA for ; Wed, 2 Dec 2020 20:54:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729663AbgLBUyV (ORCPT ); Wed, 2 Dec 2020 15:54:21 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46188 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727395AbgLBUyU (ORCPT ); Wed, 2 Dec 2020 15:54:20 -0500 Received: from mail-pl1-x644.google.com (mail-pl1-x644.google.com [IPv6:2607:f8b0:4864:20::644]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0E37AC0613D6 for ; Wed, 2 Dec 2020 12:53:40 -0800 (PST) Received: by mail-pl1-x644.google.com with SMTP id 4so1807646plk.5 for ; Wed, 02 Dec 2020 12:53:40 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=AKSmXXeXFeN7ejezYL0YjI+uHvyPOnE8Nf7p/BnjGqs=; b=XFsLWCjJIexscquJ+fOSYzEVcRB6+7qS998YoIldxjugTzQtruw9ARO1brlWIz/SkI KplF6E9wuntYGLJ+M2che0crlU8L+/jHMJzkCxOKDQnmmRpYngc+lDYgOyz+u9e6TcLG f7M2Eq31I+J4kkqqVRU6VU080z7E7iNEZXy6kxnTSYfn6Nt9uf+V+AaMjQ/iFjTFY7Bo 8YXqqtae1fgXqH8mgfw/xc/dlzksjSsePAJlknjKi2znZbuDFE6DgZTJAHZIarM9jSyv T/7PjkXSmLFYcjKy69SqjDw7HjHAu8rp5e4cF0fDA6PNR5cN3e3qMMgKWJn9BZWpi5UX aPTQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=AKSmXXeXFeN7ejezYL0YjI+uHvyPOnE8Nf7p/BnjGqs=; b=t5AXLzkNv4Bvm/GWqw0OxsiSEqORi9Krk9pGaWhElFd3Zx+1f+Usw6FklxV+LuEt6+ cysYr9C7JLPBMjVLY5VltbHr+fHDNgJTyQ7aV4Byb4b0T4Tx/njTAebTJWgNOnwYrho8 Pg4s6Ndh6MxYomF4A1Bzz3lpoTLlbq2hqZbwGxi5uu0FDuNOz4dFaVJ2Sr0e7BSzngNo sbdIC9EzZOKRv6hS1/wWILpMVmmUl0SXhGu89FrKnJr126PeWyETgTd3dYR2JdkT+ctm f7TyU0sTkIBaqzoaZXYnR79b45m2lZnNvwyO2MJZXFhxQnqChNSuJEQtsP/rfMgaX2be scbA== X-Gm-Message-State: AOAM530sIC6AvM+DyWMkewK7nCET41yqzN7THxWH5Hi7yShekSc+TpRh ydfHzzjIScbZ2MFPXCCEm9fVHg== X-Google-Smtp-Source: ABdhPJziK229vr5c64qgMgRSiozOspC+doTGHC3ferf5FlchHu9fDyhKdXx8njXRc6EAk2yEm5tevg== X-Received: by 2002:a17:90a:cce:: with SMTP id 14mr1567788pjt.163.1606942419370; Wed, 02 Dec 2020 12:53:39 -0800 (PST) Received: from xps15 (S0106889e681aac74.cg.shawcable.net. [68.147.0.187]) by smtp.gmail.com with ESMTPSA id m4sm622489pfd.203.2020.12.02.12.53.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Dec 2020 12:53:38 -0800 (PST) Date: Wed, 2 Dec 2020 13:53:36 -0700 From: Mathieu Poirier To: Grzegorz Jaszczyk Cc: ohad@wizery.com, bjorn.andersson@linaro.org, s-anna@ti.com, linux-remoteproc@vger.kernel.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: Re: [PATCH v2 2/6] remoteproc/pru: Add a PRU remoteproc driver Message-ID: <20201202205336.GD1282360@xps15> References: <20201119140850.12268-1-grzegorz.jaszczyk@linaro.org> <20201119140850.12268-3-grzegorz.jaszczyk@linaro.org> <20201201225436.GB1240310@xps15> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20201201225436.GB1240310@xps15> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Dec 01, 2020 at 03:54:36PM -0700, Mathieu Poirier wrote: > Hi Grzeg, > > I have started to review this set - comments will come over the next few days. > > See below for a start. > > On Thu, Nov 19, 2020 at 03:08:46PM +0100, Grzegorz Jaszczyk wrote: > > From: Suman Anna > > > > The Programmable Real-Time Unit Subsystem (PRUSS) consists of > > dual 32-bit RISC cores (Programmable Real-Time Units, or PRUs) > > for program execution. This patch adds a remoteproc platform > > driver for managing the individual PRU RISC cores life cycle. > > > > The PRUs do not have a unified address space (have an Instruction > > RAM and a primary Data RAM at both 0x0). The PRU remoteproc driver > > therefore uses a custom remoteproc core ELF loader ops. The added > > .da_to_va ops is only used to provide translations for the PRU > > Data RAMs. This remoteproc driver does not have support for error > > recovery and system suspend/resume features. Different compatibles > > are used to allow providing scalability for instance-specific device > > data if needed. The driver uses a default firmware-name retrieved > > from device-tree for each PRU core, and the firmwares are expected > > to be present in the standard Linux firmware search paths. They can > > also be adjusted by userspace if required through the sysfs interface > > provided by the remoteproc core. > > > > The PRU remoteproc driver uses a client-driven boot methodology: it > > does _not_ support auto-boot so that the PRU load and boot is dictated > > by the corresponding client drivers for achieving various usecases. > > This allows flexibility for the client drivers or applications to set > > a firmware name (if needed) based on their desired functionality and > > boot the PRU. The sysfs bind and unbind attributes have also been > > suppressed so that the PRU devices cannot be unbound and thereby > > shutdown a PRU from underneath a PRU client driver. > > > > The driver currently supports the AM335x, AM437x, AM57xx and 66AK2G > > SoCs, and support for other TI SoCs will be added in subsequent > > patches. > > > > Co-developed-by: Andrew F. Davis > > Signed-off-by: Andrew F. Davis > > Signed-off-by: Suman Anna > > Co-developed-by: Grzegorz Jaszczyk > > Signed-off-by: Grzegorz Jaszczyk > > --- > > v1->v2: > > - Use PRU_IRAM_ADDR_MASK definition instead of raw 0x3ffff. > > - Convert 'len' argument from int to size_t type in all *da_to_va. > > - Return 0 in case of missing .resource_table for pru_rproc_parse_fw() > > (move the logic from patch #3 where it was corrected). > > --- > > drivers/remoteproc/Kconfig | 12 + > > drivers/remoteproc/Makefile | 1 + > > drivers/remoteproc/pru_rproc.c | 435 +++++++++++++++++++++++++++++++++ > > 3 files changed, 448 insertions(+) > > create mode 100644 drivers/remoteproc/pru_rproc.c > > > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > > index d99548fb5dde..3e3865a7cd78 100644 > > --- a/drivers/remoteproc/Kconfig > > +++ b/drivers/remoteproc/Kconfig > > @@ -125,6 +125,18 @@ config KEYSTONE_REMOTEPROC > > It's safe to say N here if you're not interested in the Keystone > > DSPs or just want to use a bare minimum kernel. > > > > +config PRU_REMOTEPROC > > + tristate "TI PRU remoteproc support" > > + depends on TI_PRUSS > > + default TI_PRUSS > > + help > > + Support for TI PRU remote processors present within a PRU-ICSS > > + subsystem via the remote processor framework. > > + > > + Say Y or M here to support the Programmable Realtime Unit (PRU) > > + processors on various TI SoCs. It's safe to say N here if you're > > + not interested in the PRU or if you are unsure. > > + > > config QCOM_PIL_INFO > > tristate > > > > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > > index da2ace4ec86c..bb26c9e4ef9c 100644 > > --- a/drivers/remoteproc/Makefile > > +++ b/drivers/remoteproc/Makefile > > @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o > > obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o > > obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o > > obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o > > +obj-$(CONFIG_PRU_REMOTEPROC) += pru_rproc.o > > obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o > > obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o > > obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o > > diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c > > new file mode 100644 > > index 000000000000..b686f19f9b1a > > --- /dev/null > > +++ b/drivers/remoteproc/pru_rproc.c > > @@ -0,0 +1,435 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * PRU-ICSS remoteproc driver for various TI SoCs > > + * > > + * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/ > > + * > > + * Author(s): > > + * Suman Anna > > + * Andrew F. Davis > > + * Grzegorz Jaszczyk for Texas Instruments > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#include "remoteproc_internal.h" > > +#include "remoteproc_elf_helpers.h" > > + > > +/* PRU_ICSS_PRU_CTRL registers */ > > +#define PRU_CTRL_CTRL 0x0000 > > +#define PRU_CTRL_STS 0x0004 > > + > > +/* CTRL register bit-fields */ > > +#define CTRL_CTRL_SOFT_RST_N BIT(0) > > +#define CTRL_CTRL_EN BIT(1) > > +#define CTRL_CTRL_SLEEPING BIT(2) > > +#define CTRL_CTRL_CTR_EN BIT(3) > > +#define CTRL_CTRL_SINGLE_STEP BIT(8) > > +#define CTRL_CTRL_RUNSTATE BIT(15) > > + > > +/* PRU Core IRAM address masks */ > > +#define PRU_IRAM_ADDR_MASK 0x3ffff > > +#define PRU0_IRAM_ADDR_MASK 0x34000 > > +#define PRU1_IRAM_ADDR_MASK 0x38000 > > + > > +/* PRU device addresses for various type of PRU RAMs */ > > +#define PRU_IRAM_DA 0 /* Instruction RAM */ > > +#define PRU_PDRAM_DA 0 /* Primary Data RAM */ > > +#define PRU_SDRAM_DA 0x2000 /* Secondary Data RAM */ > > +#define PRU_SHRDRAM_DA 0x10000 /* Shared Data RAM */ > > + > > +/** > > + * enum pru_iomem - PRU core memory/register range identifiers > > + * > > + * @PRU_IOMEM_IRAM: PRU Instruction RAM range > > + * @PRU_IOMEM_CTRL: PRU Control register range > > + * @PRU_IOMEM_DEBUG: PRU Debug register range > > + * @PRU_IOMEM_MAX: just keep this one at the end > > + */ > > +enum pru_iomem { > > + PRU_IOMEM_IRAM = 0, > > + PRU_IOMEM_CTRL, > > + PRU_IOMEM_DEBUG, > > + PRU_IOMEM_MAX, > > +}; > > + > > +/** > > + * struct pru_rproc - PRU remoteproc structure > > + * @id: id of the PRU core within the PRUSS > > + * @dev: PRU core device pointer > > + * @pruss: back-reference to parent PRUSS structure > > + * @rproc: remoteproc pointer for this PRU core > > + * @mem_regions: data for each of the PRU memory regions > > + * @fw_name: name of firmware image used during loading > > + */ > > +struct pru_rproc { > > + int id; > > + struct device *dev; > > + struct pruss *pruss; > > + struct rproc *rproc; > > + struct pruss_mem_region mem_regions[PRU_IOMEM_MAX]; > > + const char *fw_name; > > +}; > > + > > +static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg) > > +{ > > + return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg); > > +} > > + > > +static inline > > +void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) > > +{ > > + writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); > > +} > > + > > +static int pru_rproc_start(struct rproc *rproc) > > +{ > > + struct device *dev = &rproc->dev; > > + struct pru_rproc *pru = rproc->priv; > > + u32 val; > > + > > + dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n", > > + pru->id, (rproc->bootaddr >> 2)); > > + > > + val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16); > > + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); > > + > > + return 0; > > +} > > + > > +static int pru_rproc_stop(struct rproc *rproc) > > +{ > > + struct device *dev = &rproc->dev; > > + struct pru_rproc *pru = rproc->priv; > > + u32 val; > > + > > + dev_dbg(dev, "stopping PRU%d\n", pru->id); > > + > > + val = pru_control_read_reg(pru, PRU_CTRL_CTRL); > > + val &= ~CTRL_CTRL_EN; > > + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); > > + > > + return 0; > > +} > > + > > +/* > > + * Convert PRU device address (data spaces only) to kernel virtual address. > > + * > > + * Each PRU has access to all data memories within the PRUSS, accessible at > > + * different ranges. So, look through both its primary and secondary Data > > + * RAMs as well as any shared Data RAM to convert a PRU device address to > > + * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data > > + * RAM1 is primary Data RAM for PRU1. > > + */ > > +static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len) > > +{ > > + struct pruss_mem_region dram0, dram1, shrd_ram; > > + struct pruss *pruss = pru->pruss; > > + u32 offset; > > + void *va = NULL; > > + > > + if (len == 0) > > + return NULL; > > + > > + dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0]; > > + dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1]; > > + /* PRU1 has its local RAM addresses reversed */ > > + if (pru->id == 1) > > + swap(dram0, dram1); > > + shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2]; > > + > > + if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) { > > + offset = da - PRU_PDRAM_DA; > > + va = (__force void *)(dram0.va + offset); > > + } else if (da >= PRU_SDRAM_DA && > > + da + len <= PRU_SDRAM_DA + dram1.size) { > > + offset = da - PRU_SDRAM_DA; > > + va = (__force void *)(dram1.va + offset); > > + } else if (da >= PRU_SHRDRAM_DA && > > + da + len <= PRU_SHRDRAM_DA + shrd_ram.size) { > > + offset = da - PRU_SHRDRAM_DA; > > + va = (__force void *)(shrd_ram.va + offset); > > + } > > + > > + return va; > > +} > > + > > +/* > > + * Convert PRU device address (instruction space) to kernel virtual address. > > + * > > + * A PRU does not have an unified address space. Each PRU has its very own > > + * private Instruction RAM, and its device address is identical to that of > > + * its primary Data RAM device address. > > + */ > > +static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len) > > +{ > > + u32 offset; > > + void *va = NULL; > > + > > + if (len == 0) > > + return NULL; > > + > > + if (da >= PRU_IRAM_DA && > > + da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) { > > + offset = da - PRU_IRAM_DA; > > + va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va + > > + offset); > > + } > > + > > + return va; > > +} > > + > > +/* > > + * Provide address translations for only PRU Data RAMs through the remoteproc > > + * core for any PRU client drivers. The PRU Instruction RAM access is restricted > > + * only to the PRU loader code. > > + */ > > +static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) > > +{ > > + struct pru_rproc *pru = rproc->priv; > > + > > + return pru_d_da_to_va(pru, da, len); > > +} > > + > > +/* PRU-specific address translator used by PRU loader. */ > > +static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram) > > +{ > > + struct pru_rproc *pru = rproc->priv; > > + void *va; > > + > > + if (is_iram) > > + va = pru_i_da_to_va(pru, da, len); > > + else > > + va = pru_d_da_to_va(pru, da, len); > > + > > + return va; > > +} > > + > > +static struct rproc_ops pru_rproc_ops = { > > + .start = pru_rproc_start, > > + .stop = pru_rproc_stop, > > + .da_to_va = pru_rproc_da_to_va, > > +}; > > + > > +static int > > +pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) > > +{ > > + struct device *dev = &rproc->dev; > > + struct elf32_hdr *ehdr; > > + struct elf32_phdr *phdr; > > + int i, ret = 0; > > + const u8 *elf_data = fw->data; > > + > > + ehdr = (struct elf32_hdr *)elf_data; > > + phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff); > > + > > + /* go through the available ELF segments */ > > + for (i = 0; i < ehdr->e_phnum; i++, phdr++) { > > + u32 da = phdr->p_paddr; > > + u32 memsz = phdr->p_memsz; > > + u32 filesz = phdr->p_filesz; > > + u32 offset = phdr->p_offset; > > + bool is_iram; > > + void *ptr; > > + > > + if (phdr->p_type != PT_LOAD) > > + continue; > > + > > + dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n", > > + phdr->p_type, da, memsz, filesz); > > + > > + if (filesz > memsz) { > > + dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n", > > + filesz, memsz); > > + ret = -EINVAL; > > + break; > > + } > > + > > + if (offset + filesz > fw->size) { > > + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", > > + offset + filesz, fw->size); > > + ret = -EINVAL; > > + break; > > + } > > + > > + /* grab the kernel address for this device address */ > > + is_iram = phdr->p_flags & PF_X; > > + ptr = pru_da_to_va(rproc, da, memsz, is_iram); > > + if (!ptr) { > > + dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz); > > + ret = -EINVAL; > > + break; > > + } > > + > > + /* skip the memzero logic performed by remoteproc ELF loader */ > > + if (!phdr->p_filesz) > > + continue; > > I don't see the need to do all this if phdr->p_filesz is not valid. I would move > this below the check for PT_LOAD above. Otherwise people are looking for some > kind of hidden logic when there isn't any. The comment should probably go > after the memcpy(). ... and thinking futher on this, it would be nice to know why the memory isn't zero'ed out when a discrepency exists between the segment size in memory and the segment size in the image. Right now all we know is that it isn't done. > > I am running out of time for today and will continue tomorrow. > > > + > > + memcpy(ptr, elf_data + phdr->p_offset, filesz); > > + } > > + > > + return ret; > > +} > > + > > +/* > > + * Use a custom parse_fw callback function for dealing with PRU firmware > > + * specific sections. > > + */ > > +static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) > > +{ > > + int ret; > > + > > + /* load optional rsc table */ > > + ret = rproc_elf_load_rsc_table(rproc, fw); > > + if (ret == -EINVAL) > > + dev_dbg(&rproc->dev, "no resource table found for this fw\n"); > > + else if (ret) > > + return ret; > > + > > + return 0; > > +} > > + > > +/* > > + * Compute PRU id based on the IRAM addresses. The PRU IRAMs are > > + * always at a particular offset within the PRUSS address space. > > + */ > > +static int pru_rproc_set_id(struct pru_rproc *pru) > > +{ > > + int ret = 0; > > + > > + switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) { > > + case PRU0_IRAM_ADDR_MASK: > > + pru->id = 0; > > + break; > > + case PRU1_IRAM_ADDR_MASK: > > + pru->id = 1; > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + > > + return ret; > > +} > > + > > +static int pru_rproc_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device_node *np = dev->of_node; > > + struct platform_device *ppdev = to_platform_device(dev->parent); > > + struct pru_rproc *pru; > > + const char *fw_name; > > + struct rproc *rproc = NULL; > > + struct resource *res; > > + int i, ret; > > + const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" }; > > + > > + ret = of_property_read_string(np, "firmware-name", &fw_name); > > + if (ret) { > > + dev_err(dev, "unable to retrieve firmware-name %d\n", ret); > > + return ret; > > + } > > + > > + rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name, > > + sizeof(*pru)); > > + if (!rproc) { > > + dev_err(dev, "rproc_alloc failed\n"); > > + return -ENOMEM; > > + } > > + /* use a custom load function to deal with PRU-specific quirks */ > > + rproc->ops->load = pru_rproc_load_elf_segments; > > + > > + /* use a custom parse function to deal with PRU-specific resources */ > > + rproc->ops->parse_fw = pru_rproc_parse_fw; > > + > > + /* error recovery is not supported for PRUs */ > > + rproc->recovery_disabled = true; > > + > > + /* > > + * rproc_add will auto-boot the processor normally, but this is not > > + * desired with PRU client driven boot-flow methodology. A PRU > > + * application/client driver will boot the corresponding PRU > > + * remote-processor as part of its state machine either through the > > + * remoteproc sysfs interface or through the equivalent kernel API. > > + */ > > + rproc->auto_boot = false; > > + > > + pru = rproc->priv; > > + pru->dev = dev; > > + pru->pruss = platform_get_drvdata(ppdev); > > + pru->rproc = rproc; > > + pru->fw_name = fw_name; > > + > > + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { > > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, > > + mem_names[i]); > > + pru->mem_regions[i].va = devm_ioremap_resource(dev, res); > > + if (IS_ERR(pru->mem_regions[i].va)) { > > + dev_err(dev, "failed to parse and map memory resource %d %s\n", > > + i, mem_names[i]); > > + ret = PTR_ERR(pru->mem_regions[i].va); > > + return ret; > > + } > > + pru->mem_regions[i].pa = res->start; > > + pru->mem_regions[i].size = resource_size(res); > > + > > + dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n", > > + mem_names[i], &pru->mem_regions[i].pa, > > + pru->mem_regions[i].size, pru->mem_regions[i].va); > > + } > > + > > + ret = pru_rproc_set_id(pru); > > + if (ret < 0) > > + return ret; > > + > > + platform_set_drvdata(pdev, rproc); > > + > > + ret = devm_rproc_add(dev, pru->rproc); > > + if (ret) { > > + dev_err(dev, "rproc_add failed: %d\n", ret); > > + return ret; > > + } > > + > > + dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np); > > + > > + return 0; > > +} > > + > > +static int pru_rproc_remove(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct rproc *rproc = platform_get_drvdata(pdev); > > + > > + dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id pru_rproc_match[] = { > > + { .compatible = "ti,am3356-pru", }, > > + { .compatible = "ti,am4376-pru", }, > > + { .compatible = "ti,am5728-pru", }, > > + { .compatible = "ti,k2g-pru", }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, pru_rproc_match); > > + > > +static struct platform_driver pru_rproc_driver = { > > + .driver = { > > + .name = "pru-rproc", > > + .of_match_table = pru_rproc_match, > > + .suppress_bind_attrs = true, > > + }, > > + .probe = pru_rproc_probe, > > + .remove = pru_rproc_remove, > > +}; > > +module_platform_driver(pru_rproc_driver); > > + > > +MODULE_AUTHOR("Suman Anna "); > > +MODULE_AUTHOR("Andrew F. Davis "); > > +MODULE_AUTHOR("Grzegorz Jaszczyk "); > > +MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.29.0 > >